Reviews
Fits: DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1098, DUCATI 1098R, DUCATI 1098, DUCATI XDiavel, DUCATI XDiavel, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro
A little dress-up
The rear sprocket, flange, and flange cover had been replaced with CNCRACING ones, but the flange nut was OEM, so the flange nut was replaced as well.
The work was done by a Dealer because I don't have many tools, etc.
Since it is a Flange nut, there is no need to change it unless the Flange is replaced.:Aluminum, so it should be replaced at the time of replacement.
Other products from CNCRACING with Red Anodized paint do not fade mysteriously, but this Nut has been in use for about 6 months and I think it is fading.
It is good for a little dress-up.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
I feel like Engine tuning!
[How is it used?
Normal city driving
Was the one you received as per Image?
Yes
Was the installation difficult?
Installation is easy since it is a replacement for the NORMAL, but it must be tightened with the specified Torque.
Tightening is easier to apply Torque because it is Longer than NORMAL.
How was your experience with it?
It looks Tune.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
We don't get to utilize it very often, but we need it for Clutch disassembly!
SmallEngine Displacement Volume is essential when servicing the clutch disassembly etc. of a car.
It has a special shape and is well made. It is a very useful tool, as it is impossible to remove the clutch without it.
Some people sometimes use a slotted screwdriver to knock them off, but it is definitely better to have a slotted screwdriver than to have to use a slotted screwdriver for installation.
I think the price seems high, but I guess that's to be expected since it is a specialized tool.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
KITACO Center Lock Nut Wrench
About quality and texture - Top quality. Solid steel construction with 1/2" drive for connecting your tooling. About the feeling of use - Very strong tool. I thought I might have some issues torquing down the nuts with only those 4 little fingers but it's not a problem for this tool. Products to buy together - To use this tool with ease you will be needing something to stop the part from rotating. You can either go with the gear holder or pulley holder which are both available here on Webike from Kitaco. Difficulty of installation - The tool is easy to use, not much else I can say here. Cost performance and comparison with other products - The price looks to have increased from the time I purchased it so now there is better value available from other brands but still priced reasonable for a top quality tool that will last you a life time. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - MiniMoto do a Monkey engine special tool set that has all the unique tools for these engines, wish I bought that from the start. View detail
Convenient
Well nut is used for Cowl and Screen.
I bought it FOR REPLACEMENT because the RUBBER deteriorates as it gets older.
I think it is a good value because the Gold amount is lower than OEM and the quality is the same.
View detail
Even if you put it on and take it off.
I think Large is a good product because the Screw Mount is not ruined even after putting it on and taking it off several times. View detail
Fits: HONDA MONKEY R, HONDA MONKEY, HONDA DAX, HONDA XR MOTARD, HONDA CHALY, HONDA BENLY , HONDA APE
New ROD, so new Nut!
I renewed the ROD when I lengthened the Shift rod, and I also renewed the Nut while I was at it.
Since it is a Stainless Steel ROD, it must use a Stainless Steel Nut or it will be Rusty....
It is an ordinary Stainless Steel Reverse Nut.
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z750, KAWASAKI Z2 (750RS), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100 GPZ
For Sprocket diversion
It was used to divert the Sprocket of the Z system to Kawasaki's Zr-7S.
As you may know, the shape of the sprocket nut on Zr-7S, ZEPHYR750, ZEPHYRχ and other relatively recent vehicles is different from that of the old Z series.
The Sprocket nut on the Zr-7S has a two-stage outside diameter, but the Sprocket nut on the old Z-series cars is just a Nut.
Incidentally, on newer vehicles such as the ZZr1400, the speed sensor is often taken from the front sprocket rather than from the meter gear on the front wheel, and the outside of the sprocket is square on top of the two-stage structure.
I believe it was M20 or M18 (I did not measure it).
So why did I need this Sprocket nut……
This is because the Sprocket nut in NORMAL did not allow the use of a turning Washer.
As a result of diverting the Sprocket, the Zr-7SNORMAL anti-turn washer could not be used, and the anti-turn washer also had to be diverted from the old Z-series washer.
