Reviews
Parenthesis OK
I have been looking for a White color, English Sticker to put on my RALLY50 side cowl for a while. I just found it on Webike, saw the impressions and bought it immediately.
This is the first time for me to paste a long Sticker with a cutout type.
I decided to give it a try anyway. I prepared water mixed with a few drops of neutral detergent, but it seemed difficult to design. This time, I decided not to use water, but to cut the backing paper before peeling it off, position it with masking tape, and apply it in a single shot.
When the backing paper is removed, the cover is thin and the Sticker itself is transparent. You can see the position of the text by touching it. This seems to work.
The Cowl is slightly curved, so the Right Side is a bit skewed, but I managed to stick the Right Side.
But I got distracted by the position of the first "D" when I applied it, and the first "D" was on the round recess at the Screw and Wrinkle came out too.
The longer Stickers are difficult to make. It is possible to make it with Cutting sheet, but considering the time and price, I felt it would be faster to buy it.
I couldn't get it right this time, but if you can do it as well as the others, I think it's great. The font of White fits RALLY50 well.
If there is a Chance, I will repurchase and Challenge again.
View detail
OEMSticker indeed.
Material of yzf-r25:Purchased to replace a scratched Sticker on a Carbon AKRAPOVIC.
I was quite pleased with the size, exactly the same as the OEM!
View detail
Good design
Install on Honda hornet 250.The sticker was amazing. After pasted it can't identify as a sticker looks like printed. Very thin layer with quality material. Recommend for yoshimura lovers. View detail
Good Quality Stickers
Stickers are simple film type. Good quality and sticks well. Only recommendation is for webike to consider envelopes for shipping, thus reducing cost. It came in a box enought to fit an engine clutch cover. View detail
Nissin sticker
Good quality. Perfectly glue will sticky to the body.i will recommend to who are looking for buying nissin sticker lovers View detail
Better to check before installation.
[How is it used?
Good because it is as per Image.
Was the one you received as per Image?
A few years had passed.
Seal surface is floating.
It was deteriorating.
I should have checked before installation.
There were two pieces in the package and one of them was beautiful.
After making a cut in the paper in the Seal section of the Reverse side.
Seal floating (with air bubbles)
I found it difficult to return the product because I noticed the
I applied it, but air bubbles are still noticeable.
Was the installation difficult?
Difficult to position.
Slightly, Quantity:Pair (for Left and Right) I wonder if the position of the Gap
How was your experience with it?
Good feeling
[Included Parts:were they on?
None
[Was there anything that disappointed you?
If it's new, it should be free of air bubbles.
I think, so Decal is only the first one.
I can't see it, so after I bought it, it's overlapping.
I understand the second check.
If possible, after a few years have passed.
I just wish you could have checked.
View detail
Sticker.
It is a Sticker that is neither acceptable nor unacceptable.
I use Motul's Chemical and wanted to put it on my Motorcycle.
Take care of Size when you buy!
View detail
Fits: HONDA MONKEY, HONDA DAX
It is a must for RetroTuning HONDA cars!
[How is it used?
I installed OldMONKEY to give it a more retro feel.
Was the one you received as per Image?
The design is good as it is like the former OEM Emblem, and the texture of the plating is also good.
Was the installation difficult?
It is no problem at all, as it is just a matter of fitting it into the Bracket.
How was your experience with it?
I am satisfied with the Polished Parts on the old vehicle, although it is a little uncomfortable.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It is not a disappointment, but since it is plastic parts, it may be difficult to get a sense of the quality.
View detail
SmallSize Sticker
It was the same etc. as the Size that is pasted on the SPIIIgnition coil.
Buy SmallSize if you want to stick it on the opposite side when installing Ignition coil or if it is upside down.
View detail
For this one... ・ (●´ωTranslated by.)
To be honest, I bought it because I really wanted to put this (see photo), which I had put on my previous Motorcycle!
I like this word a lot!
Well, originally, this 100%." Brand, which I liked in the early days before it was recently rebranded.
And I, too. I was allowed to use it again.
View detail
Fits: HONDA CB400 Fore (air-cooled), HONDA CB400 Fore (air-cooled)
It is GOOD as RepairSticker for old cars!
[How is it used?
I purchased this for Repair for Sticker which has deteriorated over time.
Was the one you received as per Image?
Quality like OEM Product.
Was the installation difficult?
Remove oil from the paste area thoroughly before applying.
Care must be taken to ensure that positioning and air do not enter.
How was your experience with it?
Durability is still to be determined, but there seems to be no problem.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
▼ We appreciate that the price is a little lower than other companies' products.
