Reviews
Fits: HONDA CB400SF HYPER VTEC SpecIII, HONDA CB400SF HYPER VTEC SpecII, HONDA CB400SF HYPER VTEC Revo, HONDA CB400SF, HONDA CB400SB, HONDA CB400SB, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1100EX, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100EX BLACK STYLE, HONDA CB1100BLACK STYLE
Nice...
I replaced it with a Sintered pad because the Brake squeal would not go away and it was less expensive and seemed more durable.
The pad before replacement came with an unknown manufacturer, so there is no comparison, but it works and does not squeal as usual. 。
Control is much better than I expected, and the effectiveness changes with the amount of force.
It seems to be a bit aggressive to Rotor, which is a concern, but it was a good decision to replace it.
View detail
Fits: HARLEY-DAVIDSON FXLRS SOFTAIL LOW RIDER S, HARLEY-DAVIDSON FXLRST SOFTAIL LOW RIDER ST, HARLEY-DAVIDSON FXRST SOFTAIL LOW RIDER EL DIABLO
Pull back easily
It is just right to be able to pull back easily without changing wiring.
If this isn't enough, you could replace the Riser and raise it.
It's cheap and helpful.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR800, HONDA VTR250, HONDA RVF400, HONDA VFR750R, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB650F, HONDA CB650R
It is not a pure Black.
The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
I am satisfied with the quality function design!
I am very satisfied with the quality and functional design of the product, which also cancels out the vibration from the handlebar and ensures good rearward visibility! View detail
Fits: HONDA DAX125, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA SUPER CUB110PRO
Mounted on CROSS CUBJA60
Installed for dress-up and ease of gripping.
My hands are on the Large size, but OEM is a bit far away and my hands get tired after riding long distances, so I bought this. I am glad I replaced it.
View detail
Fits: HONDA PCX, HONDA PCX160, HONDA MSX GROM, HONDA MSX125SF, HONDA MSX125, HONDA GROM, HONDA DAX125, HONDA MONKEY125, HONDA ADV160, HONDA CT125
Purchased in conjunction with MONKEYLowdown
Purchased this product because I lowdown my MONKEY125.
The texture is great and the height is adjustable.
View detail
![Aluminum Billet/Slider for [Color] ClearClutch cover](https://img.webike-cdn.net/catalogue/images/97604/sli04-slider-for-clutch-cover-ccv401_13_1800x1800_TS.jpg)
I'm actually a Slider...
I guess the real purpose is to Slider in the event of a fall.
We purchased the Clutch cover as an anti-scratch protection for shoes on the Ring part of the Clutch cover.
So I'd like to see a product with a thinner thickness, and
I would like to see more colors, especially blue.
View detail
Just fit like OEM Product
I purchased again this time.
It is mechanical and looks great on the air-cooled CB1100. It is not accurate, but it allows you to check the degree of oil temperature rise and has the effect of preventing overheat in the summer,
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Experience the effect
It's very easy to install, but it works great.
The unstable handling that has always frustrated me.
Totally resolved!
The wide range of color variations will satisfy many people's tastes and preferences.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Good because the price is low and no need to relocate Horn.
Buy this one while you're at it for a down fender in Mukawa.
OEM HONDA Emblem was installed.
Good price and no need to relocate Horn.
Product.
However, my 2023MODELMONKEY125 is
When the Mounting Bolt of the Horn is removed, the Headlight case and the
Remove the front Light as it is stuck in contact and cannot be removed.
Furthermore, remove the three Bolt fixing points of the Light case and put the Light case.
The Bolt was shifted slightly to remove and install the Bolt.
The instruction says to remove the Light case, but remove it completely.
There was no need.
This is a standard custom for DownBracket installation.
I am glad I installed it.
View detail
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
Price suitable
The screw holes were accurate and there are no problems with installation or appearance. View detail
![Traction Pad Street Bike Kit [VOLCANO]](https://img.webike-cdn.net/catalogue/images/103505/55-10-0055C_TS.jpg)
Second purchase of this.
This is actually the second time I have purchased this.
The first one peeled off after about 3 years.
I wanted something else from Japan but couldn't find anything that fit my 2014 GSX1300R HAYABUSA, so I bought the same one.
No complaints other than adhesive life.
View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
Advantages of Maintenance
I have been using DX since its release. I don't mind maintenance, but sometimes I get tired of doing it when I'm busy with the weather, so it's nice to have less frequent replacements. Fuel consumption and running performance do not change drastically. View detail
Fits: DERBI Urban, BMW R69S, CAGIVA CUCCIORO, DERBI RD-2Country, DERBI AVENTURA, DERBI HUNTER, DERBI Variant box, DERBI Variant boxSportsR, DERBI Variant boxTop, DERBI Phoenix・FDSSUPER・StartDS, DERBI Flux, HONDA MB50, HONDA MB80, HONDA MT50, HONDA RACCOON, KAWASAKI 125TR, KAWASAKI 250TR, KAWASAKI 400SS, KAWASAKI 90S, KAWASAKI 90SS
regular product
A classic Plug for KawasakiKH, I can't think of anything else ? View detail
Fits: Others
Power supply for PanasonicGORILLA
I don't mean to brag, but Motorcycle is Polishing Specialty The length of the Chain cannot be adjusted in
The installation work was done by a Motorcycle shop that we are familiar with.
The installation fee Gold is included in the X-ADV used car delivery and maintenance fee Gold, so the details are unknown.
The USB port is designed to be waterproof, but the plug port is facing down to prevent rain.
I have only used it once, but I have a feeling that Large will be very active in the future.
The cell phone Navigation is inconvenient for some reasons, such as signal loss in mountainous areas. We do not use it because of the high communication charges.
I use a PanasonicGORILLA which I also use with my own car. (VWGolf's Navigation has little information and does not show Costco. (VWGolf's Navigation is not very informative and does not show Costco, and the other information is also very poor.)
View detail
![[Replacement/Optional Parts] USB Power Supply Repair (for 99502/93039 etc.) Cap](https://img.webike-cdn.net/catalogue/images/83647/19226_TS.jpg)
Waterproof parts should be provided by Spare.
I would like to thank you for selling this kind of small parts.
Waterproof performance degrades over time as a matter of course; if it's in Catalogue, you should buy it.
The evaluation includes imagination and expectation because the replacement work has not been done.
Of course, there is no Instruction Manual.
View detail
![ERSeriesChain 520ERVT Gold [with Clip(FJ)Joint].](https://img.webike-cdn.net/catalogue/images/63583/520ERVT_G_G_P_TS.jpg)
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, SUZUKI RM-Z450, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA AX-1, HONDA CR125, HONDA CR125
I bought it for forest road Touring.
Gold plating is beautiful. Expensive, but I expect durability. View detail
Fits: KAWASAKI KR-1/S/R, KAWASAKI KLR650, KAWASAKI KLR650, KAWASAKI KLR650, KAWASAKI KR-1/S/R, KAWASAKI KLR650, KAWASAKI KLR250, KAWASAKI EN500, KAWASAKI CS250
Might increase fuel economy?
The FSprocket has not been replaced yet and has not been run much, but it feels good.
The Meter reading was previously 4000 rpm at 60 km travel, but after the replacement, it became 3500 rpm and I was able to travel up to 6th gear without any discomfort.
Next time I will replace and adjust RSprocket and see.
View detail