Reviews
Cheapest of all GIVI products
Cheapest of all GIVI products I was using a HONDA GORILLA for commuting and was looking for a rear case that would fit my bags, etc. After asking everyone's opinion, I decided on a brand first because GIVI products had a good reputation. I decided on the smallest and most reasonably priced product because I knew that using a too large rear case for the GORILLA would make it look unbalanced. I use it to store my bag when commuting and my helmet when parking. The quality is good and the installation was easy. I am very satisfied. View detail
It's suitable for a long drive in a GEAR car.
Just right for two pieces of Rain Wear and a Riding jacket.
One of them has a built-in Protector and is not bendable Type.
View detail
Fits: HONDA BENLY110, HONDA BENLY50, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CT125 CT110 HUNTER CUB
Slightly heavy, but capacity is satisfactory
[How is it used?
Used in JA60CROSS CUB.
On the commute to work, there is still room for a change of clothes, lunch box, and water bottle.
Touring allows you to load up on souvenirs.
Was the one you received as per Image?
It is the best balance for CROSS CUB.
I love it
Was the installation difficult?
It is easy. However, if you have OEM Attachment.
OEMAttachment (08L70-K88-J10)
How was your experience with it?
Satisfactory, but sometimes the box hits my back, which reduces the freedom of the Riding posture.
Also, it is heavy. It is not heavy enough to affect driving, though.
It may be advisable to take measures to prevent noise when driving over bumps and other obstacles.
[Included Parts:were they on?
Large Durable
View detail
SHAD's upscale
SHAD with Reasonable Image, like SH40, also has a proper upper series.
First of all, it is obvious at a glance that the lid is elaborately made, but after using it, you can feel the moderation in the way the lid closes. The lid does not suddenly slam shut when you accidentally let go of it. If you compare it to an entrance door, there is a difference between a lower part and a high-class apartment.
The key is a high-grade inner-slot type, which is also smooth to insert and remove. Since the lid can only be locked with the key, it is structurally impossible to lock the lid with the key, which provides a sense of security.
It is shaped like a rice ball when viewed from above and is large enough to hold two helmets and a standard Boston bag. Of course, there is no need to worry about rain. The bag is also equipped with a belt to hold the luggage in place, which is not visible in the picture.
The weight of the carrier is more than 6kg including base, so it is not realistic to install it in an ordinary external carrier, and if you want to use it on such a carrier, you will need some kind of device. We are using Hepco's SpeedrackEVO for our carriers. [Color] Cleared
It is also regrettable that Base is not backward compatible and cannot be used in conjunction with Smaller Type according to the amount of baggage.
View detail
This is it!
I was using GIVI's E370 but wanted just a little more capacity, so I bought this one.
Size and capacity as expected, no complaints.
No complaints about the quality.
It is also good that the box can be opened and closed without locking the key. (*´∀`) b
I use the Rear box for my commute to work, and I can't stop using it.
Spec. above, diagonally (Trucketc.) I'm thinking about adding a Stop-lamp to the box, because the Stop-lamp becomes difficult to see from the …
View detail
It is very convenient and the situation of installation is also Parenthesis good?
Depth than expected (height) The room has a large storage space and can hold a lot of luggage.
The Case itself is easy to install and remove.
It's great because I can go to Touring and buy fruits and vegetables that I couldn't buy before. (Lol)
I also drove about 300 km in the rain and there were no leaks and the waterproof property was perfect.
However, when I put a lot of luggage in it, it sometimes bit the locking mechanism and would not open.
View detail
Fits: HONDA BENLY50, HONDA BENLY110, HONDA SUPER CUB 50, HONDA CROSSCUB110, HONDA BENLY50, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA CT125CT110 HUNTER CUB, HONDA BENLY50110, HONDA SUPER CUB110, HONDA CT125 CT110 HUNTER CUB, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA BENLY50 PRO, HONDA CROSSCUB110, HONDA CROSS CUB
CUB BUSINESSStyle
Brass Chic Material Scuff marks, etc., will be noticeable.
Excellent storage capacity.
I think it's a Large size for everyday use.
View detail
High capacity
Used for commuting and touring, as helmet and jacket fit together.
