Reviews
It was used for Mirror breadth extension of a GSX1100S KATANA. When normal, it was interfered by the body and right behind could not be seen, but the extended Stay here and the authentic positive regulating function were used, and it expanded wi
It was used for Mirror breadth extension of a GSX1100S KATANA.
When normal, it was interfered by the body and right behind could not be seen, but the extended Stay here and the
authentic positive regulating function were used, and it expanded width 3 cm of one side at a time.
View detail
Since back could not be seen unless it shifted the arm, it attached for the improvement of a field of view. Since just beside [ ] is not made to offset, it is an Offset of about 25~30 mm actually. The Mirror has jutted out just before Handlebar-
Since back could not be seen unless it shifted the arm, it attached for the improvement of a field of view.
Since just beside [
] is not made to offset, it is an Offset of about 25~30 mm actually.
The Mirror has jutted out just before
Handlebar-end end.
In rearward visibility, at least
, however this became quite good.
The back can be seen even if it does not shift the
arm.
It is preeminent for the
effect.
The bull bull by
vibration does not improve as a
fault.
(Although it is natural ...) Since the
Mirror projects outside, the directions which carry out a pickpocket omission are cautions at contact.
a part to use it for the right-hand side of the
Yamaha -- one 1.5 times the price of this -- just for a moment ... I want you to make it the same as the left
View detail
It is high! When placing an order with two intentions, only one piece arrived but he was surprised at the height of a price. Although it is my responsibility of which it was convinced whether see only a price and to be a right-and-left Set .. If you mere
It is high! When placing an order with two intentions, only one piece arrived but he was surprised at the height of a price.
Although it is my responsibility of which it was convinced whether see only a price and to be a right-and-left Set .. If you merely see only a photograph, what will not understand how many pieces an order for can be placed, but I will also think unkind kana just for a moment.
Since he buys the right-and-left Set of a cheap Mirror if two of these are cut, those who have a prejudice in a Mirror had better buy it.
View detail
Since it is exclusive elegance, there is no problem in particular.
Since it is exclusive elegance, there is no problem in particular. View detail
Since it was hard to see when the Mirror was attached to the Handle, it purchased. Height is OKed now.
Since it was hard to see when the Mirror was attached to the Handle, it purchased. Height is OKed now. View detail
It purchased in order to make it as legible as possible, since the Mirror was hard to see when the Bar handle was used and the Mirror was attached to the Handle. well -- a feeling -- it became legible.
It purchased in order to make it as legible as possible, since the Mirror was hard to see when the Bar handle was used and the Mirror was attached to the Handle. well -- a feeling -- it became legible. View detail
Although the DAYTONA Parallel leaf mirror was attached by substitution of the damaged pure Mirror, the Mirror adapter was attached in order to earn height, since back visibility is low even if it carries out angle adjustment of being various, since height
Although the DAYTONA Parallel leaf mirror was attached by substitution of the damaged pure Mirror, the Mirror adapter was attached in order to earn height, since back visibility is low even if it carries out angle adjustment of being various, since height is low.
There is also no sense of incongruity in particular by the difference of texture from a portion besides
, and the back field of view also became good and it has satisfied it.
The Size of the hexagon-head portion of a product is 14 mm.
View detail
"When a handle angle was changed, in order that a mirror reflects only a ground surface, I purchased. About the angle, although it was satisfactory, it was hard to attach as the angle turns round and round. Since the fixed method is a double nut, two span
"When a handle angle was changed, in order that a mirror reflects only a ground surface, I purchased. About the angle, although it was satisfactory, it was hard to attach as the angle turns round and round. Since the fixed method is a double nut, two spanners may be needed. As goods, it is not too bad nor not too good." View detail
It was used as a Stay for KDX125 left Mirrors. Although it becomes with some Offset a little, it can be used ordinarily. It is satisfactory as substitution of an original manufacturer's product.
It was used as a Stay for KDX125 left Mirrors. Although it becomes with some Offset a little, it can be used ordinarily. It is satisfactory as substitution of an original manufacturer's product. View detail
When the jacket for winter of eye [Webike-monitor] thickness was worn, the mirror half hid with its arm, and since back was hard to see, this product was attached. Since the hole of the fixing part was widely vacant, it is easy to carry out positionin
When the jacket for winter of eye [Webike-monitor] thickness was worn, the mirror half hid with its arm, and since back was hard to see, this product was attached.
Since the hole of the fixing part was widely vacant, it is easy to carry out positioning and came to be able to perform a back check former more safely.
Although he does not want to change a mirror, it is a recommend at those who want to carry out a back check more safely.
View detail
It is attachment at majesty. Since he wanted to attach a mirror with short stay, purchase attachment was carried out to serve also as a spacer. Since it was cheap goods, finishing was anxious, but it was not so bad and carried out. However, th
It is attachment at majesty.
Since he wanted to attach a mirror with short stay, purchase attachment was carried out to serve also as a spacer.
Since it was cheap goods, finishing was anxious, but it was not so bad and carried out.
However, those who expect, such as mirror finish, consider that it is better to choose a higher thing.
View detail
Since the mirror of a transalp differed in a location on either side, that visual fields differ worried it for a while. Since the left mirror can be separated from itself, it is thought that the span of adjustable range of the visual field at the time
Since the mirror of a transalp differed in a location on either side, that visual fields differ worried it for a while.
