Reviews
Smartphone Holder
Hold feel and texture is good. And cheap. View detail
It's a bit expensive
I want to mount my phone in a position where I can see it easily on my Racer9GT, so I have a FairingBracket installed.
However, the bar to mount is 12mm, which is considerably slimmer than a handlebar, so I had to use a regular mount base with a Gon Seat or something like that, but I found a product that is perfect.
It was originally designed to be attached to the bar portion of Mirror, but the size was JUST right. Spacer also comes with several sizes to fit various sizes, so it can be used for other purposes.
The Base that originally came with the RamMount was ported to the other Motorcycle, so the Arm and Body can be used.
Still, this price seems high for Base alone, but...,
View detail
Easy
[How is it used?
For Touring's smartphone Navigation.
Was the one you received as per Image?
Almost as per Image.
Was the installation difficult?
The tools required are also Quantities:Set so anyone can do it.
How was your experience with it?
As long as the Holder part does not interfere with the Meter, it is a good thing because it is easy to attach and detach the phone, and it is also cosmetically pleasing.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
Holder is plattic, so deterioration over time may be inevitable.
View detail
Used in Touring!
The handlebar of my YAMAHA NMAX155 is not bar-spec, so I have installed KIJIMA's Handlebar Mount Bracket (purchased from Webig before). I purchased the 90mm Type because I thought that the 90mm length would work well for the reasons that it would not overlap with the meter, my line of sight would be on the same level as the side-view mirror, and I would need the same level of distance as the side-view mirror to prevent presbyopia. Considering the vibration, is this length the limit?:After repeating the setting process of setting and checking the line of sight several times, and after confirming the setting after an actual ride, the decision was finally made. There was no vibration or shaking due to impact to the extent that I felt discomfort. I don't drive while looking at my phone, so I only look at it occasionally, but if the road surface conditions are good, there doesn't seem to be much blurring. View detail
I used it in Touring!
(1) Charging
I am using an AQUOSwish2 budget phone. Wireless charging. There is no functionality; the battery is charged using a USB cord. Some Impressions from other companies state that Wireless charging gradually depletes BATTERY even when running while charging. in the TEST run, charging from the USB port of the Shuriken is about 1 hour from 56% to 96%. In the real Touring, the battery stays at 100% all the way while charging and running with Gugu Luna Bi working while charging. Maybe it depends on the phone model, but I think charging using the USB port is better.
USB cord
The Type C connector has a narrower and deeper entrance to prevent waterproofing, so the Type C connector normally sold cannot be inserted because the plastic part is too thick. The Type C used for smartphones was not usable. I wonder if it is possible to use a thin one. I purchased the 15cm Type OEM Product from KaEdia. The length is also unobtrusive. If possible, I hope that Mr. WeBig will also carry this product.
(3) SAEConnectorCap
The SAEConnector on the Body side has a Quantity:Set, but the SAEConnector from the power supply section has a Quantity:It is not set. I personally do not like it because when the Shuriken Body is removed, the SAEConnector part on the power supply side is exposed. I bought it from CaEdia because it is not a car accessory dealer. ring size does not go through Fuse, so it is fixed near the SAEConnector part to the extent that it can be moved inHemp palmock (Tie Wrap). Normally, caps are connected to each other to prevent dangling. I hope Webig will carry this product if possible.
SafetyBand
This is Quantity on your phone.:If you don't Set it, it is playing with it and it makes a low, light sound with vibration. I feel that Band is too powerful when I use it, but even if it is troublesome, Quantity:It's better to set it. Strong impacts from rough surfaces can be tricky.
5) Feel of use
Quantity:When you set, you have to press the middle Switch with your phone, but you have to get used to it just for the simple task. It feels awkward at first. When you remove it, you have to squeeze the bar on the SIDE, and it does not feel bad. The color of this bar is like silver. If possible, I would prefer the same glossy black color as the body.
View detail
good-looking
It does not sway much while driving and is very stable.
This was my first time installing it, but it was easy to do by myself without hesitation!
Since it is a Scooter, I also liked that it has a Mirror mount.
It is easy to remove and install because it is instantaneous.
However, it was a blind spot that I could not install it if the Smartphone case has a Ring on it.
Remove the Case and use it.
View detail
Fixing stiffer than previous product
I had used the previous product, but this new product looks more luxurious, and the locking mechanism is quite good with easy detachment of the phone. It seems a little hard, but I think it will become less of a concern after a few more uses. View detail
Easy to use and safe
I installed on honda Hornet 250.Looking good design & easy to fixing.As a fixing tool Allen key will along with catalog. Depending on handle size there are rubber gland (for clamp mount)along with parts.can be turn and adjusted vertical or horizontal . The clamp mount will fitted firmly to handle."dyatoma made in Japan " printed on camp . I'm using 165.3 x 76.8 x 10.1 mm phone.tightly clamp to the phone,little hard to put on ,but can be adjusted as a phone size.phone mount corner clamps are protected with sponge pad for avoid phone scratches. There are 2 white rubber band hang on with phone bracket, it's for put in your phone for safety.(avoid falling down) I will Recommended this for motorcycle enthusiast. View detail
I am satisfied
Installation is quick and easy, and there is no fear of falling off even with the shaking of the Motorcycle.
