Reviews
To protect the license plate.
[How is it used?
I searched for a License Plate Holder on Webike to protect my SEROW225WE License Plate. I was looking for the cheapest product and came across KITACO's product.
How was your experience with it?
The appearance is that of steel with plating, so the Material:If you compare it with the products that are Anodized Treatment for each color in Aluminum. Cheapness." cannot be hidden.
However, the motive for purchasing License Plate protection that bends every time I go out to play in the mountains." Therefore, since they are going to be bent anyway, Cost is more important than texture.
How did it compare to other products?
As I said above. "Cheapish" The price is actually cheap, so there is nothing to be done about it.
Material of the same thickness, perhaps due to the material of steel:It is a little more rigid than the Aluminum product, and so far the License Plate has not bent.
[Points to note]
The product is made of steel with plating treatment, so it will eventually be rusted if scratched.
Even without Wound, Rust may be unavoidable depending on the environment, so it may be better to protect it with Wax or similar.
There is a possibility that you may get hurt if you handle it roughly with your bare hands. [Color] I sprayed ClearSpray.
Other items that would be helpful
The deciding factor in the purchase
Cheapness, that's what it's all about.
In my case. "the expendables" However, if you are looking for texture, Material:Aluminum and Material:I think you will have less post-purchase regret if you consider Carbon's other products.
【Included Parts:presence or absence】.
Only one Plate is available.
Simple, low price, just the right product for me.
[ITEMS TO BUY TOGETHER
The existing Bolt can be used to install the License Plate with no problem, but it may be a good idea to add an Aluminum Collar or CoolBolt (if you are in an area where theft is common, you may want to consider an anti-theft Bolt).
Opinions and requests to Manufacturer.
We look forward to a long-lasting Lineup for Cost-conscious Users.
View detail
Bolt part to Custom
[How is it used?
License Plate Bolt to Custom
Was the one you received as per Image?
Yes, it was exactly what I expected.
How was your experience with it?
Bolt section is now custom made.
[Points to note] It takes a little time to install.
How did it compare to other products?
No comparison, so no.
Other items that would be helpful
None
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
When installing on CT110 HUNTER CUB, it seems to be easier to loosen the Rear Reflector, though.
View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91947_1_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
For One point in the License Plate Department!
I purchased it as a one point accent for the license plate section, and as a result of installation, the license plate section looks tighter! View detail
Fits: Others Universal
It was a little too flashy.
I bought this for Number protection and dress-up.
I imagined that the License PlateBody would fit in the body, but it was not quite large enough, so it stuck out. I had to put the attached cushion on it because it floated.
The frame itself is a bit Large, so in the case of Gold, it was an unfortunate point that it would stand out too much.
I think it is an Exactly product for those who like to be flashy.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Simple but well-made License Plate Bolt
I bought it for Dress-up for One point.
The screws on the license plate are the same for all car models, so I think it will fit most large car models.
After several years of use, the color has not deteriorated and there are no bald spots.
Parenthesis has a simple structure with a slit design that is compatible with other PremiumZone products.
View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91946_1_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
DAYTONA for peace of mind
Since I installed the Fender Eliminator Kit, I wanted to change the License Plate Bolt as well, so I bought it. I bought the blue color to match the color of the car body, but the anodized blue color is also shiny and matches well with the car body. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Thick and solid product
It is the same size as the Number, so it is not suitable for those who want to dress-up the outer frame of the Number, but I think it is an excellent choice for those who do not want to bend the Number. It is thick and the texture is not bad. View detail
Fits: Others Universal
License Plate Reinforcement
I was riding my CB1300SF and was rear-ended by a car and although I did not fall over, the License Plate was bent. I bought a Plate Stabilizer and installed it to avoid any more rear-end collisions! View detail
Special Material to prevent damage
This number base is a resin containing glass fibers, which is also used in handguns. It is the same class of material as that used in handguns used by the military, and is not likely to crack unless the vibration frequencies match.
