Reviews
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
For mounting Navigation
I don't use Navigation in my daily short touring and I don't want to put the Gadget bar which makes the noise around the Handlebar. It is.
I didn't want to install BallMount, which is the base, in a position where it is usually noticeable, so I used the Mirror hole (10mm) which is not used in the Clutch holder to install BallMount.
This position doesn't usually bother me, so I'm happy with it.
View detail
I'm super happy with it.
After installation, we have run the car at high speed, and it is firmly held.
I didn't feel the slightest fear that my phone would come off.
I would recommend this for use with an old bare iPhone 6, 6s, or 7 on a Navigation-only device.
Although it is a weakness that it will be a little bit of expense to get a RAM Mount from scratch, but
I think you get peace of mind at a reasonable price.
View detail
It's a little expensive, but it's good because it's universal.
With DAYTONA's smartphone holder, you can't help but look like it's installed low. Hold force is also used without a problem. I am glad that the diversion of other Mount is possible. View detail
I used it and it wasn't much.
Quantity:I bought this set because I thought it would be convenient, but it is not a good idea to use it to attach the mobile phone to the body of the Since the part is not fixed, the angle can change easily. I thought it was a bad idea to use it with it on. If it's another type, you can fasten the body and arm part with bolts. If you're going to use it on a Motorcycle or bike, buy the Type sold at RoseRose. Recommendation. View detail
It holds up well
I was worried at first about driving with my phone in between because it's just a pinch, but when I started using it, I found out that For the amount of time you drive on the asphalt paved road, it's sandwiched tightly and shows no signs of falling off
And yet, it's very easy to just shrink the X part of the Mount with your finger when you stop mounting and mounting
I used to use the one that does Mount of Screw type before, but I have to turn the screw every time It's a great feeling to use because it was a hassle to have to do it
However, this is not enough to install on a motorcycle, you have to have a lot of stuff to install it I can't go, but I think the price is a bit high as a total
View detail
We're holding them to just four points and they show no signs of falling off at all
In other brands, there are a lot of small and small size Mount products on the market, but Ram Mount is huge anyway
But the Arm part is also solid, and you can install various things with Option Parts is the strength of Ram Mount
By the way, if you use iPhone, the arm hits the volume button depending on the Mount Be aware that the sound may be explosive or silent
View detail
Hold tightly, easy to put on and take off!
Until you install it Do you think it could fall out of the car? I was worried that I was going to be held more firmly than I thought I would be, but it's safe to say that I am held more firmly than I expected
It's easy to put the phone on and off, no hassle It's more than worth the price
I would venture to say that one bad thing is the presence of the Holder when the phone is not on It is not a large problem child compared with the convenience
View detail
Difficulty in universalism
I bought it to attach my phone to the Assist Grip in my car; Motorcycle has a separate I use the phone Mount
The installation is Firmly and very easy to use
But when it comes to this product, Mount and Arm, which are supposed to be the Ram Mount's largest selling points, are not There is no universal nature of Clamp
If possible, I wanted to put an Arm between Mount and Clamp, but it was not possible to use it for the other ram Mount The Arm of the
There is no special mention in the product description
It is very disappointing that this is an imported product
The detail is that the part that holds the Mount is not a 1-Inch Ball, but has its own structure
The XGrip side is also a Female Dent? instead of a 1InchBall
If additional parts would help, I'd just like to know if anyone can help
The price of things is just too high to be Garbage
If you do buy it, recommend that you buy it at Rose for future development, and It is
I'd have to think about it a bit to buy it again
View detail
Pretty good
Until now, cheap Material:I used to use plastic ones, but the UV light made them white and brittle, and they look good It wasn't This one looks great, plus the phone stays firmly in place and doesn't seem to fall out at all However, the price is a bit steep View detail
Good product
I've been using Daytona's Quick Type mobile holder for a while now
Adjust with a commercially available transparent Hose
It was attached to the Handlebar Brace
But … every time I install it, I have to adjust the bolts and so on a little bit
annoying
I was wondering how I could find this guy
I've seen it installed and it's nice and easy to install
The Clamp is also very sturdy and won't move with ease
The main issue is that I'm totally fine with my phone and driving at high speeds
By the way, the Motorcycle is NAKED There is a certain amount of wind pressure
However, it is a little disappointing that the place is a little bit tilted when it goes over the Decoration depression in the construction etc
Even with that, it's great
I'm going to use the instant glue that comes with Rubber, but that guy is pretty strong and gets on your hands easily Caution
View detail
Reliable RAMMounting system
I was worried because it is only supported by 4 points of Rubber, but it didn't budge from the vibration of the road bumps Clamp force
I am using my iphoneSE as Navigation I remove it when I go into Convenience because I'm worried about theft
View detail
heavy
One word:heavy
if you have an iPhone, take the SIDE button
I'm thinking of going back to DAYTONA in a few weeks
it's not a good idea for iPhone users
View detail
Easy and Secure
Hold power is stronger than I thought
It's much easier to put on and off than the smartphone mount of other companies!
