Reviews
If it is Shinobu Sen, Limit
I use it in Shinobu Sen.
To go up, it will go up.
However, with the two Bolts that come with it, it seems scary.
I added one of my own and made it three.
After that, the Frame lock starts to work just before it goes all the way up and stops.
In this state, if you loosen the Brake slightly, it will raise completely.
But I think U-type Clamp is easy.
View detail
Used for RM125
I use it to Lift up my RM125.
I thought that the Rail type would be too tight for the Racer's ride height, so I decided to go with this one.
Surprisingly, however, the height was just a little above the lower limit of the adjustment range and just below the belly.
It seemed that even the Girito Rail type could be lifted up.
View detail
For domestic cars, the included color is sufficient.
If it is to be used on a domestic car, I think the included colors will cover it.
There is a Bolt for fixing on the STAND side, but there is no Screw hole on the Adapter, so it is easy to come off.
View detail
For forest road
We chose it for Puncture repair on forest roads.
Lightweight Compact is good.
View detail
Cospar good
I have wanted a Front stand for a long time, but was hesitant because of the high price. I have been using it on my 2021 MT09 SP. There is a slight interference with the bracket of the Horn. Also, it is necessary to pull the harness closer when lifting it up. However, it can be used because it is at a level that can be counteracted. Be sure to raise the Front after raising the Rear. This is a satisfactory product with good usability. View detail
It's the worst
It is listed as Z1000 air cooled, but it was for a water cooled z1000. The description is incorrect. I have sent numerous emails to point out the error and return the product, but they have completely ignored me. They claim to offer a warranty for the model of the car, but even though they themselves are in error, they offer no warranty and cannot even be contacted. This company is a scam. Please be very careful. Rumor has it that they also sell counterfeit parts. View detail
For maintenance.
[How is it used?
I read it before playing with Motorcycle or in my spare time.
Was the one you received as per Image?
Yes
How was your experience with it?
I only tinker with it in a SunMachine way, but it's fun just to read about it.
[Points to note]
It is thick and heavy, so it may not be suitable for working outdoors while viewing.
How did it compare to other products?
In addition to photographs, CG images are also used for easy Image.
A little cheaper would be nice
View detail
Easy maintenance
[How is it used?
Used during ChainMaintenance of CB1000R.
Was the one you received as per Image?
As per Image.
How was your experience with it?
The construction is solid and there is no worry about it breaking.
For this price, I am satisfied.
[Points to note]
Locking the Brake of Fr is a must.
If you turn the rear tire without brake, it will be wobbly.
Also, the Rear tire needs to be turned firmly with both hands.
*One hand Slurp." Maybe it's because it's a Large Motorcycle, but...,
How did it compare to other products?
Unknown, as I have never compared them.
Other items that would be helpful
Can be used immediately after opening.
No need to reassemble the Roller to match the Tire size.
View detail
Easy Lift up
I had a hard time deciding between this and Jack's, but I chose this one because of its light weight.
Narrow type STAND is a little unstable, but it is stable when lifting the front.
When lifting both wheels or only the rear wheel, it is recommended to fix the Front with chocks.
This was the right choice for ease of lift up and portability.
View detail
Recommended!
Intake sound was improved and acceleration was increased!
It's expensive but … recommended!
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
MONKEY125 beware.
Purchased for maintenance of MONKEY125, such as oil replacement.
Be careful when lowering.
If you lower it too vigorously, your hand may get caught between the Arm of STAND and the License Plate.
Hands get caught, License Plate gets bent….
but with great strength and stability.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
STAND for liter machine with excellent cost performance
It's like a CB1300SF exclusive.
Since it is a collective pipe, there is no Center Stand.
It is very useful.
View detail
Questionable quality inspection of products
I received it ahead of schedule, but when I was setting it up for installation to fit my Motorcycle's size,
The Clamp's corner Pipe was not penetrating the ArmHolder's insertion hole (One Side).
I had no choice but to use a slotted screwdriver as a chisel to remove the BALI.
DAYTONA, please inspect your products carefully.
View detail
How about one for Garage?
I purchased this product for the first time for Chain Maintenance.
I was nervous when I put it up for the first time, but Quantity was there without a hitch!:Set is ready.
It is so convenient that I wish I had introduced it sooner.
I am satisfied with the quality of the product, but I have one point,
The hook part was bare gold and it looked like it might scratch the Swing Arm,
I covered it with Fuel Hose, which happened to be available.
Other companies' MAJOR products have already taken countermeasures in this area, so please check this when purchasing.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
It is like for CB1300SF to begin with.
It is a 1300 Sioux Four without a Center Stand because of the assembly pipe. I was worried about maintenance because it is very heavy and there are many stories about it falling down and breaking a bone. I have heard many stories about people breaking their bones when they fall over because they are so heavy, so I have been concerned about this for a long time. I would like to use Large stand. View detail
![Service Manual [General Version]](https://img.webike-cdn.net/catalogue/images/111384/service_manual_yamaha_TS.jpg)
Necessity of maintenance
[How is it used?
I purchased this to recover and Restore a YAMAHA TZr50R from a Scrap shop.
I am thankful that YAMAHA publishes the Parts List on the Net, so I only need to purchase the Manual.
Was the one you received as per Image?
It was just as the Image said it would be. Without this book, I can't do detailed maintenance etc., so it's a necessity.
How was your experience with it?
I have another service manual for XJR400R, but this manual has more detailed explanations with pictures because of the different era.
[Points to note]
You can look for used products to purchase as they seem to be discontinued now, but be careful when purchasing as some of them do not contain all the information called Supplement.
View detail
Great Looking & Practicable Spool for Stands
I was very impressed by the quality, I thought for the price the metal quality would be ok, but it's very good. I install it on my new +5 swingarm on my monkey and it fits nice and tight. Highly recommended, will make life much easier with a stand. View detail
good
My car is Hayabusa Suzuki The existing short clamp is dangerous because the car is heavy, but after changing to a non-gyner product, it is possible to stand stably View detail
RearMaintenance
I have been using JTrip's STAND for a long time and have two types of Hooks. Now that I have a new hook on my car Both Sides, I needed a hook on the STAND side to match the new hook, and I thought the Rubber hook I purchased this time would be suitable for that. I have actually used the Rubber hook and it was a good decision because I only need about half the force I used to use. Another good point is that it does not get scratched. View detail
I'm not sure when it was lost.
I bought it because one of the four was gone and the other was cracking.
It explains that double-sided tape makes it harder to remove.
If so, I wish they would put it on from the beginning.
It was a hassle to put it on, so I used Vinyl Tape to prevent it from coming off.
View detail