Capacity is high.
The only minus point is that the lid is slightly harder to close than other GIVI cases.
View detail
First replacement in 5 years
[How is it used?
I have been using it for 5 years and it is getting old, so I bought a new one.
Was the one you received as per Image?
Five years ago, rounded boxes were in vogue, but now square boxes seem to be in vogue.
Was the installation difficult?
It was installed without any problems.
How was your experience with it?
The old box was 30L, but this time it is 32L, which is large enough to hold a lot of luggage and is very useful.
[Included Parts:were they on?
It came with it, but you may not need it!
[Was there anything that disappointed you?
Mounting Bolt is long, so when installed, the bolt is visible from the back and does not look good.
The old box had an underlay, but this time there was nothing, it was naked.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I'll buy GIVI products for other motorcycles!
About the feeling of use I use this product for my SCOOPY110 which is my shopping bike. The quality of GIVI products is really great. The E260 has a small capacity of 26 liters among GIVI products, but it can hold a small shopping without any problem, and depending on how you put it in, a jet helmet and a half helmet can fit in it. I own other bikes and would use GIVI products again. View detail
Purchased for commuting
I had an E370 on, but it was a little too large for my commute, so I bought it.
Most of the 1-button type are under 30 liters, so we decided on the 2-button type, which can be opened and closed easily.
I'm tired of seeing RedReflector at 370. (Lol) The key is red, which is confusing with E370, and TECH, which is smoked and has a black key, was selected.
GIVI has a common Mono-lock base, so I just had to replace it.
For a sports type like CBR, I think this size is the most balanced. However, when buying souvenirs at touring destinations, some items may not fit in the bag. However, when buying souvenirs at touring destinations, it may not be able to fit in the bag depending on what you buy.
So I would like to use the E300 for commuting and replace it with the 370 for holiday touring.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA XMAX
Yamaha Euro Top Case 50L
Upgrade 39L top case to 50L for extra luggage space. Quality build very good and convinient to use with single key lock. Case is easy to carry with attach handle. View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, SUZUKI BANDIT600S (GSF600S), HONDA CBF500, HONDA CBF1000, HONDA CB1300SUPER BOLDOR, HONDA CB750, HONDA CBF1000, DUCATI MONSTER1100EVO, HONDA CB650F
Matching like an OEM
Installed on HondaFORZA250.
I like the color and appearance of the MATCH as if it were OEM.
It is reliable with no vibration etc. when running.
IMPRESSION DETAILS
0Base (sold separately)
We wanted to keep the height as low as possible, so we installed the Universal type Monokey base on the FORZAOEM Carrier, and it was installed as low as we wanted it to be.
I have not been able to find a Universal type Monokey base from Daytona. Webig does not sell them, but GIVI does, so I looked elsewhere.
I did not need a bracket in two places, and in the other two places, I connected the bracket with a slight slant.
Since the Monokey base is large, the Bolt connection with the Carrier was made as wide as possible to ensure good balance.
The Bolt threads do not reach the Nut loosening stop due to the lack of length of the Bolt in this diagonal section. (Bolt will be replaced again).
0Stop lamp (sold separately)
https://www.webike.net/sd/21113309/
Please check out our impressions on ↑ as well.
I think a retrofit Tail lamp is necessary because of the proximity of the Carrier and Box to the Stop lamp.
0BOXBody
The storage is not so good due to the many irregularities inside.
I have a 2mm thick non-slip Matte from 100s on the bottom of the box. I think that's why ↓
I have a GT-Air2 and NeoTEC2 from SHOEI and the lid does not close. (Please check by yourself).
I am thinking that I could have bought a 1Size larger one, though I might be able to store two helmets if I pushed myself. I am also thinking that it would have been better to buy one size larger.
I like the balance of the appearance, including the large size.
I use it in the summer, but I have to be careful when putting food in it because it gets hotter than expected.
that's all
View detail
GIVITop case
I have just purchased a GIVI Aluminum Case!
The large capacity will allow you to enjoy camping touring.
I would like to do a lot of touring with Top case.
View detail
TECHSpec. is good in chic.
I bought this to store my Helmet at my Touring destination.
TECHVERSION is chic and recommended.