It's the only product that can be taken on and off in 5 seconds
Well, it's pricey because it's sold in installments with Base, Bracket and Holder! but…
I'm glad I bought this product!
View detail
Very tight grip!
I used it with the RAM Mount, which is attached to the iPhone 5, which it can hold very firmly. Which I do not have to worry about my phone being blown away during a long trip. Very flexible material And sometimes I use it with the iPhone 6S Plus, which is large But can hold my mobile phone well. View detail
It's the best we have at the moment
I'm using it on my Galaxy S8
Before I used this product, I was an XGrip, but the Grip hits the Button position on my phone Therefore, I was nervous about letting it go and using it there
After replacing it with this product, I was able to hold it without interfering with the Button
It's awkward because I'm still getting used to fixing and removing my phone
You'll get used to it soon enough
View detail
Plusα？
These are items to be added to the XGrip of Ram Mount
It seems to be standard on XGrip now, but the early XGrip models have this kind of fixed It did not come with any kind of Band
The XGrip alone has a good amount of holding power, but again, if you just pinch it with the force of Spring I was anxious, so I bought it as a spell
It's a very stable power, but it's not as strong as it should be for short-distance touring or city riding If you don't need to take your phone out, or if the XGripBody's holding power is enough to keep you in place Demerit to the area where you're not in a good mood, subtly not in a good mood, with a buLOVE la in front of you Ugh
View detail
Excellent Smartphone Holder
The three Parts can be installed in a variety of ways
Custom to your liking (^^)
The sturdy construction means you don't have to worry about your phone falling out
It's very good to use, and it's excellent!
View detail
GOOD RAM MOUNT PART!
I lost this item during the trip. I need to order this item again. I am very glad that it is still in stock. I use it to hold the iPhone 5, which it can hold firmly. And increase confidence while traveling on different road conditions. View detail
Good texture, easy to use, easy to fine-tune
I thought that it would be more convenient to have a smartphone in a touring, and various colors. And this is what I got. Usability was good as expected, but it is slightly unexpected that the X grip position fixing the smartphone slightly interferes with the charging terminal of the smartphone.. Basically, I use navigation while feeding. I wish I could shift the smartphone either up or down, but I wonder a bit of being unable to grip the center of the smartphone.. It seems there is no problem with an iPhone, it interferes with my docomo 's smartphone ... So I'm talking about buying anything other than X grips. But, I am satisfied with the easiness of attaching and removing a smartphone, holding power, so four stars. View detail
I think it's good.
StemHolder for in-vehicle video
RAM Mount so do not hesitate
I tried purchasing this.
Hold is also solid
I think Smooth is good for removal
is.
Stem and Jointetc. Owning
Because it was, it cheaply got up
When it comes to arranging all from 1, it is
It may be expensive - -
View detail