Reviews
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
It will be such a thing
Because you can not install with the License Plate Holder attached (If it is impossible, Large is durable) I removed the Holder and worn it.
It's angular and it's not unlimited, is not it.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
It is very good product of COSPA.
Put this item to cut the Rear Fender of Address and angle it to a near vertical number.
Is it because the vibration is Large in Single? Another Fender Eliminator is a strong Type that also fixes SIDE and more than double the price. Is that necessary?
Certainly, when running after installing, the number is fluttered, but if you prevent vibration from breaking out Number, you can either add Cushion between Number and Bracket or attach License Plate Holder
Is it okay.
There is no extra Bracket next to it, so I'm satisfied as I'm refreshing.
View detail
Pretty good
Installation was done at DIY. The manual is slightly unkind to the amateur. There is only OEM Parts and accuracy is good, car name Logo is included etc. etc. Quality is satisfactory. Angle adjustment of Plate mounting base is fixed so it can not be done. When I installed the License Plate directly, since the ground of Reverse side was exposed and it seemed poor, KIJIMALicense Plate Base (Black) We purchased separately purchased and installed it. Just this increased the texture considerably. View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Moderate angle ◎
It is attached to the original maker Scooter but it is not warped and it has become a very good angle. Normally it is hard to see NORMAL. Although the finish is slightly sloppy but it is a part that can not be seen, there is no particular problem. View detail
Fits: HONDA DREAM50, HONDA ZOOMER, HONDA Byte, HONDA GORILLA, HONDA MONKEY, HONDA APE
Recommendation also like Cost!
I feel a little angle from NORMAL. It is Recommendation because it does not feel unsatisfactory and the atmosphere of the car body also changes. Installation was also easy. The atmosphere from behind will definitely change! View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Nothing's backwards!
【What made you decide the purchase?】
It is decided that the comment of Impression and the height of evaluation
【How was it actually used?】
Certainly cheap and poor products are different in one taste and lid taste.
【Was it difficult to install? (Hard parts case)】
It was relatively simple as it removes the existing Number and tightens it together. Also handling Instruction Manual is described carefully so it is wonderful.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Do not over tighten Bolt kind, make sure that there is no loose after running.
[Is there anything I was disappointed about?]
This product is TAB screw at both ends, so you can install Nuts if you have one. In other words, since Ploy itself has Screw Mountain on both ends, it can not be used with PlateSingle Body.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I thought I wanted not to weld Screw Mountain.
【Have you compared items?】
License Plate Holder of POSH and so-called pushing raising
[Others]
I am using this product for reverse installation, because it is changing to POSH's Fender Eliminator Kit, the angle of Number is slightly rising so it was a little bit so it is for lowering the angle, please refer to the image. m (__) m
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Number Transfer
It is good to make it cheap and secure.
As the Number was moved to the back of the Backrest, due to Number which became too vertical mounting, the angle was adjusted with this product.
View detail
Used for Universal's Fender
I bought it because the hole fixing the License Plate to the Fender of Off-road motorcycle is not empty.
Besides DRC, there are products that fix License Plate with rough AndRoad, but we chose this because it is lightweight!
View detail
Fits: HONDA DREAM50, HONDA ZOOMER, HONDA Byte, HONDA GORILLA, HONDA MONKEY, HONDA APE
Commitment to invisible places
After installing Back fender stay, Fender and Number make contact and purchase as a countermeasure.
I also thought about Angle Change Type or Homebrew Bracket, but because it does not change the angle, it's more simple!
Where Laser is also hidden by Number, is Megukawa's commitment?
Both quality and number angle are satisfied
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
We recommend you to use the home center's Universal stay
【What made you decide the purchase?】 Since the Fender EliminatorSet is not in CBR 250 RR, since I tried to cut OEMFender by myself and turn it into my own Fender Eliminator, since the angle of Number is overturned, I will sell Universal Bracket sold at home center and so on so that it is level with the Tail part of Seat Cowl Although I was thinking to use it by bending it seems weak, friends broke Bracket while traveling in that way Bracket broke and dropped Number So when I was looking for a strong Bracket I found DAYTONA 's Slant License Bracket so I bought it Saw.
【How was it actually used?】 I was worried how much the angle would rise, but I felt it was just too crowded, because it faced the tail cowl just in line with the angle of the original Fender, it's a very nice feeling. Unlike the Universal Bracket of the Home center, it's solid, so it's a bit heavy but it's sturdy and it does not seem to worry about breaking.
【Was it difficult to install? (Hard parts case)】 Bracket itself is easy because it is attached immediately without processing anything.
【Please tell me the point of installation and hang (in the case of Hard parts)】 It's very simple, so it's not particularly.
[Is there anything I was disappointed about?] I wanted to decorate Number Bolt to Bolt, but I am sorry just because I can only use the Bolt included.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I'm happy if you can use decorative Bolt as I wrote above.
【Have you compared items?】 Home center's Universal Bracket
[Others] Although I was worried because there were few corresponding models, I could use it without problems for CBR 250 RR.
View detail
Number Easier for desorption.
【What made you decide the purchase?】
My car was an OEM Fender, because there was a possibility that Number and Blinker might drop out due to forest roads and intense vibration, I bought it to fix the number with this product by removing OEM Fender.
