Reviews
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
CROSS CUB would be this!
Excellent stability, especially when loaded with Large luggage
Much more stable than DRC's LongSTAND
The base is wobbly, but according to the Instruction Manual, that is the spec.
View detail
STAND adjustment to match vehicle height
[How is it used?
When we installed the HighLink Plate, the car body tilted too much when stopping, so we purchased this product with an adjustment mechanism.
Was the one you received as per Image?
At the time of purchase This price is high for one STAND." But when I saw the product I received, I thought Well, I guess it's just too expensive." I've settled on the impression that the product is just like Image, though I still think it's expensive.
Was the installation difficult?
It seems to be screwed off at the lower 1/3 of the STAND and can be replaced with an attachment of a different length.
At first, I did not understand the system and thought that the length of the STAND was adjusted by loosening or tightening the screw.
How was your experience with it?
I wonder if it works well with the products made by DRC (both Large books are DirtFreak). The car body, which was too lean and uneasy in the Normal stand, is now as lean as in the Normal stand, and I feel more secure.
And STAND itself. "Forged" The product was not a product of the "I am a good person," but a high-quality looking product that was satisfactory enough.
[Included Parts:were they on?
This is the only product.
[Was there anything that disappointed you?
The functions and appearance of the product are sufficient, but it would be appreciated if the appearance and Material could be changed to a less expensive Material at a more affordable price (I can't repurchase the product if it is released after purchase...).
Other items that would be helpful
Point and hang of installation
Read the Instruction Manual properly and understand how to attach it before attempting to do so.
[Availability and clarity of the Instruction Manual
The Instruction Manual is included in the package and is easy to understand and illustrated.
To avoid being like me, read the Instruction Manual thoroughly before proceeding with the installation.
[Notes]
If you install it on a vehicle that has not been converted to high lift, of course the vehicle body will stand up too much and it will be unstable when stopping (although ShortAttachment will solve this problem). STAND for high lift measures." and should be used with the understanding that
The overall length of the NORMAL ratio is about 25mm longer. Conversely, the Short Type, which is 25mm shorter in overall length, is also available, so be careful not to make a mistake when purchasing.
[ITEMS TO BUY TOGETHER
Install STAND Spring Spring hook." If you can afford it, it may be a good idea to purchase the products at the same time.
[Opinions and requests to Manufacturer
As I mentioned above, please use inexpensive materials and reasonable pricing while keeping the same functionality.
View detail
I wonder if the Spec. has been changed.
I was interested in this product, but I saw many impressions that it had a " mysterious protrusion " and could not be stored completely, so I hesitated to purchase it. It is true that the protrusion has been removed and it can be stored properly. (The vehicle in which it was installed is a 23-year MODEL JA60) However, I think it can be attached to the previous MODEL as well. View detail
Pricey but worth it.
It is a simple shape, but the steel plate is thick and well painted. The price is high, but the quality is commensurate with the gold price, and above all, it may be rather inexpensive considering that it supports the body of the car. View detail
Fits: HONDA PCX, HONDA PCX160, HONDA MSX GROM, HONDA MSX125SF, HONDA MSX125, HONDA GROM, HONDA DAX125, HONDA MONKEY125, HONDA ADV160, HONDA CT125
Since Lowdown.
When I assembled the NMC Lowdown Kit, the OEMSTAND was almost upright, so I replaced it with the SPTakegawa Adjustable side stand.
The main reason for choosing this product is that it is compatible with OEM stand switch.
The replacement process itself is easy, and it is a good idea to have a special tool for removing the Spring.
The length of the side stand is adjustable, and the kick-up portion is larger than OEM, so I am satisfied with the ease of holding the stand in place.
View detail
![[Option Parts]ReplacementTip](https://img.webike-cdn.net/catalogue/images/55193/ze56_8939_TS.jpg)
Exactly for klx250 OEM ride height
[How is it used?
I purchased this product because I need this product to install the following forged AluminumKick Stand on my OEM ride height KLX250.
https://www.webike.net/sd/23952653/
Was the installation difficult?
Simply remove and install the Bolt1 pc.
Note that the Socket will not fit in the hole unless the outer diameter of the Socket is small.
How was your experience with it?
It worked fine
View detail
Installed with Lowdown Kit
[How is it used?
When we decided to lower the CBR1000RR-R, the OEM side stand would cause the vehicle to stand up too much when the vehicle comes to a stop. The short side stand was introduced because the side stand needs to be shortened to accommodate the lowered body.
Was the installation difficult?
I asked Motorcycle shop to install it because it was replaced at the same time as a Lowdown Kit made by another company.
How was your experience with it?
It has been about a month since the replacement and no problems at all.
The car body is at just the right angle without standing up too much or lying down too much.
View detail
OEM is getting bald and bald and needs to be replaced.
[How is it used?
Installed on KLX250 OEM ride height.
