Reviews
It is GOOD if you apply it while pulling.
[How is it used?
I'm running Enduro on my Motocrosser, and I got a Wheel for Enduro, so I put this product on it.
Normally I would use Rim tape, but due to the way I change my tires, Tape is more convenient for me, so I chose this one.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just put it on after degreasing with Parts cleaner etc. firmly.
How was your experience with it?
When I change the tire, I put in the tube with the bead stopper after putting in only one side of the tire, and put in the other side of the tire. I don't have to worry about Rim Band anymore.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
If it's winter, I think you can stick it more strongly if you warm it up a little in front of the Stove.
View detail
easy to stick to
[How is it used?
I got a Wheel for Enduro, so I attached this product to it.
Normally I would use Rim tape, but due to the way I change my tires, Tape is more convenient for me, so I chose this one.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just put it on after degreasing with Parts cleaner etc. firmly.
How was your experience with it?
When I change the tire, I put in the tube with the bead stopper after putting in only one side of the tire, and put in the other side of the tire. I don't have to worry about Rim Band anymore.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
If it's winter, I think you can stick it more strongly if you warm it up a little in front of the Stove.
View detail
The important thing is the last Dryer.
I'm getting bored with the pure black Rebel and am slowly adding color.
I was going to use White for the Rim sticker, but I thought it would be better to use the same color as Honda's Emblem, which is a bit raw and silvery, so I chose Light gray, which seems to be the closest color on the Catalogue.
The actual color that I received was a little darker Titanium-like color (but not Gun meta) and I thought it was darker than I expected, but when I put it on, it fit well.
The Rim width of the OEMWheel of REBEL250 is 14mm, so I chose 10mm which seems to be the thickest among the compatible ones.
I wanted to use the special Attachment, but it doesn't support 10mm, so I had to apply it by hand.
With the 10mm Rim sticker, depending on the angle, it looks like the entire Rim is colored, which is cool.
What can I say, the angle is difficult. It's hard to make a circle.
It's a little off, but I'm going to Challenge again when it comes off, so I'm not going to let a little thing get in the way this time.
Degrease it and wet it thoroughly with a thin piece of neutral detergent before applying it.
I match the whole somehow, and when I finish pasting, I adjust it slightly, and finally dry it with Dryer. Or rather, I fix it.
This Dryer was very important.
By applying the Dryer firmly, the Sticker tightens up and absorbs the messy part. I was able to apply the Dryer while tracing it with my finger, and was able to put it on beautifully.
When the Sticker is cooled down, wash it with water to remove the detergent from the Wheel. Now it is completed.
The whole process took about 30-40 minutes.
View detail
It goes up nicely.
I have been using MDF Rim stripe for a long time.
It is durable and can be easily and cleanly applied using the Gauge.
View detail
It's so much cooler now.
I have been using Green OEM Rim sticker on my Z400 since I bought it new, but recently I got tired of it, so I was looking for a good one, and I found MDF Rim sticker. I also bought a special gauge for sticking, and did it while watching the procedure of Site of MDF, and I was able to make it good. View detail
GoldMirror Bracket Exclusive Type (6M) Installation
I used to have these on my V-strom and was satisfied with the quality, so I chose the MDF ones without hesitation.
I thought it would stand out with GoldMirror Bracket exclusive Type, but it's not so flashy and it matches well.
In the beginning, I used a special attaching gauge, but is it not suitable for the Small diameter wheel? It was difficult to adjust the position, so I applied it without using the gauge. There is a place where the matching surface is a little off, but it is not a problem for me because it is not understood unless I look closely.
The effect is Large for a little dress-up.
View detail
what on Earth is this?
I gave the car a proper wash and degreased it and got to work.
No adhesive like.
I couldn't paste even one lap and went to Garbage bin.
The stickiness was Garbage.
View detail
What the hell is this?
I washed the car properly, degreased it and set to work, but the adhesive was as good as gone.
I couldn't even stick it on for one lap.
I immediately went to the Garbage bin.
View detail
A little pricey for what it is.
The quality is Level with no problem.
If you paste it according to the Instruction Manual, you will not have too much or not enough Tape.
I was able to attach it without any problems.
I think it is better to use Maintenance Stand for Rear to put it nicely.
View detail
Imitation Chain
I'm trying to up-date a 30 year old Motorcycle to 2020s style...
I've heard about NS-1 suspension, but if it's CBX, it must be ComStar.
Spice up your ComStar! That's why I put it up.
Yeah, something about Impact and Parenthesis is good!
View detail
It's a little plain.
It was easy and clean to apply. I don't know how durable it is yet. The color was a little plain. View detail
It looks pretty different.
It looks better than without Sticker. I think this is a good price. View detail
The sooner you put it up, the better.
It's not only for dress-up, but also for wheel protection after you buy a new car. It's a great idea to have it on your custom bike. View detail
This is for the off car.
I put it on my CRF250RALLY50.
I've been wearing the Manufacturer's Rim stripe on all my motorcycles for the past 10 years, and using it with the SpokeSkin makes it even more flashy and custom, and it's a Recommendation!
View detail
At the same time as Tire replacement. I used it for the first time.
[How is it used?
I worked with them when I changed tires before the 8 hour Endurance Enduro endurance race.
How was your experience with it?
It's no different than TubeBand and works fine.
How did it compare to other products?
This is a comparison with TubeBand, but the work is more laborious here.
but it is good to use for various Size.
View detail
While replacing the Tire.
[How is it used?
We worked together when we changed the tires before the Enduro endurance race.
How was your experience with it?
It's no different than TubeBand and works fine.
How did it compare to other products?
This is a comparison with TubeBand, but the work is more laborious here.
but it is good to use for various Size.
View detail
Good!
More volume in the suspension, which I'm personally happy about!
I also bought a special sticking gauge together, but it took me a while to get used to sticking it!
View detail
Slightly difficult to construct
You can learn how to apply it by Instruction Manual or YouTube, but I felt it was quite difficult to apply it neatly until I got used to it.
So, depending on the motorcycle, I think it's a good idea to practice from the rear exhaust system side, which is less noticeable.
Some bubbles and floats have formed, but it is still firmly attached after about six months of installation.
It's hard to tell from the picture, but to the naked eye it has a decent metallic feel to it. The width is 10mm.
View detail
The imeChain effect is outstanding.
The color choice is important because it changes the whole atmosphere. 6mm is better than 10mm for GSX1300R HAYABUSA. View detail
Not long enough…
I attached the overlapping part of the seal according to the dimensions in the Instruction Manual, but in the end it was about 1cm short.
You might have to stretch it a bit as you pull it off. 。
I think it's cool in its own way.
View detail