It is a quintessential GIVI, easy to use and well built.
View detail
Rear box
It is very solid and easy to open and close.
I saw the installation on YouTube and installed it, but I used it without the bracket overseas. I tried to install the bracket because it was included, but the bolt on the motorcycle side was so hard that it licked the bolt, so I gave up. I don't have the guts to put heavy things on it, so I'm going to leave it as it is. I'm going to leave it as it is because I have a type that almost all souvenirs are delivered by parcel delivery service.
View detail
Great product!
Great product! Excellent fit and finish. Easy to install. Instructions in Japanese but you can use Google Lens to translate with your phone. Fits the 2020 USA spec (look at tail light/rear turn signals!) C125 Super Cub very well and even allows you to keep the Honda package rack (if installed). Sits pretty high, but my wife says it does not seem to affect the bike's performance or handling. Easily stores my XXL Shoei Qwest helmet with room to spare. First purchase from Webike, they communicate very well and exceeded my expectations on shipping. I will be purchasing more from Webike. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA XMAX
Convenient anyway.
I wanted to go full Pannier and bought it anyway.
Easy to use, no wobbleetc. and high quality.
OGKCUBT Aero Blade5 and SHOEI X-14 with Income attached.:2pc. Set storage was possible.
At any rate, Large is convenient because you can put in bonbons of luggage.
View detail
Fits: SUZUKI Vstrom 250, SUZUKI VSTROME 250 ABS, SUZUKI Vstrom 250, SUZUKI VSTROME 250 ABS
Makes me want to travel.
It is Exactly on V-STROM 250.
It has a capacity that will be useful for small shopping, touring, and commuting.
When I look at the Top case while driving, it wobbles unexpectedly, which makes me a little nervous.
However, I have used it for about 4 years and it has never fallen off, so I think it is Large sturdy.
I think the waterproof property is high. There was no flooding even when touring in the rain.
The top case weighs approximately 5.5 kg, and the side cases weigh 5 kg each.
Note that the handling changes depending on whether there is a Case or not.
View detail
Large is also Small
I ride my Motorcycle with my study bag in my Depack when I go to the library to study, and the Rear box is also useful to put my helmet and rain gear in.
The size that 1pc. of full face helmet can easily fit in was about 37L, but when I put the helmet in, I took out the rain gear and other contents once and put the helmet on the floor, and I had to repack what I took out in the space between the rain gear and the helmet, so it felt quite tight with 37L, so I took a chance and bought this 43L. I decided to go with the 43L. I felt that the 37L was too tight, so I decided to go for the 43L. A little bit of tools can easily fit in it.
If you choose between an oval and a square, the square one can hold more things. I bought a box of pizza, but I could fit a 25cm box of pizza in it. The top plate is also flat, so there is no need to say anything about the mechanism to fasten it with the included rubber net.
The biggest concern was whether the tandem seat would not be crushed by too much charge, but I attached the base plate with 1/3 of the base plate sticking out from the carrier, and I think it fits in the tandem seat if you are thin like in the picture? But if you attach the base plate with 1/3 of the base plate sticking out from the carrier and if you are slim, I think it will fit in the tandem seat.
I think the Tandem seat will be crushed about 1/3 of the way down if you put it on too tight.
I think Large is sturdy as long as you don't put anything too heavy in it.
Photo? It's pretty big in appearance, as you can see in the
Photo? It is also powerful when viewed from behind, as in the photo?
Base plate installation was quite difficult because the front net bar was too thin and the clamps were too scanty for Gixxer's DAYTONACarrier, making positioning quite difficult.
In conclusion, maybe you should temporarily fix the back side first, and then fix the front side.
Photo ? is the back side and photo? is the front side.
Photo? The base plate in the photo is not that bad in terms of parenthesis.
I'm going camping in September, so I decided to go with this one, but I think it's a little too large for normal use;
Mono-lockSpec. has a common base plate, so it can be a little smaller, so it may be changed depending on the application.
My concern is that the Gixxer stop lamp is visible at the height of a passenger car, but just barely at the height of a van? We may have to think of something to work with the stop-lamp.
By the way, the AGV Sticker is sold separately and not included.
View detail