Since the left mirror can be separated from itself, it is thought that the span of adjustable range of the visual field at the time of adjusting an angle with this also increased.
Exchange of the mirror is also considered, and since interference of a screen or a knuckle guard is also assumed when a wheel is turned depending on a mirror, I think that it will be useful also at the time of exchange.
View detail
When it is going to attach to the ape 100 the mirror attached to the former motorcycle, it is a mirror of M10! But an ape is M8! It was that this was troubled, and ADAPURA was purchased and it corresponded. It is cheap, and but, it carries out perfect
When it is going to attach to the ape 100 the mirror attached to the former motorcycle, it is a mirror of M10! But an ape is M8! It was that this was troubled, and ADAPURA was purchased and it corresponded.
It is cheap, and but, it carries out perfectly, and shines and there is no complaint.
The mirror which was carrying out dead storage could also be utilized and it is satisfied with favor.
View detail
Although the mirror of XR does not become configuration top symmetry, if this adapters is used, the set location of a mirror can be shifted ahead. As a result, it was able to bring close to the infinite location where a mirror on either side is symmet
Although the mirror of XR does not become configuration top symmetry, if this adapters is used, the set location of a mirror can be shifted ahead.
As a result, it was able to bring close to the infinite location where a mirror on either side is symmetrical.
Although purchased as daily necessities in such a sense, I think that it is the result good also as accessories since the design is smart.
View detail
8 mm -> 8 mm was purchased for the height control of a mirror. It becomes easy to carry out a back check, and is satisfied with the location of the mirror having become high.
8 mm -> 8 mm was purchased for the height control of a mirror.
It becomes easy to carry out a back check, and is satisfied with the location of the mirror having become high.
View detail
After a master cylinder and clutch holder exchange, since an original manufacturer's product stopped having stuck, it purchased. An original manufacturer's product is not attached, if there is this [ no ] since it is a reverse screw. Since a mirro
After a master cylinder and clutch holder exchange, since an original manufacturer's product stopped having stuck, it purchased.
An original manufacturer's product is not attached, if there is this [ no ] since it is a reverse screw.
Since a mirror position will become somewhat high if it attaches, back may become legible.
As long as there is no favorite mirror, there is no necessity.
View detail
Originally, although this product was used for the height adjustment of a mirror, I purchased for the tapped hole protection by the side of a receptacle. That is, although the scalpel thread part of the master side of a brake or a clutch is made of al
Originally, although this product was used for the height adjustment of a mirror, I purchased for the tapped hole protection by the side of a receptacle.
That is, although the scalpel thread part of the master side of a brake or a clutch is made of aluminum, the mirror side will end up the tapped hole of a master side becoming foolish, and carrying out recoil or carrying out master exchange, if the mirror is frequently desorbed for iron.
If it is most Rider, he will think that desorption of a mirror is not made almost, but if it participates in a gymkhana practice meeting, in order to avoid breaking a mirror at the time of a fall, a mirror will certainly be removed.
Since about one roll of the upper part by the side of a scalpel screw thread had deleted a few for that reason, this product was purchased.
Since both sides change the screw-thread portion desorbed frequently to iron by using this product, it is an intention that a thread part can be prevented from becoming foolish.
Although structure's is good, since it is not having it described whether it is used between master sides whether it is used between mirrors although the goods themselves are described in the using-merely certainly-attached washer description, it is unknown in which.
Since it will turn also around this spacer both together with the nut of a mirror when removing a mirror if it equips for the time being and does not attach to a master side, I have equipped the master side.
It is somewhat more smallish than the nut (17 mm) of a mirror part, and a crevice is made for a while with the spanner of KTC in the size of the about between 16 mm and 17?.
Probably, as goods, it will be better for it to be satisfactory since torque is not just going to start, but to unify this neighborhood into 17 mm.
Since the range which is visible by a mirror spread as a result of the elbow portion with which it moved and the mirror part was crowded although a 2-cm location only rose becoming an upper arm part, it was a delightful by-product that the back check became easy.
View detail
It purchased to fix not an original manner of use but the monitor holder of the navigation for motorcycles (mini gorilla). If it is a certain manufacturer's mounting system, it will be satisfactory, but for me, it is a large sum. Although some dev
It purchased to fix not an original manner of use but the monitor holder of the navigation for motorcycles (mini gorilla).
If it is a certain manufacturer's mounting system, it will be satisfactory, but for me, it is a large sum.
Although some devices are required, since this stay folder excels [ texture / reinforcement and ] in cost performance, it will surely function enough as a base of navigation attachment.
If attachment is completed, I will introduce anew.
Language of gratitude in correspondence quick [ Mr. Webike ] and polite first of all.
View detail
It was used when FZ1Fazer was handle-mirror-ized. Since the visibility of the external mirror was not quite satisfactory, it adopts here. It came to be able to carry out the back check of only its arm having been visible just.
It was used when FZ1Fazer was handle-mirror-ized.
Since the visibility of the external mirror was not quite satisfactory, it adopts here.
It came to be able to carry out the back check of only its arm having been visible just.
View detail
I would like to use the mirror bought before... Since the car body to attach was a yamaha, this product was purchased. Only at one of the two, since height changed, it has been improved by purchasing an adapters on either side.
I would like to use the mirror bought before... Since the car body to attach was a yamaha, this product was purchased.
Only at one of the two, since height changed, it has been improved by purchasing an adapters on either side.
View detail