View detail
Even with the bike spending most of it's life out in the sun the black colouring shows no signs of fading
About quality and texture, I can confirm that the quality is great and the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This set of Honda decals just looks great on the fuel tank and even with the bike spending most of it's life out in the sun the black colouring shows no signs of fading. Products to buy together, If you are a fan of Honda bikes like myself then you could also add a some apparel from the Honda riding gear range to your cart so you look the part when you're out riding. Difficulty of installation, I can say the fitment of the decals for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the decals to help the adhesive have the best chance of adhering to the paint. Cost performance and comparison with other products, The pricing of this product is great. Your receive two decals that are of a good size and great quality from a well known brand. The pricing of decals similar to these that are part number specific to a bike will be much higher. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Adhesive Cutting Sheet
This is my second purchase
I had a lot of white kawasaki letters, so I cut two letters at a time and pasted them on the rim.
The adhesive is strong and does not come off.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
So that you can see in the dark.
I bought it so that I can easily locate it in dimly lit places. The price is also the price, so I guess it can't be helped that it looks cheap. I chose the color White and it stands out in dim light.
It is a pricey product, so don't expect too much.
View detail
เป็นสินค้าที่ค่อนข้างหาได้ยากและลิมิตเต็ด View detail
Paste into Side cowl
[How is it used?
We purchased this product, an OEM Product, to decorate our painted Cowl.
Pearl white and red are also available, but we chose black for an OEM look.
Was the one you received as per Image?
I had a rough idea of the size, but when I saw it when it arrived, it felt huge.
I put it on Cowl and it had a good Size feel.
Was the installation difficult?
It is a one-shot deal, as it cannot be reapplied.
As long as only the corners of the starting position are firmly aligned, there is no need to be that nervous.
In my case, it was applied at an angle from the OEM, so I applied it by intuition, but I think it worked rather well.
How was your experience with it?
Both Decal and transfer Seat have a very strong adhesive, so it is unlikely that they will come off.
The size of the product and the area to which it is attached is also large, so it is even more so.
I am satisfied with its solid presence.
[Included Parts:were they on?
This product is 1 Piece.
[Was there anything that disappointed you?
The adhesive strength of the transfer Seat is too strong and it would be easier to apply if it were a little weaker.
【Review】
The adhesive is strong, so it is a one-shot deal, but that makes it hard to peel off.
Side cowl had a good Size feel to the finish after repainting.
View detail
Fuel TankRepair for the finishing touches.
[How is it used?
NSR250R (MC21) Repair and repaint finish of the Fuel Tank of
YAMAHA Super JOGZr Wing BlackDecal is also available in Red and Black, but I chose White because I wanted a Normal look.
Was the one you received as per Image?
It is my fault for not reading the description at all, but Quantity:Pair (for Left and Right) Of Quantity:This is a Set item. (If you make a mistake and use Quantity:2pc. I bought a Set lol)
The color and Size feel were as expected.
Was the installation difficult?
The tank is a three-dimensional shape, so it was difficult to align it with the actual object.
It is recommended to use masking tape to mark the corners of the transfer seat so that the corner of the seat and the corner of the transfer seat are aligned.
Also, once applied, the transfer Seat was too strong and tore off a bit when I tried to put it back on. I had no choice but to stick it as it was.
How was your experience with it?
As an OEMSticker, I have no complaints about the look and feel of the product.
The difference in the finish of Restore is considerable without it.
[Included Parts:were they on?
This Sticker and transcription Seat only.
[Was there anything that disappointed you?
Not particularly
【Review】
Quantity:Pair (for Left and Right) The product is in a "good" condition, and I am satisfied with the quality.
Please be careful only with the alignment when attaching.
View detail
Old Logo
[How is it used?
It was used as the final finish of the Cowl paint job.
The OEMCowl I used as a reference for painting was the one with the HRC Sticker, so I purchased the OEM Product.
Was the one you received as per Image?
As shown in the picture, each Size is a Quantity:It came with a 1pc. mount.
I am glad that the old HRCLogo is still available for purchase, but I would like to see the new Logo as well.
How was your experience with it?
It is good because there are various sizes and you can choose the one you like best by matching it with the actual product.
Personally, I don't need Small Saisai Size so much. "Honda Racing" I thought it would have been nice to have some in.
[Points to note]
Not particularly
How did it compare to other products?
I was not sure whether to go with HRCSticker, which is published by FACTORY EFFEX.
I chose this product because it is a Honda OEM Product and I could choose the size.
【Review】
The quality of the product is assured by the fact that it is a Honda OEM Product.
I thought it was a bit expensive for a sticker. I thought it was a bit expensive for a sticker, but it is good that it is weather resistant considering that it is to be attached to the car body.
View detail
The HONDA party can't get enough of it.
I bought the Black lettering because the Cowl part to paste is White.
It is Stylish because it is a Type Sticker where only the text remains.
The size is large, so it is impressive and I like it.
I don't feel any deterioration etc. even if I keep it stretched for a while.
View detail
Pitta for Helmet.
This is my second purchase, I put it on my Helmet. View detail