Reviews
It depends on the Large size and shape of the phone.
The Ram Mount holds the phone securely without a tether, but I hook up a tether every time for insurance in case of an emergency.
Depending on the LARGE size of the phone and the roundness of the Edge, my phone will run out of tether in 1.5 to 2 years.
I bought it again because I ran out.
It is expensive and a cheap consumable as insurance against dropping your personal phone while driving.
The person making the Unit Purchase of this product has already installed the Ram Mount, so installation is easy and only takes about a minute.
View detail
If you don't want to fail, this is the one.
Installation and removal are fairly easy, and the cost is good because no parts have been damaged in about three years of use. Also, since the position and angle can be freely adjusted, it can be easily changed on the spot if it is difficult to see. View detail
For Touring with RAM Mount
I purchased this Bracket because I needed it to install a RAM Mount. It was easy to install and use right away, I used it once while touring and it didn't gap at all. View detail
For Touring!
I bought this for my Touring! I can use my iPhone 11 with Case without any trouble. I'm glad I bought it because it's so easy to remove my phone! View detail
Large sturdy without it, but it increases the sense of security.
I have never flown without it, but by installing it, I can make sure it is securely clipped and I don't have to worry about bumps. View detail
Can be fixed tightly, but high performance cameras must be used with care.
The camera can be fixed tightly, but if a high-performance Camera is attached, vibration will be transmitted and the camera will be easily broken.
I am using the phone I used before one to use Navigation.
View detail
First RAM MountSeries
This is my first introduction to RAM MountSeries.
It is very securely held, so you can put your iPhone on with no worries.
View detail
Improvement of the installation position of the Holder
I honestly don't know how it functions as a Shock absorber for the phone, as I can only trust the product description, but by installing this product, the area where the Holder contacts the Tank when the Handlebar is fully rotated is eliminated, and the preferred position on the Handlebar The Holder can now be installed at the desired position on the handlebar. I think it is worth a try for those who currently have difficulty seeing the Meter due to the Holder being mounted. View detail
Mounted on Motorcycle Handlebar Brace
I run with my cell phone attached to my Motorcycle.
I usually leave it on my Motorcycle.
It is quite resistant to rain and can be used for a long time.
View detail
A must for RAM Mount installation
The quality seems to be not so good since BALI is still present on the ball portion, but the installation itself was not a problem.
I have it mounted on a ZETA Handlebar and there is no wobble at all.
View detail
Securely attach your phone.
At first I was worried that my phone would fall off, but the tether makes me feel safe.
There are rumors that the Camera will break if it is an iPhone, so I am using my old iPhone 7 Plus with it attached.
View detail
It was more than I expected
I used to use Quad Lock, but I did not like it because the dedicated Case was thick, heavy, and not stylish enough for everyday smartphone use. I was looking for a Holder that I could use with my favorite Smartphone Case without worrying about camera failure due to vibration, and when I heard that DAYTONA had released an anti-vibration product, I immediately purchased it. I was a little worried that the height of the Holder would be unnecessarily high since it has vibration absorbing/mitigating parts between the Holder and the Clamp, but it is surprisingly low. The quality of the product is high, installation is easy, and so far I have been able to use it without any effect on my phone. The Silicon band that comes with the Holder is effective in preventing the phone from falling, but I removed it because I thought it would interfere with the operation of the phone. Coincidentally, it matches the color of my car, so I like that too. View detail
firmly fixed
It can be fixed in a tight and secure manner. However, there is no Bandetc., so be careful not to drop it.
A mount to fix to the stem hole is required separately.
View detail
Easy to install, functionality up
Installation is sensible and easy to understand.
The degree of freedom of setting position has increased in my case because this product (component) is Offset by the amount of this product (component). This is a secondary effect.
I hope Largei will be able to solve the vibration problem of the phone with this.
View detail
![[DEF] YATTAH Motorcycle Mount One Push](https://global.webike-cdn.net/photo/impression/7f/7f2e1c2226d44c6a6d2829ec31bd5b42L.jpg)
It's the only way!
When I converted my ZX14R to a Pipe Handlebar KIT, the clearance under the Handlebar Center is only about 4mm, so the usual Smartphone Holder cannot be attached. I was looking for a Smartphone Holder that can be attached to the Pipe Handlebar KIT, and this is almost the only one I could find.
Installation is super easy with no tools required.
View detail
sufficient for one's needs
Purchased to install ActionCamera avoiding the front cowl of the Motorcycle. The angle is more flexible and convenient. View detail
Fits: DUCATI SUPER SPORTS750950, DUCATI SUPER SPORTS750939
Position perfect!
Since the installation is Exclusive Design, it fits perfectly and is very easy to see the mobile navigation system. View detail
Solid construction.
Since I use my smartphone as Navigation, I thought I needed a Smartphone Holder and looked at various ones from different Manufacturers. The price is quite high, but the Material:Aluminum, well built and claimed to be 'A fall won't break my phone.' I bought it partly because it was
Installation is very easy.:Since it is Aluminum, it contains a Rubber seal to protect the phone. The rubber seal is cut according to the location where you want to apply it, so all you have to do is to apply it while referring to the Instruction Manual. I think I have been using it for about 3 years and have not needed to replace the rubber yet.
View detail
I bought it to try it out.
I bought it to see what it was like.
I think it had what I needed, I don't remember if Screw lock was included.
Installation is easy and can be done quickly by referring to the Instruction Manual.
I think I have driven about 4000 km using it. At first, I was uncomfortable with the higher position of the phone, it is higher for the thickness of the Rubber part.
The softness makes it difficult to adjust the positioning of the phone. It is also difficult to detach and attach the cell phone. Well, it is a matter of getting used to it.
While driving, you can see that the vibration is mitigated. That said, the screen is not difficult to see.
It is difficult to operate the screen while the Holder is attached. Once you get used to it, it is no problem.
I think the protection of the mobile Camera is working.
It would have been nice if the rubber was a little stiffer. Also, it would have been nice if it could be kept within the length of the Parts before installation.
View detail
Plating is beautiful
It holds them in place tightly.
The plating is beautiful and Large sturdy even after several years of use.
View detail