The tips are too short to install at OEM ride height, so we replaced them with ↓'s 105mm Option tips.
https://www.webike.net/sd/23908023/
Was the installation difficult?
Easy installation using only common tools.
Remove the Side Stand, so if you have a Maintenance Stand or a Motorcycle stand, use the Large sturdy stand.
How was your experience with it?
Refreshing because the OEM was bald and bald.
I feel good about it because I think it has reduced the weight somewhat.
View detail
Fits: HONDA PCX, HONDA PCX160, HONDA MSX GROM, HONDA MSX125SF, HONDA MSX125, HONDA GROM, HONDA DAX125, HONDA MONKEY125, HONDA ADV160, HONDA CT125
Highly satisfied!
After 20mm low down with normal stand and reinforced side stand bracket made by ENDURANCE, it stands almost upright.
I searched for Short Stand and came across SP Mukawa!
I am Large satisfied with the form and function.
Adjuster adjustment is almost always the shortest.
STAND is easy to put in and out.
The availability of NORMAL switches was a deciding factor.
The price was indeed high, but I was satisfied with Large.
View detail
Installed on JA10CROSS CUB
I was told that it was not compatible with JA10CROSS CUB, but I was able to install it successfully.
We have slightly modified the STAND, but there are no problems.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
Fits: HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard
Total length 190-200
Excellent appearance and rustproofing performance.
I am using it on the APE100 at the same time as a Side Stand Bracket from another company, but it is too short and may cause the vehicle body to lean too much.
View detail
Can be used with Racer9GT
Not listed in the compatible car models, but can also be used on the Racer9GT.
I have installed Y's Gear's Lowdown Link, but the body of the car is inevitably standing up.
It says that the XSR900 and MT09 are also compatible, but I was able to use it on my Racer9GT without any problems.
The unit can be installed without any modification. The angle and position of the spring can be installed without any problems.
We are very interested in your position as a member of Y's Gear's Lowdown Link.
There is no guarantee of compatibility, so please do so at your own risk.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Great value!
The item I received is beautifully made and looks and feels great.
I watched it in Living for a few days!
To install it yourself, you will need the appropriate tools, grease, and either a Center Stand or Maintenance Stand. No skill is required.
Please note that this is an OEM length and will not fit Lowdown cars.
For some reason, all of my previous motorcycles had been replaced with PlatingSTAND or Stainless SteelSTAND, so I was relieved to find that something felt right with this replacement!
We hope you will too!
View detail
For practical users
NORMAL JA58, but installed ahead of time in anticipation of future Case installation.
Installation can be done by beginners. Even an inexpensive box wrench set can be used.
The mountainous point is when putting the Spring back in and when removing the STAND axis Screw.
Note that the STAND axis Screw is an Opposite Thread Screw.
The quality of the material is good, but either the jig is wrong or our vehicle is wrong.
Merit does not seem to fall over even when SIDE hung with luggage loaded in the cargo bed.
Durable due to solid color and structure, NORMAL looking.
Demerit is heavy (this is a TradeOff relationship with durability and reliability, so it can't be helped)
If you like the NORMAL style, don't carry luggage, or don't attach boxes, these parts are meaningless. It will only make the car heavier and worsen fuel consumption and steering stability.
It is designed for touring and people who carry a large amount of luggage.
View detail
![[CAMEL]Camel Toe Side Stand](https://img.webike-cdn.net/catalogue/images/95829/CAP-T7-CTS-1_TS.jpg)
Bonsai Moto Camel to Side Stand
TENERE700 (Lowdown with RALLY50Kit) Mounting to
The wide stand end of the camel toe makes parking on the ground almost carefree. I had no problem getting the STAND out of the car. 。
The installation was TENERE elaborate? The installation was quite large and strange due to the cumbersome construction. The construction is sturdy, and the paint is a nice black color that does not stand out in an odd way. No need for a stand end after installation, and it feels good to use. Other than the slightly high price, I am satisfied.
View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
Title is not specific.
Well, if you directly connect to the Internet, you don't need it, but it is quite narrow to get in, so if you think of it as a convenient item, it is cheap and inexpensive! View detail
Mounting after Lowdown
I had been using OEMSTAND for lowdown, but the motorcycle was in a standing position when stopped, so when I turned off the handlebar and stopped it, it was about to fall over. View detail
The anxiety when using Side Stand has been eliminated.
The product itself is quite strong.
The change in position of the Side Stand stabilizes the vehicle when carrying a heavy load such as a Rear box. Personally, I was satisfied with the Large size.
As for the installation, I think it needs to be Torque managed well, so tools and knowledge will be needed.
The only thing is that the distance from the Center Stand is closer, which may be a concern for those who use the Center Stand frequently.
If you are not confident about the work, we recommend that you have it installed at the Shop.
View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure
I can stop it without worry.
Surprisingly Large, easy to install, and can be unthinned and STAND. View detail