Reviews
Length change
Convenient for use in secluded places.
Combined with the Compact Ratchet, it doesn't take up much space in an in-vehicle tool.
View detail
It is best to be only comforting and not to demonstrate effectiveness.
The upper body is inexpensive but wears for RiderJacket with Protector on elbows and shoulders, but the lower body is always regular Jeans.
I had fallen and scraped my knee in that Style, and I was reminded that joint areas are still dangerous.
However, I did not want to buy something that looked like a rider, so I bought this product in search of an inner type Protector.
Worn over Inner Pants (also called "Ste. Lever" or "Patch" or "Thigh Pants").
It feels good to move naturally without any particular discomfort.
And since each package contains one sheet, you will need two if you want to wear it on both knees.
I am Quantity:I mistakenly ordered it as being included in the Set and had to purchase another one later. Please be careful.
To prevent such people, the new Package that you received is not shown in the Package image on the Product Page, but it is shown in the new Package that you received. One sheet." It is clearly stated that
View detail
For servicing and maintenance use
Affordable price, so much Quantity:Set, making it convenient to use and use.
The Level is sufficient for everyday use and is fine in use.
View detail
For Maintenance
This is a purchase for use in Socket extension for use in Maintenance.
The price is not too expensive, and it is convenient to use three different lengths.
View detail
More than the price
Tools are required to be precise, and I think SK11 has a lot of good products for the price. View detail
Why didn't I buy it sooner….
I bought it for Rust and paint removal in a small space.
We are currently in the process of stripping the old paint film to re-paint the hubs of the Spoke wheel.
The paint film itself was almost completely removed using a stripper, but I still had to use a brass brush and a wire cup brush to completely remove it and to remove the White Rust, which is unique to aluminum.
However, the Wire cup brush cannot physically fit into tight spaces.
Also, a brass brush with a handle is not suitable for dong-tsuki.
I had been polishing it with water-resistance paper and other materials, but I still could not physically reach the deepest parts.
It was in this context that we came across the tubular Brass Brush.
I am really a god.
I regret why I did not buy it sooner.
It is not as detailed as the Leutor, nor as large as the Wire cup brush.
There seem to be 10mm and 15mm, so you may choose according to the target Large size.
This time we chose 10mm.
To be frank, it is just a Small Type Wire cup brush, but it is really a Recommendation.
It would also be good between the cooling fins of an air-cooled Engine or something like that.
Brass Brush is also less aggressive to aluminum and scratches moderately, making it just right as a primer for painting.
Thanks to this product, we are on the verge of Re-painting.
It is a Brass Brush, so it is by no means infinitely durable, but it did not quickly become a bald pile.
I often do this kind of work.
Since we are here, I would like to Stock each Size.
I've said it many times, but this is one that you really should have.
View detail
Dirt removal
I bought this to remove stuck-on dirt.
It is not that expensive and seems durable.
In the image, I imagined it to be a little smaller, but it was a little larger than I expected.
The Wooden Handlebar section is also easy to grip and use.
View detail
Small, Compact
I wanted a compact, small-sized product that could be used as an in-vehicle tool, so I purchased this one.
It is quite small. Large enough not to get in the way, tough to apply strong force, but usable enough.
It is a useful tool, although it is difficult to convert the tightening direction due to its small size. The selling price is a little high, though.
View detail
Easy-to-use tools
Convenient for tight spaces where a Socket wrench will not fit.
I recommend it because the quality is not bad for the low price.
View detail
Compact
I purchased the Ratchet because I thought it would be convenient and easy to use for in-vehicle use and for small occasions.
It is really small. The small size does not allow for a lot of force to be applied.
High selling price (The price is going up.) It is a pity.
View detail
products with advantages and disadvantages
This is a swiveling Type, which can be fixed, but it comes off easily.
You should also buy a regular T-type Handlebar.
View detail
Easy to put effort into.
I purchased this product to install a Hepco/Becker Engine Guard.
Since the SV650 has a frame fixed by the engine, it requires a lot of torque, so we used a long handlebar.
As a result, I was able to remove it with ease.
The length is nice and fits in the e-value Tools Set.
View detail
Necessary and sufficient performance
[How is it used?
It is useful for loosening axle shafts and steering nuts on motorcycles.
It can also be used to replace Tire on cars.
Was the one you received as per Image?
It was just as Image.
I appreciate that SK11 has a pretty good selection of products with excellent Cost performance.
There are some spec. for reduction in cost, such as no holes in the handles and no Knurl processing to prevent slipping, but I think it is sufficient.
