Reviews
Fits: HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX, HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX
Good quality and fast delivery
good quality product and fine paintings. I recommend positively the preparation of the shipment was very fast, as was the shipment with the courier. View detail
Was it haGap?
I bought it because it was cheaper than Screen made by another company.
Because the Screen was physically longer than the OEM, it had a reasonable wind protection effect...but it was difficult to install because of the ha-gap.
There is a hole for bolt to install the screen, but whether the molding of the screen is bad or the drilling position is bad, the screen was slightly out of alignment with the car body and could not be fixed as it was.
In my case, I had a Leutor, so I was able to widen the hole and install it safely, but it may not be suitable for those who do not have access to such means.
The product itself is cosmetic, but ...
View detail
Fits: YAMAHA XJR400S 4HM, YAMAHA XJR400RII 4HM, YAMAHA XJR400R 4HM, YAMAHA XJR400 4HM, YAMAHA DIVERSION600 [DIVERSION]., YAMAHA TZR250RS 3XV, YAMAHA TZR250R 3XV, YAMAHA TZR250R 3XV, YAMAHA TZR250 3MA, YAMAHA TZR250 1KT-2XT, YAMAHA TZR125R 4DL, YAMAHA TZR125 3PA, YAMAHA TZR125 2RM, YAMAHA TZR125 2RL, YAMAHA TZ250, YAMAHA TZ125, YAMAHA TDR250 3CL 3CK, YAMAHA SRX600 1JK, YAMAHA SRX400 3VN, YAMAHA R1-Z 3XC
It's a great cosmetic
Used for FZr250R.
I don't like Rear brake that works too well, so I chose this product because the expensive ones don't feel right and are too expensive.
At this price, I can replace it frequently, and I am satisfied that it works just as well as I had imagined.
I don't know yet about durability, but I think it will work without any problems as far as quality.
View detail
Slip it on.
A little larger-than-wear is the recommendation.
The fabric is thicker and has a rubber bottom.
Boots did not get wet in the Large rain.
I am glad I bought ??? at this price.
View detail
Connected to iPhone and in operation.
Even though this device cannot communicate with each other, it was purchased to operate with Mobile phone radio wave communication using LINE, etc.
Satisfied with the operation as expected.
Bluetooth connection with the iPhone worked fine.
Although the sound quality and volume are somewhat unsatisfactory, we are convinced that they are adequate considering the price.
After all, it is less than one-tenth the price of a full-fledged Income, so there are no complaints.
In the case of Jet helmets, you will want to take measures such as shielding to prevent wind noise from being picked up.
View detail
Only looks ideal…
The OEM Mirror for the SV650X was not a good fit as it is common with other models. I was looking for a Mirror that would look good and be easy to read, and I found this Mirror.
The price is very low compared to Tanax, so I bought it to try it out as well.
When installed, it was Overtorque-like and turned immediately after being tightened and secured.
The build quality is pricey and cheap to pick up and look at, even worse than OEMMirror on a moped.
It's a shame because the design is good.
View detail
Cospa is nice.
[How is it used?
Used for HORNET 900.
Was the installation difficult?
If you can replace the Pipe Handlebar, you can do it.
How was your experience with it?
I like the flexibility of the Position.
Aperture angle, height, and width can be adjusted.
The texture is very high.
View detail
Is the Brush part this hard?
I felt the work was fast because I could brush from three directions.
The details are scrubbed with used tooth Brush.
I think I will repurchase because it is convenient for shortening time and the Gold amount is less than 1,000 yen.
View detail
Fits: YAMAHA MAJESTY250 [Majesty]., YAMAHA grandmajesty250 [grandmajesty]., YAMAHA MAXAM [Magzam] (SG17J), YAMAHA MAJESTY250 [Majesty] (SG20J), YAMAHA MAXAM [Magzam] (SG20J), YAMAHA MAXAM [Magzam] (SG17J), YAMAHA MAJESTY250 [Majesty] (SG20J), YAMAHA MAXAM [Magzam] (SG20J)
Looks good!
[How is it used?
BALI was shaved and gutted with Double-sided Tape!
Was the one you received as per Image?
Yes, sir!
Was the installation difficult?
It was very easy!
How was your experience with it?
Once installed, it's very vibrant looking!
[Included Parts:were they on?
Other sites said it came with double-sided tape, but the one I bought didn't!
[Was there anything that disappointed you?
It's not quite right and a little off!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Convenient
It is useful and used for maintenance such as chain cleaning.
It is safe to lock the front brake lever when the rear tire is lifted up.
It is also effective in preventing tipping over when parking.
View detail
Fits: HONDA FORZA (MF08) Z, HONDA FORZA (MF08) X
For dress-up of FORZA (MF08)
[How is it used?
Dress-up
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy
How was your experience with it?
Looks beautiful.
Of course, it doesn't change the way it runs.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
Nothing.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
As stated in the product description, there is no Instruction Manual and no warranty.
That's why it's cheaper.
For the price, I have no complaints about the dress-up capability.
Plating is maintained in a Large size.
We will strive to maintain this brilliance.
View detail
Fits: HONDA FORZA (MF08) Z, HONDA FORZA (MF08) X
MF08FORZA for Dress-up
[How is it used?
Dress-up
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy
How was your experience with it?
Looks beautiful.
