Reviews
It is easy to install.
This is my first Return in 20 years, so I bought it to prevent standing moss!
Torque wrench is required as 5Nm is indicated for screw tightening
I didn't have one, so I bought a Torque wrench, but I didn't know how to use it, so I took it to a Motorcycle shop and installed it myself while they showed me how.
The appearance is not so prominent, so it may not be enough for those whose main purpose is to dress-up.
I don't know how effective it is because it hasn't rubbed off yet.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000 GT
Before installation, there is a conundrum.
It could not be installed on Axle Shaft as is.
Shaft insert is Quantity:Pair (for Left and Right) Since it is the opposite, the Protector cannot be installed (press-fit) unless it is replaced.
I will have to ask Motorcycle shop to replace the Shaft when I replace the Tire.
(It's a pain to have to pay for labor)
I am very disappointed that I cannot install it even though I ordered it and it arrived the next day.
P.S. I checked MotorcycleCatalogue and all applicable Motorcycles were Nut side Left.
Please note that those who purchase
View detail
Included Bolt
Please use Stainless Steel for the attached Bolt. View detail
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
Logo is Cool
Material:The Aluminum ones look worn out after use,
I looked for it among DURACON's things.
After all, the Logo is Cool.
View detail
It is a good product
I purchased this product because I was concerned about working with the Shoulder Type since the Motorcycle Axle is not hollow. There is no problem in installation. I don't think it will come off with the Y-type Hook. The quality is quite good, but the price is high. If it were a little cheaper, it would be easier for people in need to get their hands on it. View detail
Axle Slider
Axle Sliders are sold by various manufacturers, but most of them are black in color, and this was the only one in gold. I am riding a Z900RS SE, and I really wanted a gold color because the front CB400T's tube is gold. It is easy to install. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R
Easy PetitRear Sets
The OEM position feels a little low, so I installed it as a trial until the Rear Sets arrive. The OEM footpeg is thicker than the Rear Sets, so the difference between the OEM footpeg and the frame is more noticeable. Unfortunately, the bolt diameter is a little thin, so if you tighten it properly, the bolt will not come to the center of the hole. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Frame Slider
The texture is good, easy to install, and the large size is just right. View detail
Babyface Lever Guard
About quality and texture Hard aluminum feel. Looks sturdy and able to restand drop I guess. About the feeling of use Length is adjustable. Able to fit together with my gale speed brake pump and clutch original length Products to buy together Bought together with babyface end bars that fits directly to the original handlebar. Difficulty of installation Easy to installation with less then ten minutes. Cost performance and comparison with other products Price and outlook will not be losing out to other competitors brand. About shipping and packaging Well plastic packaging. No issue when received item Any concerns, cautions, or advice when purchasing Need to find matching end bars for your bike. If it fits no issue installing the guard. There's a bit of gap on the Original handle bar. But I think it's not an issue. View detail
High quality product
About quality and texture Bra kvalitet About the feeling of use Products to buy together Difficulty of installationAbout quality and texture Lett og instalere About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Gode fraktpriser og godt pakket Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
a little satisfied
It feels more like a firmness or a solid Image. Low to N/2 to N is easy to enter.
I don't know how it will look when you get used to it, but it is an Image with a few dozen kilometers on it. It's not a poncho, so it's a product for people who have some knowledge about it. If it were a little cheaper, it would be a hit product.
View detail
Exactly what I expected.
I have an external caliper, so I installed it to avoid damaging it as much as possible. It is not as aggressive as the rear slider and does not look bad after installation. It will be installed without any problem. View detail
Fallen cannibals
The pedestal is rugged, but it is attached at a position where the Damage does not go directly to the body of the vehicle at the tipping angle.
Quantity:Pair (for Left and Right) Asymmetrically, there may be a preference for or against, but it seems to serve the role well enough.
View detail
We will protect it well.
Well done.
If the Swingarm Protector is used in combination with the Mirror, Handlebar Weight, and Lever are only affected by a fall.
It protects them well.
View detail
Convenient for fixing
Convenient to fix with Tie Down when loading Touring net or TRANbo. No overhang is a concern.
It is also possible to continue using Tandem Footpeg without any problems.
However, the screws used for fixing (OEM diversion) are full of locks and are difficult to remove. Screw locks are necessary because they tend to loosen when reinstalled.
View detail
Tandem Footpeg was in the way.
[How is it used?
The Tandem Footpeg was removed because it often interfered with the heel of the shoe and felt in the way.
Installed because it would not be possible to secure the cargo rack or Tie DownHook if it was left removed.
Was the one you received as per Image?
The texture is good. The area is BabyfaceQuality.
Was the installation difficult?
It is very easy to remove the footpeg and squeeze it with the supplied Bolt.
The Helmet holder can be installed with it attached or removed, of course.
The Bolt that came with it was not particularly accurate or anything.
How was your experience with it?
Anodized fallout is possible due to some slippage, but it is not a problem for functionality.
View detail
Axle Slider
Low price, easy installation, and Gold is not available from any other manufacturer. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Frame Slider
The price is low, installation is easy, and Parenthesis is good. View detail
Effective for standing moss!
[How is it used?
Used in gpz900r,.
Was the one you received as per Image?
Yes.
Was the installation difficult?
The Engine Mount bolt has an opponent on the back, so it was very troublesome to have to work on it to prevent the opponent from turning around.
How was your experience with it?
It was installed only on Upper Cowl, but it was effective against standing moss ^^^;.
[Included Parts:were they on?
Bolt
[Was there anything that disappointed you?
The place is not very cool looking.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1100
BabyfaceFrame Slider
The same Babyface as Axle Slider was used to create a sense of unity. View detail