【How was it actually used?】
In my car, the mounting part is Plastic, so I had to open holes arbitrarily with Drill.
For the convenience of drilling a hole in OEMNumberCover, since I attached NumberCover directly to the vehicle now, I did not use it after all.
As a matter of fact, I planned to attach this product to the vehicle and License Plate Light to hold it with Bolt, but since License Plate Light is no longer usable, I no longer use this part.
【Was it difficult to install? (Hard parts case)】
Optionally drill a hole in the vehicle with Drill and you can easily Bolt-on.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Number Please go through holes and open holes in the car.
[Is there anything I was disappointed about?]
It's heavy except for. Although the parts themselves are solidly constructed, the installation becomes the end of the vehicle, so the vibration increases. Depending on the strength of the vehicle attachment part, Crack enters the vehicle, there is a possibility of dropping out by Number. Also, since ScrewFemale that comes with parts can be easily rotated without any tool by anyone, theft. Please be careful.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
For people whose usage is clearly decided, I think that it is a good changeable part of Large.
【Have you compared items?】
There will. It is OEM's NumberCover.
View detail
Off car etc License Plate Bracket
【What made you decide the purchase?】
I bought it because I wanted to attach Number directly to the car body Rear Fender.
【How was it actually used?】
It was easy to detach Number without tool when we wanted to remove Number.
【Was the installation difficult? (Hard parts case)
In some cases, we had to open a hole in the car body, so I used to care for the alignment.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I'd like to get the center of the car firmly, but quite human eyes are accurate. If you like me Large If you like body, you can work earlier if you work with parallelism and height determined visually.
[Is there anything I was disappointed about?]
There is none. I think that it is a good part.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There is none.
[Others]
It was easy to pierce Plastic by opening a hole with Solder iron.
Even if it fails, you can plug it with melted Plastic.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Exquisite angle
I caught OEMRear Fender and wore it when I made it to Fender Eliminator. The angle of Number has become exquisite and idealized. Making well, you can well fix Number and Reflector Bracket to Well. View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Angle adjustment of License Plate
Although it is for Address, I used it for angle adjustment of MONKEY.
Merit is few as it is broken or ugly if you adjust the angle with Bracket selling in Homsen etc. However,
This product is made durable and can be used with confidence.
Do not bounce up the angle like Mischief,
I am very happy with the feeling that it is slightly rising.
I do not know unless it is diverted,
When attached with Match, satisfaction is also Large (Lol)
Just until now Number has stopped with Taper bolt and I made it to Fashion with Bolt cap,
This does not use Bolt, but it makes me feel like Bolt to stay with Cap Nut.
It is not good that it becomes uneasy or uneasy due to vibration etc. Fashion difference disappears.
So I cut one ☆.
If you only mention saying that you attach an angle to Number, it is an undisputed Parts.
View detail
Because it is universal, it depends on ingenuity
Enough feeling of rigidity. It's Universal so you can install it on any Fender depending on your ingenuity. rigidity - I will exchange it for the price, I wish I had made it a bit lighter - - -. I think that it will be possible to produce satisfactory things if made with Aluminum, but it seems to be close to 10,000 yen. View detail
Maybe
Maybe - - It may have been installed upside down!
But you can arrive and do not mind!
I read notes on posting Impre.
"After posting the Impression that was posted, posting may be suspended if the content is judged inappropriate. "
Mackenzie w
Recent my impressions may apply to inappropriate contents w www
Recent Off cars are On, but Number and Tail lights - Blinkeretc. It is made to be able to remove everything by removing several Bolt, and I am deeply moved by the kindness of Manufacturer.
If it also goes back a little over 15 years, in this way you have to move the Number over the Fender. No, I do not dislike having to move it, or to drill a hole with Drill in Fender. Rather, I think that the License Plate of the Off car is on the Fender, and the part where it falls down in a forest road etc. and it is crushed into disgust is a constituent element.
Collapsed License Plate is a precious Attachment of Off car.
If you can understand it, this Laflo's License Plate Bracket is a Parts that must be purchased by anyone who rides a little older car.
Large body - - I like the products of Raflo and I recommend it because I use it quite a lot, but Off products are good for Raflo
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Cheap and easy
Cut Normal fender and attach it, it seems to have not bought a Fender Eliminator Kit.
However, if you attach it to a vehicle already equipped with the Fender Eliminator Kit, it will be too angled and will violate safety standards.
I think that it is cheaper and easier and better than making your own Bracket.
View detail
Built-in Number Installation
I think this is a good product. I purchased instead of Bracket when I installed Number.
Although it is slightly heavy, I think it is strong against stickiness and vibration because it is completely made of iron.
When you use Aluminum's guy with weight saving, it will almost break due to vibration in rough road driving, so iron is the best
View detail
Stainless Steel has thickness and is firm
I installed it in KSR 110. Stainless Steel has thickness and is firm. In order to avoid interference with the Tail lamp, I grinded the Center part of this Bracket with a little Grinder. View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Gentle angle adjustment can be performed and it is very satisfactory.I think that appearance from width may also be felt refreshed.angle attachment nonchalant on the Scooter -- carrying out -- recommendation.
Gentle angle adjustment can be performed and it is very satisfactory.I think that appearance from
width may also be felt refreshed.angle attachment nonchalant on the
Scooter -- carrying out -- recommendation.
View detail