Reviews
This is a mounting bracket for the same manufacturer's Smartphone case.
[How is it used?
I purchased a Smartphone case named "Adventure Large Land" from LEAD Industries and attached it to my Motorcycle with a Mount bar. Come on, let's install it!" And when I took it out of the box, I found only the Smartphone CaseSingle Body and no Bracket for installation!
Read the description on the back of the Package. Please purchase the bracket of your choice separately. I bought this product again because it seemed to be convenient for my own use in the product introduction section of Webike.
Was the one you received as per Image?
It looks exactly like the image shown in Webike's product introduction section.
It has a clamp that can be easily fixed to a handlebar or mantlebar, and an articulated mechanism that allows it to be moved to any angle, with a height of about 6 cm from the clamp.
Most of the parts are plastic, but the product seemed to have some strength and was exactly as shown in the Image.
Was the installation difficult?
Fix the Clamp to the Handlebar, Mount Bar, etc. at the desired location (where it will not interfere with driving) (be careful not to over-tighten the screws), attach a Smartphone Case, etc. that is compatible with this product, adjust the angle to your liking, and fix it in place. It is a simple and easy process.
How was your experience with it?
It is very easy to use because it is highly universal and has a wide range of movement at the top, as it can be mounted in most Large Pipe-shaped places of around 22mm.
Since the material of each part is plastic, the torques should be carefully managed when tightening.
[Included Parts:were they on?
BracketBody for installation and a simple Instruction Manual/Spec.
[Was there anything that disappointed you?
None
LEAD Industries. Adventure Large Land. There are several other types of brackets available, so please select and purchase the one that best suits your purpose of use.
Other items that would be helpful
Point and hang of installation
As noted above, fix with proper tightening Torque.
Plastic, especially in winter, can be cracked unexpectedly easily if it is over-tightened.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available. First-time installers should read it carefully before proceeding.
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
If you purchase the Smartphone Case etc. that you want to install together, you can work smoothly and without time loss.
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
Automatic Navigation display if you have a smartphone!
I bought it because I Mounted my phone and often heard that it was broken by vibration.
The maps are easy to read with Apple car play. The LCD screen is bright and super clean. It is easy to connect as long as you have your phone with you, without having to operate it every time.
DisplayBody is easy to see if it is large enough, but not too large, so this is just right.
It is easy to install for cars with side cowl.
The Camera has a good reflection, but it is a bit on the large side.
Even in this short period of time, they seem to be updating the system frequently. Since it is quite expensive, I would appreciate it if System becomes easier to use and can be used for a longer period of time.
View detail
Convenient
The operation is more convenient than on my phone and the Google map display is good, so I am satisfied with it.
The blind spot detection is very responsive, so it frequently detects them on the highway as well as in town driving, but it's good for alerting people.
The concern is that the threshold of the air pressure sensor is the same for front and rear, so care must be taken if the air pressure differs between front and rear models.
View detail
CaseSingle Body products and mounting brackets are sold separately.
[How is it used?
I am a middle-aged motorcycle rider who has just now started installing Mount bars on my motorcycle.
I was looking for a USB Power Socket and Smartphone Holder for the Mount bar, and I found a lot of information in Webike's product introduction section.
A friend of mine who was using a Smartphone Holder with an exposed type of phone lost his phone while playing in the mountains (luckily, he was able to find and retrieve it afterwards), so I was looking for a waterproof case type because I was worried about the exposed type. I was looking for a waterproof case type. Adventure Large Land. I found a product called "The best of the best," and coupled with the low price, I bought it.
Was the one you received as per Image?
Was it because I was new to Smartphone Case? Is it because I bought it without reading the product introduction section carefully? The product I received was Smartphone Case I was surprised to see that it was a Single Body product, and when I reviewed Webike's product introduction section........................... Mounting Bracket sold separately. It was stated that
I have no problem with the product due to my lack of confirmation as the purchaser (I purchased the bracket for installation at a later date), and I can confirm the waterproof function even when driving in the rain during touring. Smartphone Case I thought that the reliability of the product as a type of product was fully met.
