Reviews
Plug replacement essentials!
A 16mm Plug wrench that is often used.
I lost my old one for using it often and considered buying it.
I chose this one because Webig had it in stock and it was made by DAYTONA, a reliable manufacturer.
The price is much cheaper than the tool manufacturer's products, and the comfort is not bad, so I have no complaints and give it a 5!
That's good enough for me Level's DIYMechanic!
View detail
Trusted KTC
I used it to change from NORMAL Iridium plugs to NGK DXPlug on CB250R. The tool of KTC is reliable. The price is a little high, but I bought this slim product because I don't want it to fit in the narrow plug hole. The performance was as expected without any sticking. I used TONE's Extension bar and Ratchet, and finally tightened it with SK-11's Digital torque wrench. The built-in magnet is also strong, and I was able to exchange the Plug without dropping it. View detail
Easy to use for beginners
It is the first time to use the Plug wrench other than the in-vehicle tool, so I don't know if I can impresse it correctly, but I was able to use it as I thought.
Along with Plug exchange it becomes necessary to purchase Plug wrench which is different in Size from until now, at first it stops before it bites to Nut of Plug, and it thought that it was that, but Plug wrench is the structure which grasps the part of the Socket side of Plug with Rubber or something in order to hold Plug. I did not know even that. (Sweat) At any rate, I only know about in-car tools…
I was impressed that it was well made, unlike the simple tools in the car. It may be natural, but...
View detail
Flexible and easy to use.
This is a flexible type of plug wrench suitable for replacing the motorcycle's plug, and the angle of the wrench can be changed freely and effectively because the cylinder head area of the motorcycle is crowded with wiring cords, wires and hose. It is. View detail
Essential Items for WR250F
This tool that can access the plug of WR250F from an angle is active because the plug of WR250F is right under the main frame.
You need a little hang to turn it, but if you get used to it, you can remove and tighten it all with this one.
Be careful when doing so, as the tool may hit the Radiator.
View detail
Anyway, it's easy to use.
I bought it for a HusabergTE125 Plugfor Replacement.
It's very easy to use because it's easy to turn in tight spots and apply moderate force. It's not too long, so it's hard to damage the Screw hole of the plug by overtorque. It is also a point that there are
View detail
Affordable!
I used it for ZOOMER's Plug replacement ^^^.
The moped system is in the back and it was hard to get to it. I'm glad I got it right ^^.
I thought it would be a good idea to have one ^ ^
View detail
Fits: HONDA CB1100, HONDA FORZA Si, HONDA FORZA Z, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MT-07, YAMAHA XVS1300A, YAMAHA YZF-R1, SUZUKI DL1000 V-STROM1000, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198R, DUCATI 1198S, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1981 1098R, DUCATI 669 MONSTER S2 S4R, DUCATI 669 MONSTER S2 S4RS
Essential Items for Plug Exchange
I bought it with the Plug during the Plug replacement period
It looks like just a docket, but there is a Material:It has a Rubber ring to help prevent the plug from falling out But sometimes Material:Since the rubber ring part may fall out, you might want to check it every time Not As a result, I am satisfied with the improvement in maintenance efficiency
View detail
Necessary and inexpensive
CROSSCUB110 (JA45) It is used for the Spark plug replacement of the
Nothing noteworthy, but I like that it's cheap
This and the Ratchet Handlebar are all you need for your tools
Torque wrench is even better if you have a Torque wrench, but the angle of the tightening on the official website of Plug You should be fine if you check the
Even a zubby amateur (like me) can replace it
View detail
Weak plug retention
I bought it for NGK's DP8EA-9, but I have no idea if it holds a Plug or not I don't know
I actually fell off the polo once and cringed
I haven't checked to see how it works with other Plug
View detail
To replace the plug in TW200
Purchased because there was no size that fit the Plug wrench in my hand
The work is done with a stable KTCBrand with no problems in use
With Sunday mechanic, if you buy 1 pc, it's something you can use for the rest of your life
View detail
50cc Plugfor Replacement
Because there was no plug wrench for 16mm, I bought it It is not possible to remove the plug with the handy socket wrench, so I bought it because there is no plug wrench for 16mm I had to remove it, but it's made by KTC, so I'm using it It's very easy to use View detail
KTC for peace of mind
I prefer to use KTC tools
The magnet grips the plug tightly, so you can use it as a
Plug replacement can be done with peace of mind
The Magnet is not too strong and not too weak, so it's easy to use
It's not something I use often, but that's why I want to use a good one
View detail
Good and inexpensive Plug wrench
I'm a mechanic and only use it occasionally, but it's something I need to have, so I bought it
I am very happy with the quality of the product, which is cheaper than at home centers and auto parts stores
I would also buy another Size
View detail
Convenient with with Magnet
With Magnet, it is convenient when loosening, when installing. Especially when installing, you can install without giving Damage to Plug.
Can be relieved with KTC made of high quality.
View detail
Fits: HONDA CB1100, HONDA FORZA Si, HONDA FORZA Z, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MT-07, YAMAHA XVS1300A, YAMAHA YZF-R1, SUZUKI DL1000 V-STROM1000, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198R, DUCATI 1198S, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1981 1098R, DUCATI 669 MONSTER S2 S4R, DUCATI 669 MONSTER S2 S4RS
Be firm
Purchased to Plugfor Replacement of BMW R1200GS. As I checked the plug hole in advance, it was quite deep, and it was previously Socket for 16 mm (To KLX 250) I was satisfied with the texture when I bought it, so I bought it this time. I have not exchanged the Plug yet, but I think that it is slim so that it can be used enough for use. View detail
You can use it even if the space around the plug is narrow.
? 【What made you decide the purchase?】
Even if the space around the plug is narrow, it is structured to fit in the plug.
? 【How was it actually used?】
As expected, Wrench caught tightly in the plug.
? 【Was it difficult to install? (Hard parts case)】
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
? [Is there anything I was disappointed about?]
Nothing in particular.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I think that it is more likely to be plugged even in a place where the overall thickness is a little thinner.
? 【Have you compared items?】
DRCRatchetBragWrench
? [Others]
I'm happy if the price is a bit cheaper.
View detail
Firm making. It is truly KTC
It is essential Items for Plug exchange of NC 30. Because it fixes the plug with magnetic force, it is useful for situations where maintenance is bad like V type Engine. Also, because of the 9 and 5 sockets, it was easy to install on the Torque wrench on hand when tightening. The texture is also satisfactory. View detail
The thing itself is not bad
CBR600RR I bought it with the plug-in replacement of 2013, but since the thicker one of the plug wrench is bigger than the hole of the plug and it does not reach the plug, I could not use it after all. View detail
Not suitable for Scooter
Buy for tzr50r Plug replacement. Bring it to the vertical engine, but it is somewhat unkind to Soroter's Horizontal Type. I think that it is necessary for ns-1 or nsr 50. View detail