Reviews
Genuine Kohken Black brake caliper pan pin for Brembo caliper
I already upgraded the rear caliper for a lovely Brembo cnc one and also wanted to swap out the bsically horrible standar steel coloured pin for something that went with the black cnc colour of the caliper. I did find this from Kohken which I have never heard of but apparently is a really good brand. Hey, I don't mind giving a brand I do not know a crack. Besides, this was the only alternative I could find that looked as good as I wanted it to look. The price was really good value for what you get. I did have a few other parts in my order and got them all shipped together using EMS as my preferred courier. I honestly love EMS as they just get your order to you quickly and with no fuss. My order arrived in 5 days from shipping and everything was fine, no issues at all. The pad pin was in a nice little Kohken plastic packet. The pad pin itself is super well made. It has a loveley texture to it, very smooth indeed. The anodising on this is brilliant and really brings out the curves of the pad pin. There is also a nice little neat logo on the end of the pad lin which is cute. Once fitted, the rear caliper now looks amazing and gone is the horrid looking steel standard pad pin. Really happy with the purchase. Thanks Webike and awesome work Kohken. View detail
Replace with new one
When replacing the brake fluid, the hose clamp was also replaced along with the oil hose.
It was helpful that Single Item sold it at an affordable price.
View detail
I hear it breaks down a lot. 。 Looks like it's been taken care of.
Wiring has been removed from the mounting of the switch.
I tried to do it because others were consolidating ahead of me, but it was a little different, as if they had taken measures.
I hope it doesn't get torn off.
View detail
I will never ask again.
I had never asked for anodizing, but the corroded areas were untouched and anodized as they were. The appearance and finish looked as if it had been sprayed with matte LacquerSpray by an amateur.
I asked for this as a Large hand, but I have nothing but regret.
I personally recommend powder coating.
View detail
Silver texture was different from Image.
I had originally installed a silver lever from Eukanaya, so when I switched to Brembo master, I ordered a silver lever to match the color of the Clutch Side.
The delivery time was said to be about a month and a half for made-to-order, but in reality it took less than three weeks?
When I opened the product I received, it was Mat silver. To be precise, the surface has been treated with a fine Hairline-like finish, giving it a very luxurious look. The atmosphere is Large person with a calm texture. However, I was somewhat disappointed because what I was expecting was a bit more glittery silver like Eukanaya.
The product itself is of unquestionable precision and workmanship, and the design is cool. The best part is that, as stated in the product description, the curve line on the lever is gentle and does not interfere with the switch box. The switch box of cbr250rr is big thanks to the electric throttle, so the standard lever would interfere with the switch box when I hold it down. Although it is a Level that does not affect braking power, it is not pleasant to have the brake bottom out. It can be said that it is necessary to change to a KOKEN lever.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
very durable, strong, no leaking
I've installed 3 Kohken mesh type oil tank hose on my motorcycles for 3 years and now on Hayabusa. It's high quality, very durable, strong and no leaking. It has 2 clip available which is a advantage for being ready to install. View detail
cool and solid
I installed Kohken bleeder bolt on Brembo 19 MCS brake master cylinder, it fit very well and solid. I've chosen titanium coast treatment, it look very cool. View detail
To install a 320mm disc on a '21 ZX-6R!
From the first play with the Brakes in 2023 to the Master Cylinder, Brake line, Caliper, and Clutch replacement, it was finished. The only thing left was the disc, and I had a long-sought brembo at the summer We-BigSale.:I purchased a Floating Disc. 310mm OEMDisk size would have been fine with the 9mm PLOTOffset collar I have been using, but I purchased a 320mm…OEMSizeOver, so the Offset collar was also changed.