Was the installation difficult?
Optional Base for mounting to the Mounting Bar, align the back side of the product Body with the claw of the Mounting Base and lock it in place, and you are done.
If you are worried about risk of falling, you may feel a little safer if you fasten a Nylon Spring style Key Holder sold at 100-yen Shopetc. on the zipper and body side.
How was your experience with it?
The response of TouchSensor becomes slow even if you are wearing Gloves for smartphone Touch due to the convenience of putting it in a Case (there is no problem when you take off the Gloves and operate it with your bare hands), and if you tend to be irritated by this part, you might want to purchase a Holder of the type that is fixed bare. If you tend to be annoyed by this part, it may be better to purchase a Holder of the type that is fixed bare.
[Included Parts:were they on?
Smartphone CaseBody only.
After considering various usage conditions, the Bracket for installation is sold separately. Please purchase additional items to suit your needs." Is it something like that?
[Was there anything that disappointed you?
Not particularly
When opening the package after purchase. There's no Bracket in the box! I was surprised, but when I confirmed that the company sells several types of brackets for installation and that the individual prices are reasonable, I understood that the concept is as described above.
Other items that would be helpful
Point and hang of installation
Not particularly
The connection part of the mounting bracket is plastic, so be careful to attach and detach it carefully.
[Availability and clarity of the Instruction Manual
I think there is an Instruction Manual on the back of the package....
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
First of all, it is sold separately. Mount Bracket for mounting Without this. Just a Compact Smartphone Case" The result will be a
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
Lightweight Compact
I had been using an ordinary ram-mounted Arm, but when I transplanted it to the FairingBracket from its previous mount on the Handlebar, the length of the Arm became an obstacle to handling, and because it was heavy, the angle of the Arm sometimes changed due to vibration or shock. The length of the Arm was an obstacle to its handling.
That is why we changed to a short arm. The short arm is lighter than the short arm, and it also reduces the load on the base.
View detail
good
This is a very satisfying product. Kijima is a brand you can trust and purchase. I have several Kijima parts on my motorcycle, but this is my favorite. Thanks to the seller.. View detail
Handlebar for high Smartphone Holder with Simple
I am installing it on Mirror to mount a PeakDesign Motorcycle mount bar. So far, it has been installed with no problems at all. View detail
It was a little long for me.
[How is it used?
After six months of hanghang and Restore&Custom work on the LITTLE CUB, I thought I'd get comfortable with the next stage of the project. First, we need an external power source. I started looking for a USB power supply, but realized that there was no place to install them, so I looked for a Mount Bar in Webike's product introduction section and bought a Multi Bar from Made by HURRICANE, which had a safe design.
How did you like it?
Although I knew it existed until now Messy around the Handlebar. The Mount bar had never been used before because I had the impression that it was too heavy.
The fact that I had a safe length and design for my first Mount bar purchase and I was a teenager. Separate handle (Handlebar of Separate type)". Speaking of Other Brand Products of "HURRICANE It was an Image that I was not surprised to see. Finally, I too will buy HURRICANE products." I bought the Multi Bar at Tension...but the bar was a little too long for my use.
Please don't get me wrong, the product itself was a good product with good rigidity, but for my personal use, I would have preferred a shorter length, so after much thought, I replaced it with a Mount bar made by another company.
We wanted to use a Short Type Mount Bar to make it as Refreshing as possible, since we only need to be able to fix the USB power supply and Smartphone Holder.
How did it compare to other products?
If it is a MAJOR Manufacturer's product. "A damned glitchy piece of junk." I don't think there are any.
Before you buy Which car? of Which part? and there you want to install it in What do you want to install?" I think that Risk can be reduced if you take into account the following before making a purchase.