Then, the outer diameter of the NORMAL Sprocket nut was too large, and the washer could not be broken off.
After researching, I found out the difference between Sprocket nut, as I wrote earlier, so I decided to purchase it.
The result was a Large success.
The same Screw diameter and Pitch of the Counter Shaft could be installed in the correct way.
Parts installed together
・Sprocket
Brand：SUNSTAR SUNSTAR
Product name:8mmOffset sprocket
Part Number:3C6-17
Non-rotating Washer
Brand：DOREMI COLLECTION DOREMI COLLECTION
Product name:F Sprocket Washer
Part Number:10483
View detail
prevention of slackening
Lock nut to prevent loosening.
I am relieved to know that this will not loosen easily.
View detail
Fits: HONDA glom, KAWASAKI Z125 PRO, HONDA MONKEY125, HONDA ZOOMERX, HONDA ZOOMERX, HONDA ZOOMERX, HONDA glom, HONDA CB400 F (JF52-1000001-), HONDA DAX125, HONDA 400 X , HONDA CB400 R, HONDA CB250 F , HONDA CBR250 R, HONDA CBR125 R, HONDA MSX125 SF, HONDA MSX125, HONDA MONKEY125, HONDA CT125, HONDA CL250
Great stuff. It makes my bike looks better. View detail
I bought Pitch 1.5 by mistake.
[How is it used?
I purchased this product to secure the Engine Guard.
How was your experience with it?
The thing is fine, but I made a mistake and bought 1.5 when I needed Pitch 1.25.
It is made of Stainless Steel called SUS304, so it should be basically rust-free.
Prices are also available in the Quantity:I think it is reasonable for 1 Set of 2pcs.
View detail
Fits: DUCATI PANIGALE V4 S, DUCATI PanigaleV2, DUCATI SCRAMBLER 1100, DUCATI Multistrada 1260, DUCATI PANIGALE V4, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER S
I am self-satisfied.What is the effect experience with Single Body?
After finishing the improvement of riding position and appearance customization, we started to improve the driving performance and feeling by introducing functional parts. Replacement with AELLA Axle Shaft.
At the same time, Shaft collar and this nut were also replaced. Material at a reasonable price.:Even with Titanium, there is no way to experience the effect of these parts alone. It is a world of self-satisfaction.
It is a good product to temporarily satisfy the uncontrollable greed and self-satisfaction of AELLA believers. (Laughs)
View detail
prevention of slackening
It is installed to prevent loosening.
Black is more expensive, so here is Quantity:1 Set of 3pcs. is helpful because it is less expensive.
View detail
Fits: HONDA SUPER CUB series 50-110, HONDA MONKEY series 50-110
Safe because it is dedicated
It's a dedicated part.
It is safe to tighten with regulation Torque.
It is even more reassuring to know that it is precise.
The suspension has been renewed.
View detail
Thin type
I purchased this low profile lock nut because the length of the bolt to which the Exhaust System is attached was too long for the normal thickness lock nut to fit over the Limit Screw.
Thanks to this, I was able to tighten it without any problem and I am satisfied.
View detail
Used for Screen mounting
I purchased this product to install MRAScreen on my ZX-25R.
I felt the construction was more solid than OEMWell nut.
However, Screen is stopped at 6 places, so this product is not available in Quantity:Quantity in 5pcs.:1 Set and 2 are required.
If you are interested in purchasing Well nut, please click here.
Recommended
View detail
prevention of slackening
I bought it because I thought it would prevent loosening of the Fixing Screw in the Exhaust System section, rust-resistant Stainless Steel, and Black, but although the product is good, it is expensive. View detail
Replaced with Stainless black
The rear sets are black, but the screws used are silver, which is very conspicuous, so I purchased these screws to unify all the screws used with black.
Rust-resistant Stainless Steel, Black, Quantity:The price for 1 set of 2pcs. is a little high, but it is not so expensive if you don't need to replace them often.
I am self-satisfied because it looks better with Black unified.
View detail
Screw replacement
Screw replacement to prevent loosening.
MaterialStainless Steel is rust-resistant and reasonably priced.
View detail
To new together.
I've been using this product for a while now, and I'm very happy with it. View detail