To select an offset collar, I borrowed an 11mm offset collar from a friend and measured it. However, when I selected 14mm, the measurement result showed that the pad contact surface slightly protruded from the disc. Therefore, we decided that 13mm Offset collar by KOKEN would be the best choice! I decided to go with the 13mm Offset collar by KOKEN. The color of the collar is black, and while PLOT's Offset collar is matte black, Koken's is glossy black. The OEM dwell pin fits perfectly, as expected of made in Japan quality. The only complaint I have is the cushioning material. It is a thin and thin Nylon cushioning material and I don't notice it even if it falls on the floor or table. The only complaint I have is that the thin, dusty Nylon cushioning material is too thin to notice if it falls on the floor or table. (Chuckles)
View detail
![Mechanical Clutch Holder AVANZA [Avanza] Holder Only L-29mm](https://img.webike-cdn.net/catalogue/images/74753/g_1_TS.jpg)
Fits: Others
It's cool.
Clutch master and DesignMatch are also good.
Texture and lightness of Clutch are also excellent.
View detail
To prevent corrosion of homemade Bracket
Only the Offset collar of Caliper was noticeable in Black with Luster, so I re-anodized it in Matte Black with KOKEN Alpack10.
Since up to 10 items can be processed in the same color, we also included a self-made switch bracket made of aluminum plate.
Please note that when sending to Kohken, it takes at least 3 business days for delivery and about a week after arrival because of regular mail.
I was told that the stamps on the envelopes were too much because the items were lightweight this time, but I didn't want to peel them off, so I sent them out as they were.
When I checked the returned items from the Anodized Treatment, the Offset collar was not as matte Black as I had Image, but this is a Material surface issue, so it can't be helped.
And to my surprise, I was very pleased with the homemade Switch Bracket I made from an aluminum plate, which turned out to be exactly the matte black that I had Image.
Aluminum base? If it is an aluminum base, the color may be very beautiful.
I would like to use this service again next time I need Anodized Treatment.
View detail
The escape process is outstanding.
I bought this as a replacement for VERSION 1.
The lettering of Koken is also very Parenthesis bad!
Why would they want to include the company name?
I don't think OHLINS or brembo's Third party should include Logo or company name.
I would choose Plain even if it costs +1000 yen more.
Be that as it may, there is a hole in the lever and the end meat removal. I wonder if it will work, bremboOEM hasn't done any special modification to it, so maybe it won't be very effective!
I'm not sure, but I think the Mocha is very cool.
Switch Box has excellent escape processing.
It's like I bought it for this feature in the first place.
It's not just about the size or appearance, it's also about the Large.
That's why the word KOKEN is so bad in Parenthesis, maybe I should use a Touch pan and put in Red color.
I purchased the Standard Type this time.
The color is close to brembo, so I think it's good.
View detail
Brake master lever replacement
The CORSA Corta Lever is slim and I felt uncomfortable from the thicker Lever I had been used to, so I replaced it with Koken's AeroLever.
Basically the finger Quantity:Since it is a 2pc hang, I selected the Short lever which is available in stock.
However, the grip was as expected, but it was too warped compared to the OEM Lever, or maybe it is because we have small hands, or maybe the Lever was too far away and we failed even though we set it at the front of the Lever adjustment range of the CORSA Corta….
At any rate, I managed to get to the acceptable Limit position by changing the CORSA Corta Lever play from NORMAL to SPORTS.
Normally, I would prefer the RACING position, which is much closer, but since it is play 0, I thought I would get used to the Sports Response for a while, and if it feels uncomfortable, I would try the RACING position.
I often put my finger on the tip of the lever, but is the base of the lever (closest part) correct? （Is it correct to put your finger on the base of the lever (the part closest to the base of the lever)? If you put your finger near the tip of the lever, the lever may be too far away.
View detail
for Racing CaliperPad spring
By installing on a 4POT 40mmRacing caliper that is not equipped with a pad spring, it reduces the annoying pusher-pusher sound caused by pad play during BrakeFree. I bought it to try it out, since it is described and seems to have a good reputation.
The color is beautiful when new. I am looking forward to the change after installation.
Selling price, it would be helpful if it were a little cheaper.
View detail
All Screw arrived instead of half Screw.
I ordered a 65mm to install a radial mount caliper, but received an All Screw instead of a half Screw.
When I bought the 75mm before, it was semi-screw, but, I didn't use it for Caliper installation.