[Points to note]
This product is a type that is attached to the Mirror Holder by fastening it to the Mirror Holder, so it is easy to set the quantity to a position that is easy to use.:Once set, please tighten and secure each part firmly, otherwise you will be in a hurry if it loosens while driving... (This is a testimonial.)
Other items that would be helpful
The deciding factor in the purchase
As I mentioned above, I didn't even understand the difference between the Mount bar and I didn't think it through. HURRICANE Products I bought this product only because it was a very solid product with no fault of this product over and over again.
【Included Parts:presence or absence】.
Bracket for connecting Mount Bar Body and Mirror Holder, 2 Washers and Spring washerQuantity:1pc. and Nut included.
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you purchase the products you want to install at the same time, such as a power supply outlet, Smartphone Holder, Drink Holder, Camera Mounting Holders, etc., you can proceed with the work at a stretch.
Opinions and requests to Manufacturer.
It resonates with my father's generation. "HURRICANE BrandName, we look forward to continuing to serve you with a variety of custom parts at affordable prices.
View detail
wonderful (e.g. of a meal)
I have not used it on a rainy day, so I don't know how it works, but it is easy to see the Camera before and after. View detail
Robust retention and mysterious unity
[How is it used?
Quantity of about 8 years and 80,000 km (YZF-R25, 10,000 km in half a year, the rest YZF-R6):2pc. Use Set
Installation:All of them are installed by building a base on the handlebar, R25 with Nisshin Mirror Holder, R6 with CF POSH Mirror Holder (https://www.webike.net/sd/1125900/) and YAMAHAOEM Parts (https://www.webike.net/sd/1125900/) with M10Ball (https://www.webike.net/sd/1125900/) and Short arm (https://www.webike.net/sd/1125900/). R6 is equipped with CF POSH Mirror Holder (https://www.webike.net/sd/21313052/) and YAMAHAOEM Parts (https://www.webike.net/sd/25729937/) with M10Ball (https://www.webike.net/sd/24021956/) and short arm (https://www.webike.net/sd/21313052/). Short arm ()
Equipment used
Xperia 5 I don't even remember because I have no records before and I wasn't really interested in smartphones.
1. Xperia 5 (docomo) approx. 2 years
2. Galaxy S21 (docomo) about 1 year
2-1.DriveMan BS-8 (https://www.webike.net/sd/23219567/) parallel operation
3. Xperia 5 iii (simFree) about 1 year
4. Pixel 7 Pro (simFree) approx. 1 year
Was the one you received as per Image?
Simple look and somewhat rough information as per Image
Was the installation difficult?
Once the ball of the base is fixed, Arm components can be tightened and loosened without the need for tools, making them easy to use.
However, the Handlebar is used with the smartphone attached to the Quantity:Pair (for Left and Right) It is necessary to check the interference with the Screen, etc. by cutting the screen in half, so it is necessary to check after attaching it.
How was your experience with it?
Even after fixing, some Quantity:Pair (for Left and Right) There is some play in the rotation of the wheel, but it did not rotate while running and did not cause any problems in use.
Although it is not known whether the Smartphone and Camera we used have optical image stabilization, we have never experienced any problems with the Camera.
I have never had a phone fall off without the rubber claws, though. It is just meant to be a precaution.
The rubber part alone can be replaced, and the color can be selected from three colors (https://www.webike.net/sd/24186773/), so the expense is modest when deterioration is somehow a concern. Adhesive also included.
Since it is clamped by four claws, it is necessary to pay attention to the position of the Button (dedicated to Camera of Xperia or Action of iPhone 15Pro) if it is located on the edge of the Smartphone. (I mean, even the Pixel7Pro with two buttons on the Right Side sometimes pressed them.