The design is martial but the finish is excellent, not a single BALI.
The resin material is thick enough to prevent squeaking, and there is even a rubber bush on the lower part of the plate.
The color is Black only, so it may not be to your taste, but the texture is good, so it is an option.
This is an ideal product for those who want a shibu Number base.
View detail
The License Plate is bent, so it is reinforced with a License Plate Holder!
I was looking for an inexpensive License Plate Holder before the License Plate bent into a squishy mess, and I found KITACO's License Plate Holder!
I like it because of its simple design and good texture!
View detail
License Plate Protection
I purchased this to protect my License Plate and it fits my License Plate perfectly without any size problem. View detail
Fits: Others Universal
To prevent unexpected bending.
[How is it used?
It took some time to restore the LITTLE CUB that was given to us by hanghang, but we managed to get it into shape and acquired the numbers for public road driving.
Was the one you received as per Image?
It is not a type of holder that protrudes a large amount from the perimeter of the license plate, but a type that works quietly on the reverse side of the license plate, so it was exactly what I had imagined.
Was the installation difficult?
Bolt and Nut in 2Quantity:Set Loosen and remove the License Plate, insert this product into the NumberReverse side, and tighten the supplied bolt from the rear side with the nut.
This is a Custom that can be done by even beginners in Motorcycle maintenance.
How was your experience with it?
Quantity:Pair (for Left and Right) and the Holder protrudes just a little bit on the underside, but it looks great.
In my case, I purchased the black color, but I felt it was tasteless, so I put Carbon Style Decal on it. It is not noticeable at all, but it is enough to satisfy my self-satisfaction.
[Included Parts:were they on?
License PlateStabilizer (aluminum plate with cut-outs) Body and 2 quantities of Bolt and Nut for License Plate fixation.:Set, for preventing resonance caused by vibration? UrethaneTape is included in the package.
[Was there anything that disappointed you?
Personally, none at all.
If you want to make it stand out even more, there is also a lineup of types with edges, so please check out Webike's product introduction section for more details.
Other items that would be helpful
Point and hang of installation
The holes for fixing the bolt on the License Plate Stabilizer side are slightly larger and wider, so please adjust the holes to your liking when installing the number and bolt to the car body together with the number.
Installation with proper Torque management.
When installing in a vehicle with a lot of vibration, it may be safer to apply Screw lock agent to the nut on the back side or replace it with a Lock nutType nut.
[Availability and clarity of the Instruction Manual
I think a simple Installation Instruction Manual was included...sorry my memory is a bit fuzzy.
I think it is a top level product in terms of ease of understanding.
[Points to note]
As I mentioned above, it is about proper Torque management.
Install it securely so that it will not fall off while driving.
[ITEMS TO BUY TOGETHER
There is no shortage of basic installation with this product alone.
As mentioned above, consider using Screw lock agent or lock nut as a self-protection measure when used on a vehicle with a lot of vibration.
Opinions and requests to Manufacturer.
The abundance of trapezoidal and rectangular types and lineups is very helpful when making purchases.
View detail
Functional Parts for a Bland Bolt
[How is it used?
For fixing Bolt of License Plate of SEROW250 which is used for mountain play.
Just by replacing the inorganic fixing Bolt with this product, it will look better, and it can also be used as a Net fixing Hook for when you have a lot of baggage. Two for the price of one. PARTS.
Was the one you received as per Image?
I saw a friend's Motorcycle that had already installed this product when I didn't know it existed yet. What is this aluminum color that looks like a very small version of the Tezuga?" When I asked him about it, he told me that it was a product installed for the above-mentioned purpose, so I immediately took a crack at Ideas.
The product was as per Image because of such a process of purchase.
Was the installation difficult?
The difficulty level is low because all you have to do is remove the bolt that was attached to the License Plate and install this product, and I think that anyone can easily customize this part.
How was your experience with it?
Most of them are free dress-up parts, but they are used for fixing the Hook of Net for Motorcycle when we carry a lot of luggage with Motorcycle, which happens a few times a year or not.
