Reviews
It's lighter than I thought and the finish is nice.
As soon as I received the car, I installed it right away.
It can be dangerous if you step into the chain.
I bought it because I have it, but the suspension load seems to be
For reasons such as stretching, I was slightly concerned.
However, it is very light and the clean finish is reassuring.
I think it can also contribute to the safety of the passenger. Satisfied ------------------------------------------------- --------- As soon as I received the car, I tried to install it. It can be dangerous if the foot enters the chain I bought it because I was there, but the suspension load I was very concerned about the increase, such as increasing. However, it is relieved with a very light and clean finish. I think it can contribute to the safety of passengers. Amazing Powered by Google Translator
View detail
For Circuit
I bought this for Circuit.
Installation is easy as it is bolted to the place where the Maintenance Stand hangs. It would be better if it looked a little more stylish.
View detail
For the price
Flimsy for the price and concerned about durability
It's Matte compared to OEMs and the products
Balance of the overall appearance because of its linearity.
I think it's too obvious that it's going to fall apart, or that it's going to be too bad.
How does it fit if the rear suspension is changed?
I'm sure there are other options out there.
I think we should be very selective about the variety.
View detail
ไม่ผิดหวังทั้งสินค้าและบริการ View detail
Fits: HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
Chain Guard that Offers Good Protection and Looks for the Monkey
About quality and texture: I am happy with the quality of the aluminum chain guard from SP Takegawa. A large chain guard like the OEM Honda guard but with a much nicer appearance with it's silver anodised finish on it's aluminum construction. About the feeling of use: You retain good protection from the chain like the OEM Honda guard but do away with the black plactic guard which takes away from the retro styling of the Monkey. Products to buy together: A fender eliminator would also be desirable to purchase alongside the aluminum chain guard to remove another black plastic part from the Monkey. Difficulty of installation: The process to install takes about 10 minutes, removal of the OEM Honda fasteners and chain guard is needed before installing the SP Takegawa chain guard using the included fasteners. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a a chain guard that is designed safety for use and made from a quality material with a matching finish. There are many chain guard options for the Monkey both cheaper and more expensive, the design of the guard is what seperates them but I have never gone wrong with any parts from SP Takegawa. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The SP Takegawa chain guards ticks the boxes for safety and looks with their design which can not be said for all the brands offer this product. View detail
Polished and Parenthesis nice.
I like the design of the polished and curved parts. Also, the packing of the product itself is very careful and I felt that the manufacturer's feelings are put into it. View detail
The performance is perfect. A lower price would be helpful.
?? [How is it used?
To prevent Sprocket from getting caught in the Circuit run
Even if you don't have it, you may be able to run it because it may only be recommended by Circuit.
You should check the Rule for the places you often run.
Was the one you received as per Image?
Street Image
Was the installation difficult?
Very easy:Bolt On Swing Arm with Plate and Color.
How was your experience with it?
No problem at all. It is inconspicuous and does not give a Custom feeling.
Parts that are really just to protect the Regulation.
[Included Parts:were they on?
Instruction Manual was included.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
A lower price would be helpful.
If you are a person who can do some Gold processing, it seemed that you can make it by yourself by buying Home center's materials.
View detail
Wow that's cool
It can save just a little weight. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
Takegawa Aluminum Chain Guard
Takegawa anodized aluminum chain guard requires only 2 bolts for install. (*New shiny hardware is included) Chain guard is a bit longer than the stock and is more eye appeasing. This Takegawa chain guard was purchased due to the clearance it allows for the shocks. The stock chain guard was rubbing the aftermarket shocks and this Takegawa guard was the remedy for the larger diameter shocks. Guard came packaged with care and the anodized finish looks like it will hold up to seasonal wear for many years to come. Before mounting the new Takegawa chain guard please remember to apply a small bit of thread locker to the hardware to prevent from coming loose as you ride. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
For a hard impression
Highly textured and easy to make dress-up parts.
MONKEY125 JB03 in Black with Aluminum texture
Increases the sense of luxury
View detail
K&T Heel guard
About quality and texture Very good quality anodize is a deep blue one that hasn't faded much for in dietect sunlight most of the time About the feeling of use it is a very discreet heel guard compared to some others barely noticeable About Design Thin ,minimalist of a heel guard does make you wonder how much it woukd stop the chain from impacting one's leg heel foot ? Haven't had to as my chain has not broken since putting it on About Size Chart n/a Cost performance and comparison with other products In my opinion a good price for the products quality About shipping and packaging I had no issues Any concerns, cautions, or advice when purchasing none I'd recommend it ! View detail
Processing assumptions?
The position of the screw holes did not match, which may have been an individual product difference, so I used Leutor to shave them down to match. View detail
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200 S
It won't come on unless the Tire is removed.
I have not been able to put it on yet because I have to remove the Tire to put it on.
Texture is the best
View detail
For dress-up purposes
I have RFender in Carbon, so I bought this to tighten up the Rear area.
I heard that many people were having trouble installing the swing arms, but I was able to easily install them by temporarily attaching them to the front of the swing arm and then shifting them to the rear.
I'm not going to Circuit, so it's a complete dress-up. (Lol) 。
But it was hard to wait six months………
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
SP Mukawa Aluminum chain guard
I think the price is a little high, but it's massive, and I love it!
The atmosphere changes just by changing from resin parts to aluminum parts.
View detail
good
Once purchased, you can rest assured that it will never break. View detail
Wide range of diversion
I bought the Chain Guard because it is mandatory to wear it when participating in races.
This is for the JC61 Grom, but I think it is structurally compatible with the Square Swingarm. If you have a narrower Swing Arm, you can use it by simply changing the bolt to a longer one.
I could have cut and pasted the steel plate, etc., but the dedicated product was still more convenient to use.
The Swing Arm of the Mini bikeClass is usually used to STAND-UP the rear, not the V-receiver, but the L-receiver.
This product has a missed shape so that the Chain Guard and Rear Maintenance Stand can STAND-UP without interfering with each other.
They also do not come into contact with the road surface and do not wear out when falling.
The texture is very good, but I think it's a little expensive, so it would have been better if it was a little cheaper.
View detail
Used with J-TRIPStand Hook
The size of the bolt is Exactly M8x50 P1.25, which is included with the J-TRIPStand Hook. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
It looks good.
Good quality. It can be installed easily. About a minute? I think it's a good dress-up item. And I think it's a reasonable price. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR
Just Parenthesis good
I don't know about the effect because I usually drive only on public roads, but I just love the Parenthesis. View detail