Reviews
A bit expensive but high quality! Be safe!
I have experienced an accident with a child, so I put this product on my Rear Bag for safety first!
I feel that the number of times I have been forced to close the distance between cars has decreased since I completed the application! Safety first! I will be an active Rider for life! This is a recommendation!
View detail
My savior who mistakenly cut off CUB's Wiring
I bought it because I had mistakenly shibered CUB's RegulatorWiring.
The shape is exactly the same as the Coupler of the C50OEMRegulator.
However, please note that the OEM is like a double cord, so the attached terminals cannot be used.
View detail
If you're willing to rip it off, be careful.
Items convenient for products that also have a protector, so even if they are attached to protect scratches, they look like they are attached to improve visibility.
However, when peeled off, it left a mark and was a type of adhesive that was difficult to remove even with Seal peel, so I recommend using another double-sided tapeetc. if you are thinking of peeling it off.
View detail
Thick enough! Reflects well too!
We were looking for a reflective Sticker to improve safety. At first, we were looking for a reflective Sticker sold at a hundred-yen store.
I was dissatisfied with the adhesive strength and stuck this product on it.
I am satisfied with the results! When degreased properly, it does not peel off even if it rains, and it reflects the light of following cars perfectly.
It contributes to safety improvement! It is easy to apply, so it is a recommendation for everyone!
View detail
Light and affordable Large size
It is light, reasonably sized and inexpensive, so it is very useful. View detail
Changed to new Package. No stickiness!
I bought this product for a friend of mine because the Vinyl Tape I had been using at the 100 yen store was sticky, so I used it for the wiring process on my Motorcycle Navigation! It's sticky but not sticky! It's easy to cut with scissors!
This is a product I will continue to use for years to come!
View detail
Required for Coupler processing in Blinkeretc.
[How is it used?
I purchased this product because I wanted to use the same terminal as the OEMCoupler instead of the Bullet Type Terminal connection when attaching an external Blinker.
How was your experience with it?
It works fine. If it were a little more expensive, the feel would be better, but for this price range, I have no complaints.
The BlinkerCoupler for Kawasaki cars is essential, as it can only be fully crimped with Electric Works Pliers for fine wire.
[Points to note]
0.This is for 3sq or smaller only. Please be careful not to use it for other standard items as it may lead to wire breakage or damage to the tool.
How did it compare to other products?
It's neither too good nor too bad. It is inexpensive and easy to buy.
View detail
Amount of cotton, good.
The amount of cotton is appropriate and the texture is nice. about 2 liters of waste oil and it still seems to absorb it. View detail
Finally, it's time to go.
I purchased and installed a Push Type Switch to use as a switch for the power supply of the car navigation system, but the other day, when driving on a mountain pass with somewhat rough pavement, a malfunction occurred due to vibration, causing the power supply to turn off and on, and temporarily Navigation repeatedly started up and stopped functioning.
This symptom did not occur during normal city driving or on well-paved roads, even on mountain passes, so I think that the problem may have been caused by severe vibrations that exceeded the manufacturer's expectations. I think that the previous Push Type Switch may not be good at strong vibrations. I don't want to continue to use the switch in this situation and have navigation problems, so I decided to replace it with a toggle switch that I have and see how it goes.
I bought this toggle switch but never had a chance to use it, so it has been sitting in my inventory for a long time. I haven't tried it in a place where it would vibrate yet, so I don't know how it would work in a similar situation, but I like the way it looks, so I'm glad it works.
It is not waterproof, but since we basically don't ride in the rain and it is installed in a Cowl, it is probably Large sturdy. I have applied waterproof treatment to the terminal part.
View detail
Motorcycle Wiring Essentials
This is a must-have item when placing a Relay on the Seat and extending the wiring from under the tank, through the Engine sturdy, to the Handlebar on the Front. It protects the wiring from rain and heat and prevents unnecessary troubles. View detail
It was easy to use.
I purchased this product to use as a power switch for my car navigation system, and although it is not waterproof, it has performed its function with no problems caused by a little rain.
However, during a recent touring trip on a mountain pass with somewhat rough pavement, a malfunction occurred that appeared to be caused by vibration, resulting in a situation where the power was turned off and on, and Navigation temporarily stopped functioning after repeated startups.
Since this symptom did not occur during normal city driving or on roads with good pavement, even on mountain passes, we believe that this event was caused by severe vibration due to rough pavement. We believe that the problem is not a defect in this product, but rather that this type of switch is not good with severe vibrations, and that the cause of the problem this time was severe vibrations that exceeded the manufacturer's expectations.
I am thinking of replacing the navigation switch with a toggle switch that is in stock and see how it goes. I am thinking of replacing the Navigation switch with a Toggle switch that is in stock and see how it goes.
It's a shame because it felt good to use, but I think I will keep this Switch until I can find somewhere where I can use it.
View detail
It's safe to use
We have just purchased Male and Female at the same time, as the stock of Bullet Terminal was running low, in order to review the Wiring of the Motorcycle's retrofit electrical components.
I try to stockpile these frequently-used materials in large quantities because I don't like to be interrupted when I run out of materials during a job.
Some of the No Brand products were shoddy, but I can buy Emon products with confidence. There were no defective products this time either.
View detail
We are running low on inventory.
This is a necessity when playing with Motorcycle and car electrical components. I recently purchased this Bullet Terminal because the stock of Bullet Terminals was running low when I was reviewing the wiring for my Motorcycle's retrofit electrical components.
I don't like to have to stop working when I run out of materials, so I try to stock up on materials that I use frequently, so when I buy Large quantities, I buy these quantities. In this case, I purchased both Male and Female at the same time.
Some of the No Brand products were inferior, but I can buy Emon products with confidence. This time, too, there were no defective products among the 100 items.
View detail
Convenient for changing oil and for storing parts.
I use it when changing Oil. I bought one and it was so good that I added another one. Other than that, I use it as a container for changing parts. It is good that they are usually stacked and do not get in the way.
It is not a product with special features, but it is sufficient for me. The price and the fact that it is in Japan is also a plus.
View detail
Emon for peace of mind
I bought it because I want to stop Bullet TerminalWiring for good.
Various Wiring teasers are Quantity:It might be better to buy a Set, but I think buying Rose is a better deal at the moment because you end up with a surplus.
View detail
It is useful because the height can be adjusted!
I used it to change the Oil on my CBR250RR.
I think it would be easier to replace the oil if I remove the under cowl, but it is more troublesome to remove the cowl, so I always replace the oil without removing the cowl!
The type of littering pack I used to use in Corrugated Cardboard had a hard time fitting under the Under Cowl, but Emon's littering pack can be used by folding the end of the paper bag to the desired height, making it easy to finish changing the oil! When it comes time to throw it away, it can be squashed down to the smallest size possible, so it doesn't take up much space until it's ready to be thrown away.
However, it would be more convenient if it contained a Tape or something to hold the paper bag for disposal.
View detail
super strength
It is used on the back side of Magic tape for fixing electrical components because it is super strong.
The adhesion seems to be strong to some extent, so will it come off? We will see what happens.
View detail
Fixed
Used to secure electrical components.
Stain removal, wipe clean, etc., and use with a little heat and fixation seems to be better for adhesion.
It is super strong and vibration absorption is as good as it gets, but we will have to wait and see how durable it is for a while.
View detail
This is easy to use!
I used it for a simple DIY project (Motorcycle Wiring work) and it is easy to use!
The price is reasonable and I think it is a great Entry model!
View detail
The Compact is useful for garbage disposal!
I use EmonLittering pack to accompany me when I change Oil!
It is very useful to be able to compactly organize the garbages when putting them out!
View detail