Reviews
Necessities
[How is it used?
I compete in Enduro races with my RM250, and since it is a 2-stroke, I often have to change plugs, and I have been using this plug wrench for a long time.
I lost it during a Race the other day and had to buy it again. My Machine does not have good access to Plug, so I have to choose this Wrench.
Was the one you received as per Image?
As per Image. And I used to use it.
How was your experience with it?
The length is still exquisite. It is possible to reach the Plug by passing through the Glasses. The Glasses part is notched so that it can be inserted through the plug's guyliner.
[Points to note]
How did it compare to other products?
I think there was a good one from HondaOEM Parts, but I heard through the wind that it has been discontinued.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Good texture and easy to use
The price is reasonable, but the texture is good and easy to use.
I used it to replace a plug in a CUB and it is easy to use with no problems whatsoever.
It fits well in my hand and is easy to use, so it's a Recommendation!
View detail
Only OEM parts fit Honda vehicles!
The thing is nice, but only the OEM PlugRatchet fits Honda Motorcycles! View detail
Plug replacement for SCUB
When replacing the plug of a SUCUB, I purchased Emon's plug wrench (16mm) because the plug replacement is too large to be done with an in-vehicle tool. The plug position of the SCUB is narrow and the plug is deep into the car, so it is difficult to work on the plug. The plug was replaced with a Standard Plug BP5HA NGK (CR7EK 7546). View detail
It doesn't work …
It said that the Plug would not fall off with Magnet, but the magnetic force was too weak and it did not stick at all, and the rubber inside was too weak to hold the Flag at all. View detail
HrankDrive at this price!
The price is unbeatable for a full-rankDrive Socket.
It is also convenient to use both Wrench and SocketHand.
View detail
Only Exclusive Products
The one I purchased was a DPlug exclusive.
It's a good fit, and it's a good fit.
It is an excellent product that is also easy to apply force.
View detail
What's the use?
The DT50 has a Spark plug hex on the Cylinder head, so it was easy to remove with a MONKEY Wrench.
But with the 4st Engine, it is in the bottom of a deep hole, so the choice is to use Deep socket or a product like this.
It is a standard product that has been around for a long time, but it is still a longtime seller and is easy to use.
View detail
Fits: HONDA CB1100, HONDA FORZA Si, HONDA FORZA Z, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MT-07, YAMAHA XVS1300A, YAMAHA YZF-R1, SUZUKI DL1000 V-STROM1000, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198R, DUCATI 1198S, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1981 1098R, DUCATI 669 MONSTER S2 S4R, DUCATI 669 MONSTER S2 S4RS
Used in Z400 Plug replacement
[How is it used?
As the Title says, Z400 (22 years old) Used in plug replacement of
This is the first time that a Rubber type with dropout protection has been used.
Was the one you received as per Image?
As per Image.
The solid construction of the product does not break easily, and I felt that it has the robustness to be used many times.
The plating is well finished and is not likely to rust.
How was your experience with it?
The Z400 plug was reached without any problem, and the bolt head of the screw could be loosened and tightened without licking.
However, as for the function to prevent the Plug from falling out, it may be a problem with the shape of the Plug, but it keeps falling out no matter how many times I try, so I am a little disappointed in this respect.
Radio pliers can be used to remove and install the plug from the plug hole, which increases man-hours slightly, but the work itself is possible.
[Points to note]
None in particular
How did it compare to other products?
I think the Magnet type of dropout protection is definitely the way to go.
All of the other Size plug wrench sockets that I own are Magnet-type, but they have never fallen out.
[ITEMS TO BUY TOGETHER
Trak Wrench
When tightening a long reach plug, it is not certain that it can be done well if it is tightened at an angle, so it is better to use Torque to control the tightening.
Socket Extension Adapter
Plug is unreachable by Socket alone without an extension Adapter.
Pivoting ExtensionAdapter
It would be easier to work with if there were
Breaker bar
Ratchet
View detail
Buy it.
I bought it because it was inexpensive, but I had to do some additional work because I could not use it on my KTM250SX-F. View detail
Please never buy it. Because something does not suit the air zipper 22.
Please never buy it.
Because something does not suit the air zipper 22.
View detail
CRF250RALLY Plug replacement
17"CRF250RALLY has reached 13,000 km distance after 5 years, so I replaced the plug.
DOHCHead has a long distance to the seat of the plug, so we attached an extension bar of about 5 cm to the plug wrench.
The Left SideCowl was removed, and although the work was done in a tight space, the Socket allowed the Plug to be removed without falling off.
View detail
Since it is just going to concern with an engine, it is as a thing of there there.
Since it is just going to concern with an engine, it is as a thing of there there. View detail
NGK.DENSOPlug either is acceptable
There is another Plug wrench, but the size did not fit, so I bought the size that fits.
KTC is safe and secure, and there are no problems with its use.
It is almost never replaced, so it will last a lifetime.
View detail
Easy to use
Flexible type for Motorcycle Plug replacement is easy to access even if there is an obstacle.
It is very useful around the Cylinder head because Wiring and other obstacles are in the way.
The angle of the wrench can be freely changed to accommodate almost any situation.
View detail
Convenient
A plug wrench would be useful.
It holds the Plug securely, making it easy to attach and detach.
I think it is a high quality and cost-effective product.
View detail
Convenient to have
A regular Socket won't grab a Plug.
This item will Hold.
The price is cheap and very cost-effective, and the quality is not bad.
View detail
Necessities
The solid construction and quality of the product make it safe to replace Spark plugs.
The plug is held in place with a magnet, making it easy to replace the plug in a deep location.
View detail
Fits: HONDA CB1100, HONDA FORZA Si, HONDA FORZA Z, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MT-07, YAMAHA XVS1300A, YAMAHA YZF-R1, SUZUKI DL1000 V-STROM1000, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198R, DUCATI 1198S, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1981 1098R, DUCATI 669 MONSTER S2 S4R, DUCATI 669 MONSTER S2 S4RS
I can use it to maintain the Plug in the back!
I use this product for plug maintenance in the back of the house because it is a long and narrow plug wrench socket. View detail
A parallel two-cylinder 2Cycle can reach it!
I purchased this product to use for R1-Z.
So far, I have not had to replace the plugs on the road, but I have a set of plugs and this Wrench tucked under the Seat.
Please note that if you have a parallel TWIN 2Cycle, it has a shape that can be used donpically, but if you have a 4Cycle or other Plug in a secluded location, it is almost impossible to use it.
In this case, we recommend a SocketType Plug wrench with Rubber inside to keep it from falling off.
This Wrench has a notch that allows the Plug Cable to be inserted even in tight spaces.
It is convenient to have one because it is not hexagonal and can be tightened little by little.
View detail