Reviews
Up in looks and workability!
Installation is easy, just replace the Nut with the Rear Suspension Nut, so anyone can do it. 。 Not only will it look better, but it will also make it easier to use the maintenance stand and improve the workability. The price is also Reasonable and the cost is also good. I recommend it! View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125
Not on the 2020 gsx-r125
When I took it to a motorcycle shop, they couldn't install it because the shape of the clutch lever was wrong. If I had known that before I bought it, I wouldn't have bought it because it's not cheap. View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
I can recommend this product as a fairly satisfactory one.
The short lever was a bit confusing at first, but after a few miles of riding, I got used to it and it felt more like a part of the motorcycle. It was. View detail
Fits: YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155
I think it's good
I wanted the Parking brake feature and saw it in Webike's newsletter, so I bought it.
The installation manual was easy to read and it didn't take too long to install.
After installation, there is no dragging of the brake and the stop-lamp is not left on, and the accuracy is good.
The rest is up to you to ride.
View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
Parenthesis good and lightweight.
Parenthesis good and looks tight.
The pattern of the place where you put your feet is a little difficult to remove dirt.
It would be best if it came with a replacement Split Pin.
View detail
Fits: YAMAHA MT-07, YAMAHA XSR700
Installation instruction error
Product came very well packaged and looks good. When removing the bottom bolt for the generator side cover engine oil flowed out which can be expected to happen, be ready for this. Also the bolt removal indicated for the water pump is wrong as shown in the photo, the bottom left is a short bolt. You need to remove the bottom right one which is the long bolt. Realized this when I tried to screw in the bolt to the bottom left hole and this compressed the pump and coolant started to leak out. On the whole I am happy with the look and feel. View detail
Looks good, strength might be a bit of a concern.
Normally, Axle Slider is attached with a penetrating Axle Shaft, but this Axle Slider has no Axle Shaft, and one side is installed with Included Parts:(like Universal Bar End) and the other side is installed with Axle It is a form of co-tightening with the Nut in it.
The shape is very good and it's pretty good for DressParts.
Installation is easy
The tools used are Hexagonal wrench and Torque wrench (for 100 N.m.)
Because I have never rolled, I do not know the performance at present, but I do not think that Axle does not shave Large.
However, the Right Side (Nut co-tightening side) has a thin body for the convenience of putting the Nut in, and when strong loads are applied, there is a possibility that it will be crushed.
However, when the Axle has fallen to the extent that this place is scraped, I think the time that Axle touches the ground is short, so I think it is Large sturdy as long as Nut is protected.
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB250R, HONDA CB300R
Reliable equipment
Compared to other products, it is easy to install, inexpensive and of good quality.
Removed insect carcasses, etc. during installation, repairing crushed fins, etc. as part of maintenance. It would be helpful to reduce these tasks in the future.
If the color of the product is Black and there is no problem in appearance, we recommend it.
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB250R, HONDA CB300R
cost effective
It's cheaper than other companies and black is hard to find, so I chose this product. There is no problem with the installation accuracy. I didn't use Washer like the Cushion material that was enclosed. I didn't use Washer like the Cushion material that was enclosed. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000R, KAWASAKI NINJA1000 (Z1000SX)
Enjoy the fashionable changes of Protector
When I was looking for a Protection Cover for Engine Case, I found a RIDEA product that has a good look, texture and evaluation.
But unfortunately, there was no fit for the New Model Ninja1000SX, Orz.
Anyway, compared with the image of the side cowl of 2017MODEL, the Engine Cover looks impossible, but the Clutch cover looks good. I popped in like a kind of about-people pillar.
The product looks like it's made of reinforced fiber plastic and has a thicker wall, so it's quite rigid.
Because it is a Protector, it's more strength than stiffness, but I don't know if it's the only one I need to try. LOL!
The texture also looks a bit off in color in the attached image, but it is actually more black and looks good. The only thing that remains to be seen is how much the color will degrade under sunlight in the process of using it.
