Reviews
Expected
I raised it by 30mm
I put a high seat in KLX125 and installed it at the same time It takes a lot of courage to raise it, so please be sure to examine it carefully before installing it
The quality is absolutely fine
Both Under and Upper are Quantity:Parenthesis in Set is good
Under is enough to be functional, but I don't think it was 30mm
View detail
The slightest difference is a Large difference
What made you decide to buy?
Changed the position because I was not good at standing when driving off-road
How was your experience with it?
The Handlebar position has been raised slightly, but Standing is now easy to do I didn't expect the pull and aperture of the Handlebar to change so drastically
Was it difficult to install? (In the case of hard parts)
It's very easy to install and remove the four bolts for the Handlebar installation It's not so easy to change the height of the hose and Clutch Cable that it interferes with the It's easy to install and remove, so if you're not happy with the position, you can change it It's the perfect Parts to try out
What is the point or hang of installation (for hard parts)?
There are no hard points Front Quantity:Back Quantity after tightening the 2pc bolt:It's enough to book-tighten a 2pc Bolt
[Was there anything that disappointed you?
None in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
It's not easy to adjust the height of the Handlebar itself, but it's not easy to change a lot of bars The more height variations, the easier it is for this Part, the better I'm glad
[Do you have any products to compare it to?
Can you change the position of the Handlebar itself? HandlebarManufacturer compared and contrasted with the previous HandlebarProfile makes it easy and inexpensive to get a little extra for your needs It was a product that I could easily try out with a casual feeling that if I wanted to try it out for a while and it was no good, I could take it off
[Others]
The 19mm dimension is a height change that's lower than one Grip, but I've seen it work this well, try it and see what happens I didn't understand until I saw it
Even if we have to change the position of the Handlebar itself again in the future, we can change the position of the Handlebar by a fewmm It was an indicator that allowed us to decide how much we should change
View detail
Height is not enough
Purchased for improving KLX 125's standing.
If it is 19 mm it will not be able to benefit so much ...
I regret that I should have made it one more step higher.
View detail
Good cheap functionality
Purchase was purchased for Position adjustment at the time of vehicle purchase. Accuracy was installed normally without problems. I have used it for 3 years, but I use it without problems. The price is also cheap and it is good because there are color variations as well. View detail
Good for Touring ? Suppression is weakened
I installed the same product of 30 mm in front car SUPER SHERPA with about 3000 yen. Front brake line is pat, but it was as good as you want everyone. Touring SEROW has 19 mm. I feel like I got high-class work that I got better accuracy than before. My arm got easier, but I feel like I got a bit uneasy on rough terrain. It hurts that the price was about 30% higher. I closed it at 23 Nm. View detail
it's the best.
Even though 19 mm, the effect is amazing.
It is easy to ride.
I installed it in the GSR 750, but the pain in my wrist has run out.
It became hard to get tired even over long distances.
Large I'm satisfied..
Recommendation.
View detail
CRF 250 L Mounted on model MD 44
CRF 250L I bought the 28 □ Handlebar of the Zeta to the MD 44 type, the installation was very easy, the feeling of use is satisfactory. It got about two-tenth higher and it became easy to ride very easily even in the case of standing, and I felt less fatigue of the arm even at long distance. View detail
Gero excursion is easy to apply front and rear loads!
SUPER SHERPA has lower handlelebar height than other Off cars
In the forest road, especially Hill climb, the line of sight was low so it was hard to see the end.
In NORMAL, since the forward and backward load movements are low center of gravity movements, Traction was difficult to apply.
10 mm up with HardyHandlebar 30 mm up with barize
It improved considerably with a total of 40 mm.
View detail
Try 30 mm Up once
Change to 19 mm → 30 mm of same product.
It changed dramatically. It is easier to operate even with standing, as well as Sitting. This way you can run through the forest with Standing. It has become more fun to run.
(* Height 173 cm, Normal seat & Handlebar)
<How to install on CRF 250 L>
Please keep in mind the following as Cable will stretch as it is.
- Slide the Clutch & Brake lever inward by 10 mm.
* In my case, I'm staggering 12 mm to fit the Zeta's Stingray hand guard.
