Reviews
Fits: HONDA CB1100, HONDA FORZA Si, HONDA FORZA Z, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MT-07, YAMAHA XVS1300A, YAMAHA YZF-R1, SUZUKI DL1000 V-STROM1000, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198R, DUCATI 1198S, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1981 1098R, DUCATI 669 MONSTER S2 S4R, DUCATI 669 MONSTER S2 S4RS
It can not be used for Duke 125.
The outer shape was thick, and it did not reach Plug.
Manufacturer also wanted to check not only the plug size but also the plug hole of the real car.
Everyone, please take care.
View detail
Truly KTC
Previously I bought Plug wrench of the same Size of Manufacturer,
Purchased KTC as it got broken with several uses.
Naturally, it can be used without breaking.
Again I realized that the tools should use the familiar Manufacturer.
View detail
It is a relatively easy-to-use product!
I think that there is no loss by having one for Plug replacement.
Because of the relationship of the motorcycle on which we ride, we often replace Jet class, so we need to check burning color of Jet, so we use it a lot, but we have no complaints, think about Cost performance and various Even it is a convincing product.
View detail
Easy to use!
NSR250R (MC21) It is a very useful item for Rear bank's plug exchange.
Removing the Right Side 's Reserve tank, it is narrow, but you can swap it by holding hands from the gap.
It was a bit of time to take off the Fuel Tank outdoors as it became dark especially at the time of Touring..
It is very useful when it is called.
View detail
For ZrXSeries Plug exchange.
I used it for Plug exchange of ZrX 1200 daeg.
Length was just right and I was able to do work comfortably.
The Socket section is also solidly attached with prevention of dropping of the plug.
View detail
Purchase Repeat
I used it for ZrX 1200R reverse car Plug exchange. Before that, when I switched Plug of FORZAMF 08, I was impressed with its ease of use using this plug wrench.
If the Plug diameter is the same, you did not have to order, but because it is different (FORZAMF 08 is 18 mm and ZrX 1200 R is 16 mm) It's up to you to place an order.
When impressing work, when Plug No. 3 was exchanged Frame and Wire cableWiring fighting, it was made me realize that I could buy it without working with this Socket and Extension bar 300 mm and above and Ratchet wrench without it. Torque management in Torque wrench is also good. Socket Insertion diameter is 9. 5mm is.
Since it is no doubt to use it, when using Plug, why do not you try using it.
View detail
It was the best
I used it for Plug change of FORZAMF 08. Plug size is 18 mm. It was a work from Cowl's Small window, so it seemed to be difficult to maintain very, but it was easy to finish using this plug wrench.
Magnets are contained in this product Plug socket and stick to the Plug Sticking to some extent Does not fall by some things Even if you wield it Large Durable and easy to work at the place where work is difficult Body making is also firm and durable That's it.
Extension bar It is easy to use if there is something more than 200 mm, so we recommend purchasing together.
Feeling used When removing Plug There may be times when it is hard and there is no power in T-shaped plug wrench, but Socket 3 / 8 Inch Ratchet wrench and LongWrench can also be used Smooth to fasten Torque wrench also Torque management can be managed Many tremendous gems impressed after a long time ZrX1200R another 16 ZrX1200R also ordered 16 mm KTCPlug wrench at the time of Plug replacement It depends..
Plug is a necessity at replacement Price is also affordable KTC 9. 5-sq. Plug Wrench.
View detail
I am satisfied with the texture well
13 millimeter Meter's Plug wrench chose KTC because it is not much marketed Size.
It is a product which complains including plating texture etc..
View detail
The Socket department is universal.
At first I used the Standard Type Plug wrench, but because the Handlebar part was short and hit the Motorcycle Handlebar, it was very hard to use, so I came to find this for the long Type of Handlebar part. In this case, the T type part comes out above the Handlebar of Motorcycle, so we could turn the plug.
View detail
I think that it is easy to use
This item moves the Socket part very flexibly. Moreover, since I can remove Plug socket and use it with Torque wrench etc, I think that it is convenient to use. View detail
For in-vehicle tools...
"Not like KTC" Although it is built, I thought that the L-Type bar is good and I bought it. It is somewhat better than the plug wrench included in the common automatic for Vehicle in-vehicle tool. Since the L - Type bar is also long, I think that it is easy to turn a tightly closed Plug. View detail
Because it is uneasy in the on-board tool
Large hand Manufacturer I thought it would have been good to buy a tool, but since it is not like a person who will change Plug in a couple of months, it will not be a problem if it is not a tool Manufacturer but a Large hand Manufacturer, Purchase and purchase.
It is very easy to use. Because it is a clownfish.
I also tried it on a car test, but it is no use after all. Do not do that. There are things that are unusual to use - - -.
Also, as the thing itself is so long, I wonder if it can be a kind of car that needs to be screwed down as it is - - -.
View detail
For KX85II Plug exchange
The Plug socket Wrench that comes with the KX85 II has no gap and can not be used when the Radiator guard is attached. So I purchased the Spanner formula Wrench. You can use not only Spanner but also Glasses.
It is a very easy-to-use tool with a texture similar to KTC product.
View detail
KTC 9.5sq. Plug Wrench
It is mandatory Items for Testastretta Engine.
Without this it will not enter in other Wrench.
KTC, it's not too expensive, so if you have it there is no loss.
View detail
This is not it - - -
Because I bought Mitsubishi's light in second-hand use, if I thought about changing Plug, the Plug wrench that I used until now can not enter!
When examining it, it turns out that Mitsubishi's light 4ValveEngine is not a thin type of Wrench !!
Since there was no choice, as it searched, it was that there was inventory on Wa Big, so I ordered it immediately, and it arrived the next day.
Of course, it was saved by making Small Plug replacement for light.
From now on, I will use this Plug wrench for the Main and Maintenance of cars and Motorcycle.
View detail
Easy to use
It was difficult to remove the plug of MT 09, but it was easy to remove it with this plug wrench. The price is affordable and satisfied. It seems to be an exclusive tool for MT. View detail
Flexible plug wrench
I was in trouble because I could not remove the inside plug of 4 cylinder.
With this tool you can easily remove it without scratching the Frame.
I wish I had bought it sooner.
View detail
I was able to work with one hand - - -.
It was smooth until I removed the plug, but after removing it, Magnet also got out and just turned into a plug wrench.
Magnet is strong, and once it goes out, it is a treasure trouble to return it to its original place.
However, there may be individual differences, so if Magnet does not come off it can somehow work with one hand so good.
View detail
It is made with the magnet on the inside and the Plug does not fall off
Used with Sooner 100.
Because the Plug is behind the scenes, it was Large strange to remove in the Type Plug wrench that inserts a stick from the side.
This Wrench has a magnet on the inside, making it not to drop the plug, and it was easy to remove the plug from Body.
(When clamping, the handle was T-shaped, so the angle was clearly understandable feeling)
Since you can also remove the Socket section, it seems that you can use it even with other Size's Socket.
I think that I was glad I bought it.
View detail
Ideal for Testastretta Engine
Used for Plug exchange of Ducati 998. The Testastretta type Engine has a narrow plug hole, and if you use OEMChampion, you can handle it with an on-board tool, but if you try to change to a non-OEM plug such as NGK, you will need an external plug wrench.
This Wrench is a thin type, it enters into the narrow plug hole of Testastretta Engine without difficulty, and the Plug also holds firmly with a magnet, so you can exchange Plug very securely.
If you are lost in Plug wrench, I will recommend this. Especially the Tester type Engine!
View detail