The size of the gold part of the OEM mounting base of the Driveman BS-8 (also 10) and the gold part of the center seal of this product when the seal is peeled off are brilliantly the same, and when the gold part is disassembled with appropriate double-sided tape and transplanted and attached, it becomes a much sturdier and more robust mounting base than the BS-8's optional Handlebar Mounting. The Mount base is much sturdier and more robust than the BS-8's optional Handlebar Mounting. (It is also possible to clamp it with a nail to further increase stability.
I think I gave up on Seal because its texture is similar to that of YAMAHA's tuning fork Sticker, and it looks similar but slightly different in Largeness.
[Included Parts:were they on?
No Instruction Manual or any other instruction manuals are included in the product images.
[Was there anything that disappointed you?
Nothing special. However, I would have been sad and run to SYGN HOUSE if I didn't know that it was made in the United States and used by the military, but that it was not so particular about the appearance of the product.
Originally, we had used a holder composed only of resin from Miknowla, but the time and effort required to attach and detach the Smartphone was far less. Also, the claim that it is also used by the military made me feel more secure on my motorbike, which has a lot of vibration.
I have never encountered any image stabilization problems, and would have continued to use this product if there were not more Buttons on the Smartphone side.
View detail
Thin and just the right Large size Display
Large is good, and the screen is bright and easy to read.
Synchronizing with a smartphone is also easy.
It was an installation, removal of the drareco.
And installation of AIO-5 Lite.
Wiring was not too long and easy.
I had a hard time connecting to Wi-Fi.
Wi-Fi 2.4G band from Body is poorly connected when affected by other devices.
I think this is because of my environment.
Durability is not yet known,
View detail
The installation was Large strange, but I am satisfied.
Because of ADV160, it takes time to detach Cowl and handle Wiring.
It took almost a day, but the images are beautiful.
The Bluetooth connection was also not bad.
If possible, we hope that it will not have to be used to verify the accident.
View detail
This is the MODEL for Motorcycle without load carrying capacity!
Mounted on ZX-10R.
Litter SS and recent Motorcycle are not loadable under Seat anyway.
The body of this model is smaller than the previous model, and it is a recommendation for Motorcycle.
Especially if ETC is installed, Exactly in 10R where there is really only a tiny gap. [Commendation also in R1].
I have been using Mistuba's DRA RECORDER for about 3 years with the previous MODEL and have not had any malfunctions.
Since a driver's camera is necessary in case of emergency, we really recommend JAPAN, which has a track record of reliability and performance, rather than inexpensive products such as those made in China.
When an accident occurs and the driver's recordings are verified. It was broken. If the "A" is not attached, there is no meaning to it at all.
In addition, if there are many malfunctions, they will need to be replaced or repaired each time, but in recent years, the labor cost for installing a driver's record is quite high at any motorcycle shop.
Therefore, although the product itself is expensive, it is safe and secure with a low failure rate and solid functions.
The only bad part is that you set it up with an app, but the connection to that app is not Smooth lol.
View detail
If there is no reason, this" is" good.
[How is it used?
About 7 years and 70,000 km
XGrip for Smartphone to attach Smartphone and DVR
Mounting points are around the handlebar
Was the one you received as per Image?
Simple package, somewhat rough product as per Image. I would like to say that it is heavy, but it is heavier than I had imagined from the fact that I had heard that it was made of aluminum and from the appearance of its small size.
Was the installation difficult?
The OEM Knob is simply loosened, inserted, and tightened.
If theft is a concern, SecurityKnob is available, but it is a bit bulky.
It is possible to use an Inch size nut to secure the Merit, which can be loosened and angled without the need for tools (use the nut for installation. (Use the Nut for installation, but do not over-tighten it.)
How was your experience with it?
Compared to the standard arm (https://www.webike.net/sd/21313050/) and long arm (https://www.webike.net/sd/21313048/), there is no Spring inside, but it has not come loose or come off.
Since it is the shortest Arm, I thought it would be the least likely to cause a sense of mess when attached around the Handlebar. The support length is also shorter, so it is somewhat safer.
The short length of the cable makes it less flexible. However, the position of Charger was originally taken into consideration, so there is no particular impact.