View detail
Exclusive for Brenbo CNCCrabRear caliper
Pushing sound does not bother me as much as in Left, but I installed it because I thought it would be effective in reducing caliper wear on the Pad sliding surface.
I like the fact that they are inexpensive parts and can be easily purchased.
I have the impression that BrakeTouch is better with the sp with out ring, but I have the impression that many people may not be able to see the change.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch), Others Radial master cylinder(Brake/Clutch)
Durable hose
Excellent quality of brake fluid hose, it is easy to install and have been using it for 5 years plus, and still no leaking. Recommended View detail
Fits: Others
Clutch Side is also unified with RCSMASTER
What made you decide to buy?
I had changed to brembo 19RCS Master Cylinder and wanted to unify the clutch side with RCS MASTER, but I had extra income, so I decided to use "KOKEN".:I purchased "Mechanical Clutch Holder L-29 Aero Lever Set". 。 I really wanted to go with bremboLeverSpec. but recently there is no bremboLever Kit for sale, so I bought Lever as Single Item. Well then. Why didn't I buy Holder Only?" is … The included AeroLever is a spare part in case of emergency!
[How was the installation?
At the conclusion … it was quite fiddly. it was easy to remove the OEM Clutch holder and Lever, since I had replaced the U-KANAYA Lever before. (Don't forget to loosen the Clutch Cable including the one on the body side before starting the work!) If the OEM Clutch holder comes off, Kohken:I am trying to install the Mechanical Clutch Holder, but the Outer end of the loosened Clutch Cable does not fit. (Sweat) If you force the work, it will cause scratches. After thinking about it, we separated the Mechanical Clutch Holder from the Lever, and put the Outer End on the Holder first. (ZX-6R uses the included Wire Spacer.) and align it with the PunchMark in the Handlebar, and then use the HolderBolt (7.8Nm) Next, attach the end of the ClutchInner cable to the lever that was removed and merge it with the Holder. Next, attach the end of the ClutchInner cable to the lever that was removed, and attach it to the holder to complete the process. (This is the same method as the Lever replacement process.) The Koken instruction manual does not go into detail, so if you are not comfortable with the work, you can leave it to PRO.
[work reference …]
Before loosening the nut that fixes the clutch cable on the body side, measure the length with Caliper before loosening it, so that it will be easier to adjust the clutch after the work is done. 。 It is also a good idea to lubricate the Clutch Cable as you remove it. 。 KITACOConvenienceParts for Roller Type Micro Switch:110"/3-pole Connector set (Black color) and processed to the same color and etc. Spec. as OEM. (Please make sure the Switch is working!)
How was your experience with it?
In the description field. It won't be as light as the 24mm Ratio, but lighter than the Normal." I couldn't see any change in the ZX-6R because of its AssistSlippers mechanism, which makes it very light even with the OEM clutch. However, I felt that the clutch was sharper and lighter than the OEM, which I may experience during long distance touring and city driving in traffic. 。
[Others]
Holder color was selected as no option. The color is not the same as brembo19RCS Master Cylinder, but it is close enough. Also, the RCS OEM clutch lever replacement and sticker will further enhance the compatibility.
View detail
Very good Size
[How is it used?
Touring, city driving
Was the one you received as per Image?
Street Image
Was the installation difficult?
It was easy.
How was your experience with it?
It was good
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
Easy to rust
View detail
Fits: Others
Replace Pivot pin on Short Stroke
I have no problem with bremboOEM Pivot pin, but I replaced it with BlackXCoat Pivot pin made by Koken to match Bleeder Bolt.
Installation was not a particularly difficult task since all we had to do was remove and replace the OEM pin.
Compared to OEMPin, the quality of the finish is very good and Material:Since it is Breck XCoated with Stainless Steel, I expect that it should be rust resistant, as we don't do much maintenance such as washing the car.
As for the weight, I forgot the Scale, but since it is the same iron-based material, it probably won't be any different.
View detail
Watch the direction of travel
The Brake Pads are very noisy, so I installed the Brake Pads. (The one that is wide horizontally) It should be correct to attach the letters Eva TEC as they come. View detail