- Bracket through which Throttle Cable passes (Top Bridge, Frame two places) Bend to make room. Also, in the Bracket part on the Frame side, put Clutch Cable first.
- Throttle Cable Change the angle of the root (Throttle part)
- Kill Handlebar a while ago (When giving more room)
Etc.
View detail
Easy to adjust the position of Handlebar
Easy to install and very convenient as you can change the bar position ready. Although the texture is also good-looking Items, I think that the price is somewhat expensive. Is it okay even if it is 1000 yen cheaper?
View detail
I think it's good.
REBEL (Manufactured by 1996) Mounting on.
When the handlebar was cut to full, my arms stretched out, so I attached them and pulled Handlebar further..
You can go without changing Cable classes.
It's easier to handle.
Although the performance of Motorcycle will not rise at all, it is a good Parts to improve ride comfort.
View detail
Easy Position change
Used in KSR 110.
I have installed a low handlebar outside the company, but I thought that I wanted a little more height.
Bought this product because it is cheaper than the new purchase of Handlebar and has less time and effort (*^_^*)
You can change Position easily, satisfied with Large change.
View detail
It was better than I expected.
I did not expect much on 30 mm Handlebar high up, but both Sitting and Standing made Position easier. View detail
It is convenient Items for Position adjustment.
Because I had a Handlebar with a height lower than the OEM in Motorcycle purchased in second hand, I felt tired slightly forward and I felt tired, so I attached this kit.
Although it is a change of only 19 mmUp, Position has improved a lot and it became my liking.
Work is easier than replacing the Handlebar, so it's a very useful item for fine tuning.
View detail
It will be an easy attitude
Just a little ride at NORMAL's Handlebar position - If I commute I am durable, but when I reach a long distance I feel tired from the arm to the waist, but it got much easier by raising the 20 mm offset and the height 26 mm behind.
It's easy to install.
View detail
Easy but influential CustomItems!
Working time is less than 10 minutes.
It is very easy to work as many people have already written,
It does not interfere with Cable classes, it is gorgeous also in appearance,
Although it is Up less than 2 cm it has made driving easier.
With me being 177 cm tall, Throttle operation is difficult when standing at the car's CRF 250 L,
Because I felt the necessity, purchased using Point.
It is considerably a recommendation for those of similar physique.
It looks like a product that also carries stock and arrived at hand on the next day of ordering.
Slightly cheaper than the list price (About 110 yen or so?) This is also a blessing point.
Only one thing "Yup" If I mention the point that it is, it is too cool!.
Because it gives a prominent presence to the humble OEMParts group, a slight sense of floatingness will emerge.
In other words, the envy to the surrounding Parts around the handled bar will be further increased ....
View detail
1. 9 mmUp, but quite effective
I attached it to MT-25.
Installation is easy, but where Clutch Wire's Length is Limit?. It is slightly taut at the Handlebar Lock position, but it seems to be safe for normal use. If it is more than this size, I think that Clutch Wire and Brake hose should be made longer.
I feel that it has become quite close when I straddled. It will be a pretty easy attitude.
As this part is Aluminum Material, corrosion and discoloration peculiar to Aluminum are likely to occur. I think the only problem is there.
View detail
Easy Bar rise kit
I gave 19? Handlebar with MT-25. Large was durable after adjusting Wire a little bit. Position became very easy. I really want to raise, but I think Wire will need to be replaced. It looks beautiful and is satisfied with Large. View detail
Recommend ♪
Riding position will be easier.
Especially town ride.
I should have attached it earlier..
On the structure of the car model, the attached Bolt is not enough.
I purchased Bolt separately.
Rear Sets, Seat without bean curd
It became Position ♪
View detail
Large satisfied
I tried to change Seat to Bucket type so I decided to change it to Narrow handle, but since I installed Hot grip first I gave up Narrow handle and bought this Bar rise kit. Work finished in about 15 minutes and Brake hoseetc. I could install it without changing it. I felt that it was suitable for long distances by 20 mm in the back, 26 mm up and also leaning on the Bucket seat and upgrading Handlebar. The price is slightly higher than Narrow handle, but work time and Others' Cost (Grip - Bar End fee) I think that it is cheaply rising. As I got on the train, it became easier for Breaking when Left folded because it is a SIDE marker.
View detail