It is seldom used for functional purposes, but it is useful when it is.
Well, it's a bit of a duplication. Color Anodized Aluminum Collar Dress-upSmall things.
[Included Parts:were they on?
As you can see in the picture, each color Aluminum Collar, Cap bolt (length is about 20mm?), Nut, Nylon washer×2 and 1 piece of Iron Washer are included. and Nut and Nylon washer×2 and 1 piece of iron washer is 1Quantity:Set, and itsQuantity:Two Sets are included in the package.
[Was there anything that disappointed you?
My friend who used it before me bought the Red one, but after about a year or so the Anodized staining faded and it became just Silver, so he painted it Red with plasticolor and dyed the hollow side line White (it was exactly the Image of Zunga).
Anodized light colors may fade quickly.
Other items that would be helpful
Point and hang of installation
Even though the collar is sandwiched, it is basically a fixed Bolt. "Tighten with the proper Torque." I don't think there is a problem as long as the
"Loose and falling off." If you are concerned about the "Mere Old Man", it may be a good idea to replace the existing nut with a Lock nut.
[Availability and clarity of the Instruction Manual
No Instruction Manual, as noted above. Bolt & Nut+α for fixing So no problem.
It can be used not only for fixing License Plate, but also for fixing M6Size, so it can be used in various ways depending on each individual's Ideas.
[Notes]
Not particularly
[ITEMS TO BUY TOGETHER
Basically, no.
Bolt & Nut, Aluminum Collar, and Washer in Quantity:The set is complete, so if the purpose is to fix the License Plate, this product is all you need.
[Opinions and requests to Manufacturer
2Quantity:Considering that the Set costs about 910 yen, I would like to request a more UV-resistant dye.
View detail
Slight appearance change
I was looking for a Case to put my CALI certificate in and happened to come across it in a search and it was cheap, so I bought it.
I didn't like the position of the Sticker on the local number, so I'm glad I chose this one.
It is a product that is only for appearance, but I think this kind of product is also interesting and White.
View detail
Fits: Others Universal
with Reflector Black
Easy to install with good design and product precision.
The vehicle on which the SlightRear Fender was installed is a Z900RS with ARCHI's SlightRear Fender.
The number base that comes with the SlightRear Fender is designed to be installed using an OEM reflector, but the OEM reflector was not the right width for my taste, so I purchased this product with a narrower reflector instead.
The supplied Bolt nut and FlangeSpacer were not used because different ones were installed.
I did not use the urethane sponge, but I am satisfied with the appearance of the Image without any resonance.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Good. ??
In my case, I could not install other holders because they interfered with the bracket of the driver's license plate, so I found this product, which is the same size as the Plate, and purchased it immediately.
The License Plate is the same size as the License Plate, so if you do not have enough space to install the License Plate, you can use the "Large" Recommendation!
It is a fairly sturdy Plate-type Holder, so you no longer have to worry about bending the License Plate by catching your foot or Cover. ^o^
View detail
Fits: HARLEY-DAVIDSON FLFB, HARLEY-DAVIDSON FLSL, HARLEY-DAVIDSON FXBB
Number bracket kit
Refreshing around the Number.
Parenthesis I got better.
View detail
Simultaneous installation with Fender Eliminator
I put it on because I thought it would help eliminate the cheapness of the bare Number. The angular design fits well and keeps the number position from looking unnaturally high. View detail
Fits: Others Universal
For License Plate protection
I purchased this to protect the License Plate. As other reviewers have mentioned, the License PlateBody does not fit into the groove of the Frame perfectly. I don't know if this is the reason for the cushion material, but I think the PlateBody will have to be lifted a little. I think that people who purchase this type of frame probably want to fit the license plate into the groove of the frame. If you cannot fit the license plate into the groove, we recommend you to purchase the type without groove. View detail
Prevention of License Plate cracking
The rim and claws are attached to hold the License Plate in place. View detail