Reviews
Fits: HONDA CRF250RALLY LD, HONDA CRF250RALLY, HONDA CRF250L LD, HONDA CRF250L, HONDA CRF250M
It's expensive, but it works.
It's expensive but effective.
I no longer get stuck in the mountains.
However, if you don't get it on early, the STAND itself will be deformed, so I think it's best to get it on early.
View detail
Fits: YAMAHA serow250 s, YAMAHA SEROW250
Durability is a problem.
The Horn (Two Extensions) for kicking up the bike is Large and easy to use, but the Two Extensions came off after a year or so. I don't know why, I had it installed at a motorcycle shop, but the bolt is not the same as the material:It seems to be Aluminum. It is unbelievable that they use the aluminum bolt for the part that the stress is applied at every kick-up and kick-down. It is the Level of the old China product. The price is too high. The bottom plate is also Material:I don't think it has to be Aluminum. Because they are Parts that attach to Steel's OEMSide Stand. View detail
The tilt is improved and safe.
The motorcycle side stand in Europe is too short for Japan, so I installed this height bracket.
It is well made and has good mounting accuracy, and I don't have to worry about securing it with the Side Stand.
View detail
Fits: HONDA CRF1100L Africa Twin, HONDA CRF1100L AFRICA TWIN Adventure Sports
Due to the structure, the FootAssist Bar? part comes loose and comes off immediately.
The foot bar part may not have a good weight balance due to its structure, or it may be loosened and dislodged easily by the vibration of driving.
It came loose three times in 2000km, once came off and was warned by a following car. In the end, despite the fact that I warned him to tighten it up with Screw Lock, it came off somewhere and went missing! It is very dangerous if it comes off while driving at high speed, etc. Manufacturer's reply is required.
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Recommended for people with delicate feet.
Purchased for the AdventureSports type. The purpose is to extend the length of STAND. The purpose of increasing the ground clearance is secondary.
My feet are in the Normal position and the sole of my feet touches the ground. 2cm lower in the low position and the heel floats.
I ride the Seat with my feet on the footpeg with the Side Stand on. This is because I'm worried that if I pay the Side Stand before I get on the bike, I'll knock the motorcycle over to the Right Side. In the normal position, there are often places where the terrain leans toward the Left Side or the Left Side of the road is sloping. It was. The legs didn't feel right, and because the center of gravity of the motorcycle is so high, it was difficult to wake it up. I tried to raise the bike by shifting the center of gravity. I bought this product because I can't do it every time. 19mm STAND is longer, so I can wake up without having to do it again. The price is high, but I'm happy with it. The grounding area of other products extends, but I didn't think there were any products that made the STAND length longer.
I'm 5'9" tall. Installation is easy. The picture is the box it came in. If you can help me.
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
It's easy to trigger.
The STAND on the Africa Twin is short and even if the road surface is level, it seems to lean quite a bit. I am worried that the STAND is not coming out until you get used to it. After installing this product, the tilt is looser and easier to cause. The ground is two birds with one stone with the feeling of security in the ground where the ground is loose. However, it is necessary to pay attention to the inclination of the stopping position because the amount that has happened, the fall risk during stopping goes up.
Installation is easy, but I think that it loosens by vibration if Screw Lock is not applied to the fixed Bolt. It is another product, but it came loose and lost the Bolt before.
View detail
Large satisfied with the functionality
There were times when the NORMAL Side Stand was really hard to get out with the ride and I felt like I was going to stumble standing up.
After installing this product, the Side Stand is easy to take out, and the appearance when you park the car is also good for parenthesis. This is the Items that can be easily installed and can be used for recommendation.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200XS, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200V
This is so convenient for my short legs!
XL1200C SPORTSTER 1200 XL883N (2010 year) I installed it in
Sitting down and getting the Side Stand in and out was seriously hard for my brother's short self.
KIJIMA has a similar one, but it's still somewhat lacking. Especially when you put out a STAND, it is slightly short at the end and almost makes me feel like I'm going to lose my footing.
This Extension in one country has a good length to it, which makes it crazy stable and easy to get in and out of.
The texture is good and cool.
