Reviews
Defective item?
Is it a long-term storage, or is it a matter of the Material itself, in a month or so before? - - -
I can not fulfill the role of Bleeder Cap at all.
View detail
Material is bad
Half a year finally?
In the first year, it turns into white, of which Crack comes out and it breaks and it breaks.
I want you to change the material.
Rubber will not do!
Please make it with Silicon.
View detail
Rubber's quality is the first one!
OEM Product is Black color, so I just wanted to change it and purchased it. After exchange (1 week) Rubber's discoloration and cracking have occurred in less than enough. Because it is inexpensive compared to OEM, there will be no help for it. View detail
I did not notice that it might be surprisingly good.
Webike I saw it happened by looking at it, but I thought it was even better to attach it.
Quantity : 1 Set of 4pcs. So surplus 1pc. I tried it, but it is not good!
I have to buy a part of my car..
"Minkara" I posted to TOYOTA 86 and it was quick! I came!
I want to try various colors.
It is a product I bought about something.
View detail
A crack came in in 2 weeks after installation.
5 / 21, after 2 weeks 6 / After confirming to 4, there was a crack in the entire bending part between Cap and Ring. We exchanged directly with Manufacturer and replaced the new one. Correspondence has only sent things, there is not one explanation. Rubber's quality seems to have Rose Tsuki. It looks good, but it is a Parts that needs to follow-up.
View detail
One point around Brake
Because we are integrating Parts into Red as a whole
It was this product that I found around Brake.
There are not so many people changing Bleeder Cap too
It became a little Accent.
View detail
★DAYTONA Breeder Rubber Cap Red★
Although OEM Breeder Rubber Cap of the initial installation OEM has become black of Carbon black so as to be strong against ultraviolet rays, deterioration becomes remarkable due to daily ultraviolet rays and various factors, and the fingertip becomes black if touched.
BlackRubber specific degradation.
However, cracks and cracks can not be confirmed, so it may be acceptable to leave the deterioration peculiar to that BlackRubber as it is, but Webike suddenly found this DAYTONA Breeder Rubber Cap Red, so cheap customization I purchased it, I planned to install it. (See photo)
In my Motorcycle, 1 pc back and forth. Because there is Brake Caliper, this DAYTONA Breeder Rubber Cap Red is Quantity : 2pc. I only used Set.
Removing the degraded existing BlackRubber cap can be easily removed by pulling the Ring part after removing Cap from BreederNozzle.
Next, to install this new DAYTONA Breeder Rubber Cap Red, first hook the Ring part to a fixed position in the lower part of the BreederNozzle and pull it, adjust the angle of the Rubber cap to be fitted, then put the Ring part in the groove and complete the Cap.
Originally, this Breeder Rubber Cap was damaged and deformed by Air breeder Nozzle and moisture and dust into Breeder Nozzle - Although it plays a role to prevent the invasion of Garbage such as mud and gravel, if you use it for several years, Black powder is generated due to deterioration also at the contact part of Nozzle and foreign matter into Nozzle (Garbage) It will also allow you to intrude, so if you are interested in, recommend Breeder Rubber Cap to be exchanged at the same frequency as Brake fluid exchange recommended frequency about once every two years.
Since this DAYTONA Breeder Rubber Cap is very inexpensive, it may be ideal for maintenance to replace Breeder Rubber Cap when exchanging Brake fluid.
This DAYTONA Breeder Rubber Cap, in addition to Red, as well as Black, Blue - Lime green - Color : Yellow - There is Orange, based on Black HONDA (Red) - YAMAHA (Blue) - KAWASAKI (Lime green) - SUZUKI(Color : Yellow) - KTM (Orange) Although you can color-code with Motorcycle Manufacturer, it is also fun to enjoy changing colors of Breeder Rubber Cap every time you exchange.
.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
BreederDust cap
As I said in other impres, I'm Oversized when I fit it.
Because it is universal, it is made entirely large.
Cap floats slightly off the ground.
I think that it will not be disengaged while driving, but I thought that it was good to change the image and purchased it.
Because it is a back and forth interlocking system, I tried playing with Red and Blue colors.
The price is expensive.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
It is PetitDress-up (^. ^)
It is just a replacement Parts with no possibility in terms of performance (^_^;)
Since OEMCaliper is Black and Cap is Black, I switched to Red with a feeling of Dress-up attaching Accent.
I think that the number was also good and it was not wasted with 3 pieces. I feel like a little Oversized, but if I run I will be getting tired of the heat of Caliper in a while? The price is high for the product. I wonder if it's a bit cheaper.
View detail
Without this worry of losing
Previously, I had corrupted Breeder in running while losing Cap and had clogged holes. Relieved because it comes with drop prevention Ring. View detail