The lightest Arm components except for those with different materials
[Included Parts:were they on?
No particular product only.
[Was there anything that disappointed you?
Nothing special. If I had to say, it would be nice if Bolt wasmm Size, but there is no problem if you don't change it from the original parts.
Quantity:If you want to buy this product, you need to purchase it from RoseRose because the Set comes with a standard arm, but unless you need a standard or long arm for height or position reasons, I feel that this product is the one to choose if you are looking for lightness.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI GSX1300 R Hayabusa, SUZUKI GSX-R1000, HONDA CBR600RR
Material:Aluminum and high quality product.
[How is it used?
I installed the Mount bar on my SEROW250 and it was so convenient that I wanted to install it on my SV650X.
I knew that SV650X can use Stem shaft fixed type as well as Mirror Holder installed type because of Separate handleType, and I thought it would be better to use Stem shaft inserted and fixed type. I found this product on sale, so I jumped on it.
How did you like it?
The bar is made of machined aluminum, so it has a sufficient texture. To be honest, if you attach a smartphone holder with a large size, you will not be able to see the bar part, which is a waste of space.
I bought the Silver one because the Black one was temporarily out of stock at the time of purchase. I am satisfied with the functionality of the product.
The product was more than Image.
How did it compare to other products?
This type is inserted into the hollow part of the stem shaft and fixed with a bolt, so it looks like a reflex.
The price is relatively low because it is on sale, and the quality is perfect, so I feel that Timing did a good job in purchasing a good product.
[Points to note]
The bolt for fixing is included in the package, so you may be able to adjust the height by inserting the collar up to 10mm.
Quantity in an easy-to-use Position:Once set, please tighten it firmly and securely with the proper Torque. (This is a testimonial.)
Other items that would be helpful
The deciding factor in the purchase
Material as mentioned above.:The deciding factor was the Reasonable price for an Aluminum Mount bar.
【Included Parts:presence or absence】.
Quantities of Mount Bar Body, Aluminum Collar to insert into the Stem shaft, Bolt and Nut for fixing, Fixing Collar with large outer diameter by tightening, and Instruction Manual.:Set
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you purchase the products you want to install at the same time, such as a power supply outlet, Smartphone Holder, Drink Holder, Camera Mounting Holders, etc., you can proceed with the work at a stretch.
Opinions and requests to Manufacturer.
This was my first time using Manufacturer's products and I am very happy with them. Good products at affordable prices. Thank you in advance.
View detail
This is a must.
Product Name
KIJIMA KIJIMA Handlebar Mount Bracket
Item Number
204-0683
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
Because it looks Stylish.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It's easy, just remove two Screws.
How was your experience with it?
I think it is easy to use and visible.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Installation of a 23 year old Ninja 400 is OK!
Installed on a '23 Ninja 400.
We were able to install the system without any problems.
Screws are not so hard that they cannot be removed, so I think a regular Hexagonal Wrench is Large sturdy.
If you ride a Ninja 400 and want to install a Smartphone Holder or USB Socket, this is a good choice!
View detail
Required when using different Helmet depending on Motorcycle
It is convenient to purchase multiple Bases so that you can use multiple Helmets. View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE
DAYTONAVehicle Type Multi Bar Holder
I purchased this product because it is required for Smartphone Holder installation. View detail
Body is expensive, so it is safer to put it up.
Since Body is quite expensive, I bought it just in case.
The large size is Exactly because it is a dedicated product.
There is no specific Instruction Manual.
There is no installation Guide or anything like that, so after locating the Large body, you just peel off the Seat and take a shot without thinking.
I was nervous, but it stuck well without any air bubbles.
I put on the protective Seat before installing the Body, so I do not know how the sensitivity of the LCD Touch panel on the Body has changed, but it responds properly.
Since the price is about the same as the LCD protection GlassFilm for the phone, it would be safer to put it on.
View detail