The design is clean and satisfactory.
View detail
It's hard to tell the effect, but is there...?
[How is it used?
I bought this one because my iPhone Camera had broken in the past.
Was the one you received as per Image?
It looks exactly as it should and was easy to install with no problems.
How was your experience with it?
After actually using it, I honestly do not know if the vibration is reduced.
Since it is a 250cc single cylinder Motorcycle, there is a certain amount of vibration and the phone vibrates slightly.
However, I am satisfied with the use of the Camera on my phone without any breakage.
[Points to note]
After all, this Device pinching makes the phone seem to pop out more than expected.
The Mount is somewhat noticeable, but I can't go far without a map on my phone, so I guess it can't be helped.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA Majesty S
Match for American motorcycle!
Installed on Shovel 1977.
I thought that Smartphone Holder on American motorcycle is not basic MATCH,
We chose this product because we felt it was absolutely necessary when touring.
Since the Clamp portion is Silver, we feel that it is a good visual match with the Handlebar.
Overall texture is good.
However, since the holder part is plastic, I think it might break off due to UV rays and age-related deterioration if the motorcycle is parked in the blue sky.
A Hexagonal Wrench is also included for installation without tools.
It also has a Band to prevent falling.
I think the question now is how long it will last with Shovel's Engine heartbeat.
View detail
It seems to be the best I have used so far.
Dedicated Smartphone Case and Quantity:It is expensive to buy as a set, but since it is directly attached to the case, it is compact and inconspicuous when removed, and when worn, it is less extravagant than other products, so it is good to wear on a full cowl motorcycle.
If there is a drawback, I have to buy a Smartphone Case when I buy a new smartphone, but I am worried about how long it will take to get a dedicated Case when I buy the latest model.
View detail
tightly packed
It can be mounted most securely in any way.
Honestly, I think it's expensive, but it's a good deal because you don't have to worry about it because there are so many different types of Mounts to choose from.
View detail
This product is easy to use for various sizes.
This summer has been very hot and carrying a bottle of beverage was a must. I used to carry it in my bag or top case, but I could only drink it during breaks. I think the large size is good because I can easily drink when waiting for a traffic light by attaching this Bottle holder to the Handlebar Brace. The shape of the bottle has a suitable depth and the size can be adjusted. It can hold a thermal bottle, but if it becomes too heavy and affects huddle operation, I will attach it to the Engine Guard as well. The only drawback is that once the Holder is installed, the angle cannot be adjusted without disassembling the Holder. View detail
Beware if your phone is thick.
Purchased for DL1000 V-STROM250.
Similar products are available from other companies, but the original manufacturer of this shape is KaEdia, so there is a sense of security in the material and production.
Installation was easy and effortless with the included Hexagonal Wrench.
If you attach it to the bar mount of DAYTONA's Screen Offset Bracket, the screen angle of the Meter and smartphone will be aligned to reduce eye movement, and visibility when using the car navigation system will be considerably higher.
The phone thickness is 12mm including Case, so be careful if you are using a thicker phone.
SafetyBand is included and we recommend using it in conjunction with the SafetyBand.
My phone seems to be a bit thick, and although I can put it on, it does not hold completely. After it almost came off while driving, I always fasten the four corners with a band without any trouble.
The company's Shuriken Type, which has a similar mechanism, is said to be compatible with a thickness of 15mm, so it may be a good idea to consider that one.
View detail
Seems easy to use
The texture is a nice touch at this price.
I installed it on my PCX125 and it seems to be very useful with a good size feel.
I will use it from now on and expect it to be durable.
View detail
solid, stable and durable
I bought the new UA universal smartphne metal holder to replace the UA plastic holder used for 4 years. The metal holder include gripper mount 1" so I can mount directly to ball 1" on handlebar Ducati StrettFighter 1098, the UA metal holder is very solid, stable and durable. View detail
easy to install and strong
I use UA bulb mounting adapter to attach the UA smartphne metal holder to the Ram Mount 1" ball on the handlebars of Ducati StreetFighter 1098S. The UA bulb mouting adapter is very strong and I can rotate the phone around the ball, the metal holder and the phone stable when I ride my motorcycle on the road. View detail
Looks, good!
It looks, well, not so good!
However, when the Handlebar is brought to the locked state
I'm about to hit Tank...
The position of the attachment...but not so much, it doesn't bother me.
While driving, it is easy to see.
View detail
For Fat bar
[How is it used?
I purchased this product to install Gopuro on my Fat bar.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Just sandwich it between Screw and Nut, but in the case of Fat bar, since it is 28.6Size, sandwich the collar that comes with it.
Both Screw and Nut are small, so be careful not to lose them.
How was your experience with it?
It is just the right Size so it fits securely.
[Included Parts:were they on?
Size adjustment collar is attached.
[Was there anything that disappointed you?
I think it would be easier to use if it were more Compact, but it is good because it is durable.
View detail