It's Original, which is made by Shop, so I suppose it's somewhat of a Cost premium, but the casual convenience of it will eliminate the Stress to AmericanStandard.
View detail
Fits: HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883R
XL883R.
It is installed in '06 DXL883R. But when it tries to install with 2006 type XL883R, the hole diameter is Small size, the processing which makes the hole diameter Large was necessary.
will make it easier to get in and out of STAND.
View detail
It is not bad
I have a Motorcycle in my yard, but the ground is dirt, so it's unstable when it rains.
So I bought this one and installed it in a position to put the Side Stand in.
I think the strength is high for being light. The disadvantage is that it is difficult to find in the dark when it is black, and because it is light, it is sometimes blown away in the strong wind.
Other than that, I have no complaints and I am still using it.
View detail
Hmm
I bought it because of the design. The design is very attractive. I tried to cut it with a sandpaper, but it doesn't fit. The accuracy of processing is not so good. The screw hole is also out of alignment and I can see the screw from the outside. (^^) View detail
It's not exactly Bolt On!
I bought it because I was worried about where to stop it, but the installation requires some work.
While confirming the part that interferes, it shaved and attached with File.
View detail
STAND must be processed.
When you tighten the bolt, it will crack.
This is a product that requires Carbon Plate sharpening. Please be careful.
View detail
Camping touring with full load and expecting to be effective?
I have always felt that the car was leaning too much when stopping at the side stand, so I will be able to use this system in the future Extension to reduce tilt in case of a full load for camping touring installed
I was a little concerned about hanging STAND in places with bad footing and on the shoulder of the road, but as you can see in the photos, I was able to get it to work Balance seems to be a good choice when carrying Large luggage, as it is quite low leaning
It also increases the footprint of the STAND, so it can be used in places where the ground is soft, such as camping grounds You can also expect the STAND to be less likely to be plugged in
As expected of Earls Gear, it has a high quality feel to it
However, there is a part that doesn't fit perfectly with the STAND shape, and the fixed part is slightly floating There is
It seems to be perfectly fine for use, so I'm using it as is
Also, because of the reduced leaning, you have to raise the body of the car more than usual when applying STAND This should be considered a TradeOff
The price is quite high, so I was quite hesitant to buy it, but overall I am very satisfied with the product
View detail
Good design and functionality
When I purchased this product, I bought it on an applicable car and I could not install it well It fit the STANDBracket of the Motorcycle perfectly, but the Bolt is in the back I was only able to stop two of them The first one hit a STANDfootpeg weld and the top cap of the Bracket I purchased The part, per bolt was shaved After completion, it is stopped by two bolts on the back side of two bolts I am worried while running
After installation, the leaning of the Motorcycle has been eliminated
View detail
Cost performance?
I think the original Stand End part is also quite wide, but I bought it for more stability I did
As a manufacturer in Taiwan, I was a little anxious, but it was not that complicated It's not Parts, so I was able to put it on quickly and easily
It is important to note that the body is aluminum and the attached Bolt is also It's aluminum, so if you tighten it too much, it will break in a flash
The red color is also a nice touch
But is it still too expensive? I think so
View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Safe FOR JAPAN MODEL products
It was annoying to cause a large leaning, large body, but Side The Stand is longer and easier to use The Stand is longer and easier to use It's just a good fit with no discomfort at all It's a bit pricey, but it's Earls Gear, so I have to give it this rating View detail
enough
This kind of material is indispensable for parking in unpaved area I carry it in my Tank Bag when I go for a long ride LargeIt's not too tight, but it's strong enough
We have not yet been able to evaluate the durability of this product over time because it has only been used for a few months If I do, I'll post again then
View detail
Good in cost, good in design, poor in function
Cost and design are good, but when you try to install it, you'll see that the tip of the STAND is It got stuck and the tip bolt of the Stand End could not be attached As a result, it is fixed hard with two rear bolts It is running in the state of worrying that it will fall off at any moment
View detail
Fashion starts at your feet
It was even better than I imagined it would be, and the thickness of the aluminum was very solid It was built with such a high quality feel that the weight and STAND bounce was sweet Now I just hope the body won't fall over in high winds and muddy conditions View detail