Reviews
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
Front feels lighter!
I changed it along with the Front Disc replacement.
The weight is light, but the front tire feels lighter than expected!
The price is reasonable, so if you are not sure, try to replace it.
View detail
To the Accent around the Rear tire
This is the accent as seen from the rear view. View detail
Fits: KAWASAKI ZXR250, KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ELIMINATOR 250V, KAWASAKI ZXR250R
KLX125
KLX125
DrumstickDrumstick fits!
View detail
Fits: KAWASAKI VERSYS 650, KAWASAKI VULCAN400S, KAWASAKI VULCAN400S, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-10R, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja 650, KAWASAKI ER-6n
grunting or groaning sound
I was convinced that I could be sure of the products here. View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
I think it would have been better if it were a little thicker.
The fabric is too thin. The texture would be better if it were thicker. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
Acceleration Up
15T→14T for acceleration up.
I thought I would lose fuel economy, but it ended up being better because it was easier to get on Speed!
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUBC125
BALI shaving required
The Normal Throttle has a large pull allowance, so there were times when I had to re-grip it when running at full throttle, but this has not happened since switching to this product. However, this has not been the case since we switched to this product. Also, the Axel does not become too severe due to too high Solo, and the Throttle is now an easy-to-use Large Throttle.
When installing, there was a small BALI (less than 1mm) at the part that fits into the switch box, and when I turned the throttle, it jostled, so I had to shave the BALI and flatten it. It was not a large job, but it took a long time to install because I did not understand the cause at first. I recommend that you shave the BALI before installation.
View detail
Purchased for ignition inspection
It is very good to be able to see the ignition system of BigSingle even when starting KICK when checking the ignition system alone. View detail
The usual.
This is the Lock wire I use all the time.
I bought it because it was out of stock.
I have Sizes before and after this one, but the 0.57mm is the most versatile.
View detail
It is KITACO after all.
KITACO has a rich lineup of fine dress-up parts. I am satisfied with the quality. The instruction manual says to remove the cell motor once and to install the ball point hexagonal wrench, but I was able to install it normally. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50-PRO, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA MONKEY125, HONDA glom, HONDA SUPER CUBC125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
The look and feel changes quite a bit.
You know what I'm talking about, but install it when you change the Oil. (LOL) It looks more luxurious and better than the OEM product! View detail
Mounting is a little Large change
The work is quite large and odd, as it requires relocation of the Horn and removal of the Light, but if you have the proper tools and read the Instruction Manual carefully, you can get by with it. It looks good and was worth the trouble! View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
Design good.
The OEMExhaust System is pretty quiet, so I went with this one, which is cheaper and looks better.
Simple design in Stainless Steel is good.
Sound is quieter than I expected, although Punch is there.
I am glad I bought it because it is quiet and I don't have to worry about my neighbors.
View detail
Unexpectedly good
The HRCGROMCUP Regulation has given us the OK to start this year.
Purchased
I've been replacing Spring for a while now, so I'm just going to get cracking.
I was able to install it.
If you are doing this for the first time, you will need a Spring replacement tool.
It is good to be able to start from Initial 0. It is good to be able to change Initial by Course, Temperature and Condition.
View detail
KITACO suspension tool for the Honda MSX/Monkey
These KITACO Fork Thrust Adjustment Gauge Set are extremely useful in assisting you on setting the exact same height on both fork legs. They have 8 different height settings and are made of stainless steel which means they wont rust. Only improvement is that they could come with a ring to attach the two together, but you can easily add one. Overall it's a quality little tool from Kitaco! View detail
Fits: HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA HRC Grom, HONDA HRC Grom, HONDA NSR50, HONDA NSR80, HONDA NSF100, KAWASAKI Z125 PRO
Can also be used with Hollow Axle Shaft.
The name is "Axle Protector", but I installed it as a stress-up part because I thought there was not enough red around the front tire rather than to reduce the damage of the vehicle at the time of a fall. I already had an experience that I had a hard time to put in the Shaft when I removed the front tire by replacing it with KITACO's Hollow Axle Shaft, so this time I used DAYTONA's Maintenance Stand for Front. I was able to insert and remove the shaft easily because the vehicle weight was not applied. I think it is difficult to install by DIY because the fork hole, collar, and wheel are not aligned unless I lift up the maintenance stand or the handlebar, etc. I am satisfied with the red accents around the front tires, which are mostly black parts. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Ideal for Attachment power supply extraction
Ideal for taking out Attachment power supply
DL1000 V-STROM250SX is designed to be easily inserted into a connector of the same shape by removing the cover under the tandem seat to reveal the connectors.
I think this is a good product because power can be removed without damaging the Wiring.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
C125 is the best choice
I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and the brand Kitako was trustworthy.
You won't feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. -------------------------------------------------- -------- I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and I trusted the brand Kitako. You may not feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. Powered by Google Translator
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA SUPER CUB 50-PRO
Cheap but good product
I purchased it as a replacement for the original C125. Not only was there not much difference from the original price, but Kitako is a trustworthy brand, so I chose it without hesitation.
The product reviews were good, so I ordered it without even thinking about it. Now the C125 is for life. -------------------------------------------------- -------- I purchased it as a replacement for the original C125. Not only was there not much difference from the original price, but Kitako is a trustworthy brand, so I chose it without hesitation. The product reviews were good, so I ordered it without even thinking about it. Now the C125 is for life. Powered by Google Translator
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Kitako Power Extraction Series!
Is it for SEA BASS/Yamaha?
I purchased this for my VSTROM250SX.
If you look for a lump at the bottom of the Rear Sets, you will find a Connector, which you simply remove and insert this Adapter between the Rear Sets.
It is very easy Exclusive Design!
View detail