I wish it wouldn't turn completely white in about 3 years, though.
The installation is almost perfect and Smooth than I expected.
I think that the accuracy of the part is high because it is a part that cannot remove a large amount of clearance due to its nature.
The power of the recent made in Taiwan products can't be underestimated.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 To Racer
It makes you feel special.
The OEM also comes with an engine cover, but I installed it as a dress-up.
After all, if it's made by ThirdParty, it makes you feel special.
EngineQuantity in the OEM state:Pair (for Left and Right) It's very easy to install as all you have to do is remove the cover from the car and replace it with this one.
My one regret is that the surface is dull and uneven.
At first I thought it was plastic powder from the creation, but wiping it down with Parts cleaner didn't help.
The shape is good and I am happy with it.
View detail
Fits: HONDA CB1000R
Reasonably Guard
It was easy to install with the Bolts of Included Parts:as described.
It was recommended to be re-tightened after 100k miles, but after 300k miles, Wobble is not loose.
I'm concerned about the slight gap between the Engine and Cover.
It looks and feels like it's made of cheap plastic, but the body is so sturdy that it can be squeezed with both hands without distortion.
View detail
Frame cap.
In fact, what is Frame cap?
Protection of the Bolt part of the Frame.
Accent on the tasteless Frame part.
At any rate, these are the Parts that are going to be bonsai-ized.
It's well made and Red's Anodized is good.
It may be a good part with or without it, but I added it to Accent around Engine.
However, the price of over $10,000 is something to think about.
View detail
I don't know how to install it in the first place.
There is no Installation Manual for installation, and the length of the screw that comes with the product I think the Items that are originally Base are needed because they are shorter than the thickness of the Body.
I wanted an instruction manual, even the English version.
View detail
Not available
Because the processing dimensions are wrong, the part of the Left Side is lifted up to the Frame Shall
I had to bite the Screw to keep it firmly in place, so I had to bite the Washer
Crack enters the base of the Right Side after less than 1,000 km of driving I almost dropped the SliderBody while driving
This is a flawed product that only looks good
View detail
That's good, about half the price of other companies' products
If you search on the Net, it's about half the price of other companies' products
You may have different tastes in shape, but the texture is quite good
I think the cost is better than buying more STAND
The higher the position, the less lift is required
I was wondering if I should buy a STAND for my mini bike, but I didn't need one It's very easy to install, so it's not necessary to buy a stand for my bike But I'm leaving it on because it has a good reputation around it
View detail
Cost performance?
I think the original Stand End part is also quite wide, but I bought it for more stability I did
As a manufacturer in Taiwan, I was a little anxious, but it was not that complicated It's not Parts, so I was able to put it on quickly and easily
It is important to note that the body is aluminum and the attached Bolt is also It's aluminum, so if you tighten it too much, it will break in a flash
The red color is also a nice touch
But is it still too expensive? I think so
View detail
Fits: YAMAHA FJR1300, YAMAHA FZ1FAZER, YAMAHA FZ6R, YAMAHA FZ6FAZER, YAMAHA FZ8, YAMAHA MT-07, YAMAHA MT-09, YAMAHA XJ6DIVERSION
Stable Lidea
Lidea's short lever, which is also installed in Grom, is foldable A bit pricey But I always put my finger on Quantity:It's very comfortable to drive with 2pc. The non-slip process is also very comfortable and less tiring Outstanding View detail
Satisfied (Lol)
For this price, you can't complain about this accuracy, build and quality!
At first I had to look around quite a bit to find this product But I'm glad I didn't buy expensive products from other companies (Lol)
Cost performance by quality/price is very high!
View detail
Good in cost, good in design, poor in function
Cost and design are good, but when you try to install it, you'll see that the tip of the STAND is It got stuck and the tip bolt of the Stand End could not be attached As a result, it is fixed hard with two rear bolts It is running in the state of worrying that it will fall off at any moment
View detail