Of course, it doesn't change the way it runs.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
Nothing.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
As stated in the product description, there is no Instruction Manual and no warranty.
That's why it's cheaper.
For the price, I have no complaints about the dress-up capability.
Plating is maintained in a Large size.
We will strive to maintain this brilliance.
View detail
VINO to Bar end mirror
VINO (AY-02) I was not sure which Bar End to choose, but I decided to go with the Bar End mirror and bought this product.
When I tried to install it as soon as it arrived, I found that the Bolt that came with it was not long enough, so I procured a longer Bolt and a collar for the Throttle side from Home center.
As a result of the installation, the look and feel has changed considerably, and the rearward illusion that had been bothering me for some time has been reduced, so I'm satisfied!
View detail
Titaniumium Bolt for Brake Discs Looks good.
It was used to replace a Brake Disc.
Since there are 10 Front alone, I was prepared to pay a reasonable price.
However, this product is relatively inexpensive.
Torque, not HEX.
Aluminum and Titanium are susceptible to biting, so Anti-seeds was applied and installed.
No problems so far. It looks good too.
View detail
Fits: Others
Ensure inspection before shipment
The product is fine.Quantity:I ordered 1 set of 2pcs. I wanted 4 bottles, so I ordered 2. I wanted 4 bottles, so I ordered 2.
I recently asked a question about Brembo radial caliper and the OEM Product is Brembo radial caliper, so if the installation Pitch is the same, it can be installed, but it is not compatible with your vehicle. Brembo radial caliper is a Universal Product per installation pitch? Do the people working here understand the structure of Motorcycle?
View detail
Fits: YAMAHA TW225E, HONDA CRF50/CRF250, SUZUKI DR-Z70, YAMAHA TT-R250, KAWASAKI D Tracker, KAWASAKI KSR-2, HONDA XR650R, SUZUKI DR-Z400SM, YAMAHA TW200, YAMAHA TT-R50E, YAMAHA DT230 LANZA (DT230), SUZUKI DR-Z50, KAWASAKI KSR-1, HONDA GORILLA, KAWASAKI D Tracker 125, HONDA XR230, HONDA FTR250, HONDA MONKEY, SUZUKI HUSTLER, SUZUKI DJEBEL
As FATBIKEHandlebar
FATBIKESTD Handlebar is Straight Type and there is not enough space for mounting Light, Light switch, Back Mirror, Bell, and Clock with BraceHandlebar to secure the fixed position up and down.
Painted Lime green and installed.
I am glad I chose this handlebar, because it is thick, heavy, but well made and low priced.
If Brace had been integrated with Handlebar and 22.2mm, it would have been better.
Personally, I found it to be a very good handlebar at a low price, well made, and without a cheap feel.
(Even though it is well made, if the thickness is the same, aluminum is weaker than steel, so it may bend or break if it is knocked down by off-road or heavy motorcycle.)
View detail
To be used for KSR80
I bought this Switch to add Hazard functionality to my KSR80.
It is not yet installed as there are many issues to be addressed.
Switch, but Material:The quality of the plastic product is not good, but I think the quality is good enough for this price.
There is no Instruction Manual (I am convinced that the absence of one is indicated in the sales comments), so it is tough if you lack electrical knowledge.
I need to drill a hole in Panel, but I don't know how much hole to machine.
Even if you use Bracket, there are no instructions for board thickness, so Switch may rattle if you have a thin panel.
For people who are not afraid to make a billion mistakes. 。 For those who have difficulty, it would be better to purchase a similar product from a well-known manufacturer.
View detail
It's very inexpensive, yet quite usable.
The Bluetooth connection is fast and stable for the low price. Wind Cutting noise gets worse at higher speeds, but considering the price, I am satisfied. View detail
light
I bought it because I wanted to lighten the weight around the Handlebar.
The OEM's Headlight is just gone, as they wanted it to be.
The handlebar area has become very light, and handling has become lighter.
Mirror was also changed to Trial mirror at the same time.
Significant weight reduction.
The drawback is that the lights are dark, almost invisible, etc., so be careful when driving at night.
View detail
Fits: HONDA VFR400, HONDA NR750, HONDA RVF750 R, HONDA VFR750 R, HONDA CB1000 Super Four, HONDA X4, HONDA CB400SF, HONDA HORNET250, HONDA NSR250 R (MC18) for Front, HONDA NSR250 SP (MC18) for Front, HONDA NSR250 R (MC21) for Front, HONDA NSR250 SE (MC21) for Front, HONDA NSR250 SP (MC21) for Front, HONDA NSR250 R (MC28) for Front, HONDA NSR250 SE (MC28) for Front, HONDA NSR250 SP (MC28) for Front, HONDA CB400SF version S F2V 96 for Front, HONDA CB400SF version S F3T 96 for Front, HONDA BROS400, HONDA RVF400 R (NC35) for Front
Anyway cheap
The hole where the Pat pin goes in was deformed or the Pin did not go in.
Quantity:Quantity because I bought 2 Sets.:1 Set of 4pcs. but all are the same.
I forced the pin through and griggled it and it passed lightly, but I am concerned that it will not rattle when used as is, I hope it was just hard because of the paint getting in it.
Compared to other companies, it is by far the cheapest, so I would like to see its durability and decide whether I would choose it again next time.
View detail