Reviews
Only one of them.
I bought this Coupler with the intention of using it to repair the Meter area, but I didn't need to replace the Coupler, so it was in my inventory. The other day, the Blinker stopped working and the Blinker relay needed to be replaced, so this Coupler came into play.
The posh Blinker relay that was broken had a wire and Coupler so I just had to connect it to the Coupler on the car body side, but this time I had to use a cheap Blinker relay that needed to make a Wiring to install. Since the Blinker relay to be used is the one of 2 tracks, I relied on the Blinker relay made by posh which was broken, and used the Female side of Coupler and the line Quantity of 0.75:2pc、Plain Type TerminalQuantity:2pc. When I made Wiring with Set and connected it, Blinker came to work normally. This time, because I used a cheap blinker relay, I made the wiring longer and moved it to the position where I can replace the blinker relay without removing the tail cowl when it breaks.
As for the Coupler, the terminal was firm, and the connection with the Coupler of the car body side was also smooth and there was no problem. I don't know if I'll have to use it this time, because I only used the Female side, but I'll keep the Male side in the bag. There was no extra terminal in this Coupler set. I would be grateful if you could include a spare one pc at a time, as sometimes amateur work can go wrong.
View detail
TO SWAP MY CUB 50 TO 100engine
ENG: i have 100cc korean engine and i need change some few cables from engine 5 cables but this engine so old condition and i must replace connceter so i choose this and it fit perfect little bit small but if you change male - female connecter both it will be fine and easy old korea enigne has 5 cable ( N , 4th ) and original cub 50 has 3th gear so only has N sensor Once connected, green-yellow-white-blue-black-green-red View detail
For Blinker repair.
I used it on a non-posh product, so I had to modify it, but it worked fine. View detail
The price is cheap.
The price is cheap, so I bought it for Spare of Wiring.
The price is cheap and you can order from 1pc.
The listing photo and description are Gold, though.
I'll give it up because it's cheap, but I wanted the Gold color.
View detail
Power supply
It is a purchase as a Connector for the power distribution from the Meter part.
The shop in my neighborhood didn't have 9PType in stock.:Set had the lowest sale price on this product, which is a big help.
View detail
Wiring, Re-Crimping
Wiring (Disconnection) It is old and I bought it for re-assembly. The price is reasonable and good. I thought this was the one I wanted because it was Gold in the picture. When I received it and saw it, it was a silver one.
It's inexpensive, crimpy, and if it connects properly, there's no problem.
View detail
Looks like a Large thing.
Style maintenance OK with Repair Parts. View detail
Also for OEMHarnessRepair
If you want to do WiringCustom such as Blinker, this is the one to choose.
Even Other Brand Products with Bullet Type Terminal can be SMARTly connected to OEMHarness for older vehicles with this.
It is possible to make a reliable connection and make Wiring easy to understand for anyone to see.
In my case, because the nail of the Connector of OEMHarness was broken, and it came to come off when a little force was applied, I pulled out the terminal this time, and used only the attachment of One Side of Connector.
Now I can run with peace of mind. It's a small thing, but I hope they keep selling it.
View detail
The Same Shape as OEM
I bought this one to use for my Side Stand Can Engine Starter Motor, I was looking for the same color as the OEM but couldn't find it and it looks like they don't have it, so I bought this one with the same shape.
The shape and so on are the same as OEM, so it is not a problem, but Male, Female, Tweezers, but the selling price is reasonable.
View detail
The Position is on.
I added the position function when I replaced it with the Blinker of the traditional small type. With a little modification, it can be easily seen from other cars. View detail
For taking out the power supply of MT-07
Used to take out the power supply that is prepared for the Option of the MT-07.
For MT-07, 12V is prepared under the tank with this Connector.
The TAB and receptacle are both needed to get the power out of here, so this product was Exactly what I was looking for.
The downside is that it's a bit expensive.
Yamaha has an OEM set up Harness for power extraction and it's about $1,000.
I think it is reasonable to buy OEMHarness considering the work time.
View detail
All this stuff.
I used to use it on my NSR250, but since I changed the installation location, I couldn't reach the length, so I bought it!
It's nice to know that you can even buy Single Items like this!
View detail
For the production of the Connector for the Blinker relay of Honda vehicles
Purchased to replace the Blinker relay on my '14 MC41 CBR250R with Other Brand Product's 3-poleICRelay.
OEMHarness's Relay attachment is a 110-inch 9-pole MaleConnector (Female in terms of terminals) So, FemaleConnector of this product (Male in terms of terminals) It fits perfectly in the
The mating is Exactly and the terminals go into each other properly, so I think the quality is Large strange good.
In case you're interested, here's a picture of Wiring when using 3-poleRelay with MC41.
I'm grateful for the Large variant, even if it's a little more expensive to sell one at a time with these ConnectorSingle Body.
Electric Works Pliers are required for installation.
View detail
We even have these at Repair Parts!
I bought this for my NSR because I put a Watani on it, but I couldn't reach it after I moved the mounting location. View detail
DAYTONA BLINKER CONNEKTOR
I bought myself a used Suzuki GSF 600S Bandit motorcycle. After the purchase, after some time, the direction indicator stopped working. After diagnostics, it turned out that someone had torn out the connector on the right turn indicator. I had to order a new connector from Daytona. This is a great connector. It installs quickly and easily. It looks like the original one. I recommend this product. View detail
For H4 conversion of Yamaha old car.
I think it's a very standard H4 Connector.
I think it's a must-have, especially for Yamaha's old car riders, because it's something that will be H4 standardized.
I have purchased 2 of them.
The video is a driving movie converted from Projector to H4.
View detail
very useful
My car is KAWASAKI’s NINJA 400, model year 2019. In order to connect the turn signal, I bought this product from AMON. It should be noted that it is not waterproof, and it is completely fine to put it under the rear seat. It has been used for more than 1 year without any failure. ---------------------------------------------- My car is 400 , the 2019 models of KAWASAKI NINJA. After receiving the order to turn lights, AMON buy this product. It should be noted that it is not waterproof, and put him in the rear seat following no problems. Spent more than a year have not been any failures. Powered by Google Translator View detail
Fits: HONDA MONKEY
For use with the 6V MONKEY/GORILLA Main Harness for Replace.
I bought it in order to divert 6V MONKEY/GORILLA Main Harness (for 6V early stage) for Replace made by the company to my car (6V late stage:car with Regulator). In order to use their 6V MONKEY/GORILLA Main Harness, you need 4-pole coupler to connect Harness side 4-pole coupler to Battery separately. However, the Coupler on 6V MONKEY/GORILLA Main Harness side is 110 type 4-polewith Lock, so you can use 110 type 4-polewith Lock Coupler instead of this Coupler. View detail
You can use it to add a round tail to a CUB
I bought it to replace the CUB tail lamp with KIJIMA round tail.
If you use this, it seems to be able to convert in the vicinity of the tail lamp without having to change from Wiring in the Center section of the vehicle body, which is a hassle.
However, I ended up changing Harness to with Round Tail Light genus, so I didn't use it …… I didn't use it.
It looks and feels like a normal Connector set, and since it's DAYTONA, the quality should be fine. So I have high hopes for it, 5 stars!
View detail
conversion
I used the Clutch master on the ZZr1100 to draw it so.
Thank you for the easy conversion, I was able to install it on SMART.
View detail