Reviews
It's a practical item
Looks great on my red monkey125 It's a product that can be installed relatively easily and is practical If you think about the details of your bike, I recommend And have to buy two on each side, so that you don't make the mistake of buying only one View detail
While replacing the Fuel Hose
It's cheap, stops well, and is a Repeater. View detail
Samco Sport Hose Clamp Kit for Honda CBR1000RR 2017
When I purchased the last set of hoses for another bike, I forgot to also order the hose clamp kit. My bad, I actually remembered this time so tere was not going to be any delay in getting everything fitted. Webike had these at a really good price and slightly better than I could source locally. With a few other patts along with the gose kit, I had this order shipped by EMS and everything arrived in perfect condition in 5 days. I suppose, if you look at them, you would just think they are standard hose clamps but these are made to fit this specific bike, no trying to tighten a clamp that really does not want to fit that hose, all perfect and came with some instructions etc. You also have the added benefit of using either a socket or a flat blade screwdriver to tighten or loosen. Too many manufacturers just use with flat blade or cross head which can become worn real quick. These are not some cheap quality hose clamps, they are the real deal. Very smooth operation, no sign of any binding. I would say one of the better brands to get your hose clamps from. Very pleased with how this all went together and the bike looks mint now. Thank you Webike, very happy customer. View detail
Babyface Hose clamp
I purchased the same size to match the 7Φ of the KRH hose, but the size did not fit and I could not clamp it. View detail
สินค้าแท้ใหม่ตรงรุ่นส่งไวมากๆ View detail
สินค้าตรงตามที่สั่งแท้แน่นอนส่งรวดเร็ว View detail
DAX125Custom
I bought this for customization around the handlebar, and unlike Tie Wrap, it has a more upscale look. View detail
Very good Size
[How is it used?
Touring, city driving
Was the one you received as per Image?
Street Image
Was the installation difficult?
It was easy.
How was your experience with it?
It was good
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
Easy to rust
View detail
To fix theHose
I used it to fix the hose on the CB223S Air cleaner.
The air cleaner is made by DAYTONA and the hose is a cheap Oil Resistant Hose from Homsen.
The inner and outer diameters are different, so it is not a perfect fix, but so far no problem.
View detail
For replacement of Fuel Hose!
I purchased this product when I was replacing my Fuel Hose. It is reasonably priced and easy to use. It was good. I would like to repeat it again. View detail
Fits: APRILIA RSV 1000 Mille, APRILIA Tuono 1000
SAMCOHose needs a dedicated Hose Band!
We installed SAMCOHose this time. SAMCOHose has a dedicated kit for each car model, and there is also a dedicated Hose BandKit that corresponds to that dedicated kit.
The Hose Band is highly recommended for the SAMCOHose because it has a very high quality feel, and the inside of the Band is not uneven, so it is designed to prevent damage to the Hose.
The downside is that the Kit costs about 8,000 yen, which is quite expensive, but you still want to use a good Horse Band for your expensive SAMCOHose.
View detail
For bremboOEMHose
[How is it used?
Brembo master is installed on MainMotorcycle's XJR1300C and Racer's YZF-R25 MASTER.
Oil hose from bremboOEM is 9.5Φ Clip that comes with brembo tank kit is not so good......................................
I was looking for a good hose clamp and found this product.
So far, the Fluid leakage and other problems have been completely solid, so I can safely recommend it.
Was the one you received as per Image?
The surface finish is even better than Image's! The price is cheap and the two-pack is easy to use.
Was the installation difficult?
It's not hard to do
Even if you want to replace only the clips, you have to disconnect the oil hose once.
I think it is better to do it with Timing to remove Brake fluid such as Fluid replacement.
How was your experience with it?
In a good way, it is insanely hard. It's tough to spread Clamp with bare hands.
It should be properly pinched and spread with radio pliers, but it is better to apply Dustcloth or something else before applying the tool because it is easy to scratch it.
Also, it is quite tight when passing through the Nipple section. If you try to pry too hard, you may damage the Nipple side.
After moistening the brake hose with Parts Cleaner or similar, slide it into the brake hose.
It can be installed without giving Stress to the surrounding Parts.
[Included Parts:were they on?
As shown in the picture, ClampQuantity:2pc. Nothing but Set.
[Was there anything that disappointed you?
Nothing in particular. If I had to say, I'd say it's too hard and could be softened a bit.
I think the knob could be made a little bit larger to make it even easier to use.
View detail
For Fuel Hose
Used for Fuel Hose.
The tank is firmly fixed and can be easily removed by pinching it with pliers.
This is a product that I am glad I bought sober.
View detail
Hose Clamps that Continue to Hold their Clamping Strength for the SP Takegawa Kits
About quality and texture: I am happy with the quality of the hose clamps from SP Takegawa. Made from a steel construction with an external diameter of 15 mm and an internal diameter of 13 mm. About the feeling of use: These hose clamps from SP Takegawa are very strong and continue to hold their clamping strength after being removed and installed many times. Products to buy together: Some 8mm clear breather hose from SP Takegawa would also be desirable to purchase alongside the hose clamps for you to be able to connect up to your catch tank. Difficulty of installation: The process to install takes just a few minutes for each hose clamp, I find the strength of the hose clamps too high to be able to fit by hand so use pliers to complete this. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a high quality material hose clamp at a fair price as compared to the lower quality material some brands use for their hose clamps that lose their strength over time. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: SP Takegawa offer their hose clamps in four different sizes but if different sizes are required then NTB hose clamps maybe what you need. View detail
I'm not sure if it's effective or not, but I'm not feeling it at the moment.
Carburetor Joint of R1250RT, wrapped near Injection.
The material is stainless steel, which has a lower conductivity than aluminum or copper, so I am not sure if it can really be used to eliminate static electricity.
In a way, it is hard to know if it is effective or not, so I bought it with the points I saved.
Incidentally, R1250RT is Carburetor Joint is Quantity:Pair (for Left and Right) Quantity:You will need 2pcs.
The installation was not so difficult.
View detail
Black and cool
In Black. [Color] Clear finish, apparently.
Normal water-cooled Hose is 18-32
View detail
Hose clamp
Purchased to tighten Hose when installing Fee Filter 。
Simple and reliable Clamp.
View detail
textured good feeling
This type of Small product is expensive, but it is good and affordable.
The OEM hose band was shabby with white rust and was a pain to remove, so we replaced it with this one.
I have just installed it, but the surface treatment is solid and seems to be durable.
The beveled cross section makes it less aggressive to Hose.
There was another part number for Rear, so I bought it, but both front and rear were this size (Z900RS, 250SL).
View detail
textured good feeling
This type of Small product is expensive, but it is good and affordable.
The OEM hose band was shabby with white rust and was a pain to remove, so we replaced it with this one.
I have just installed it, but the surface treatment is solid and seems to be durable.
The beveled cross section makes it less aggressive to Hose.
There was another part number for Rear, so I bought it, but both front and rear were this size.
View detail
It improves the appearance of theHose.
Not only the appearance but also the deterioration of the fluid can be visually observed, which improves maintainability. View detail