I also use a Torque wrench to hang Torque.
How was your experience with it?
It is quite effective for Bolts and Nuts that do not loosen or have high Torque applied to them.
Basically, it is used for bolt and nut of the undercarriage that is stuck, but it is easy to work with thanks to its length.
Socket tools are mainly aligned with a 3/8 insertion angle, but for those that are unlikely to come loose, 1/2Socket is prepared in advance and used.
How did it compare to other products?
The Spinner Handlebar of this length made by other well-known manufacturers is quite pricey, so it's nice to know that it's cosmetically sound.
View detail
Convenient Socket adapter
[How is it used?
Used for tightening at 40N-m when cleaning and installing Caliper on XJR400R.
I have two Torque wrench, one for ~25N-m and the other for 40-140N-m, but one of them has a 12.7mm insertion angle. (1/2-inches) and the other is 9.5mm (3/8Inch) The Brembo caliper mount bolt is 12mm, but the 12mm socket I have is 9.5mm. (3/8Inch) So I needed a conversion and bought this one.
Was the one you received as per Image?
It was just as Image.
I think you can find them at Home center, but I'm glad to know that they are not available at small places and that it is cheaper to buy them here.
How was your experience with it?
Thanks to this, we were able to tighten it with a solid Torque.
I want to make sure that the Brake area is secure because if anything happens to the Brake area, it will be Large strange.
How did it compare to other products?
I have seen other manufacturers' products, but I think this one is the cheapest and has the best cost performance.
View detail
Special Tool in a sense
I had a slightly smaller long driver in the carburetor setting, so I used that, but it was not good enough.
(15cm for No.1Driver, 30cm for No.2Driver)
ThrowAdjust Screw (PilotAdjust Screw) I was looking for a slotted screwdriver for the head of the No.1 driver and one that is at least 20 cm long.
Then I found this product and bought it, thinking it would probably be Large sturdy since it is 25cm long.
Since we are using PWK for APE, all Adjust Screws are on the Left Side and OEMEngine Layout, but the carburetor is installed diagonally Right, so unfortunately it is shadowed by the Frame, I thought it would be better to change the way of thinking and look for a tool that can be used for a long and thin time.
Surprisingly, it was easy to use and set up, and I'm glad I was able to save more time than before.
View detail
Easy to put effort into.
I purchased this product to install a Pepco Becker Engine Guard.
Since the SV650 has a frame fixed by the engine, it requires a lot of torque, so we used a long handlebar.
As a result, we were able to remove it with ease.
The length is good.
It fits into e-value's Tools Set.
View detail
This is handy.
Mast is especially useful for Scooter and other hard-to-access structures.
Magnet does a good job.
One drawback is that Material:I had a hard time understanding the instructions on how to remove the plastic tag-like thing because the text and illustrations were too small. In fact, it was easier to replace the plug.
View detail
If you want to do your own maintenance...
I already owned SK11 Fujiwara Sangyo's digital torque wrench for 3~60Nm for Spark plug and Small size Screw, but I wanted to tighten it at 59Nm for Torque management of Axle Shaft by removing and installing Wheel, so I needed to purchase Large Range 6 I needed to purchase a 6.8~135NmDigital torque wrench.
Since the range is from 3 to 60Nm, if the value is 59Nm, the digital torque wrench that you already own would be OK, wouldn't it? However, the Torque wrench's accuracy is higher in the middle of the range, and as you go to the end of the range, the accuracy drops.
Switching from the pre-set type to the digital type requires some getting used to, as the buzzer sound and LEDMeter are used to determine when to stop.
I think the Torque numbers are correct with the inspection certificate included, so I think it is safe to use.
View detail
Well, it's not like this.
It will be smokey.
I'm going to use it after I've cleaned it out.
View detail
Mistook it for a hexagon and bought it.
[How is it used?
I bought this to loosen the Driven Sprocket on my XJR400R.
Was the one you received as per Image?
I did not read the product specs carefully and bought it thinking it was a hexagon, but it was a dodecagon.
It is not impossible to use a 12-square, but the way the Torque is applied changes from a 6-square to a 12-square, and it is difficult to use in places where considerable force is required.
How was your experience with it?
I still could not loosen the force well.
This caused a little damage to the Nut and I failed. This was my own fault, though, so I had no choice.
The product is inexpensive and easy to use.
[Points to note]
Read the product Spec. carefully!
It makes me sad when I buy tools I don't use lol.
How did it compare to other products?
I later purchased a similarly priced hexagonal VERSION.
I think the quality of this product is slightly higher.
View detail