Reviews
Handlebar on the exchange
When exchanging the Handlebar, the OEM's Throttle pipe had unevenness and it was said that it was difficult to insert a Grip, and it was replaced in the meantime.
The exchange is very easy, and Grip also entered Smooth.
As High Solo there is no Large Kid effect.
It's cheap and it's not a main purpose, so it's not a problem at all.
Also, because it is shorter than OEM's Throttle pipe, we will move the position of the Switch box slightly outward.
It is necessary to re-open the anti-rotation hole of the Handlebar or to scrape off the detent of the Switch box.
As we moved the Switch box, Mirror also moved outward, making it easy to check backwards.
View detail
Fits: HONDA Lead 100, HONDA DIO110, HONDA LEAD 100
A little longer for DIO
It is purchased because OEM was broken for SUPER DIO 50
It is delicately long but there is no problem
Because 50cc is fully open, SUPERThrottle is appreciated
View detail
For winter preparation, HeaterGrip.
It got cold so we planned to install Honda OEMGrip heater.
However, the width of High Solo Holder of already installed antlion is too narrow and can not be physically combined.
At the same time I thought about replacing it with Active High Throttle Kit, but since switching the Cable was very troublesome, I tried to change whether it can exchange Active Holder Only as it is with Cable.
As for the result, both FittingSize and Screw Pitch of Cable were the same, and the rigging part of Cable was also no problem in particular, so it was installed indeed safely.
Thanks to Grip heater I managed to install it so I was able to give him the benefit of Heater even at Touring.
View detail
Increase High Solo
Exchange at the time of handlebar exchange
It is an excellent one that can be used as it is with OEM's Switch and can be converted into High Solo.
SmallEngine Displacement Volume There are many scenes that turn Axel well enough for cars
I feel that I turned the posture easier by turning on this.
View detail
It is effective for the price.
As stated in the singing phrase, exchange of Grip becomes very easy. It is 10% High Solo, but if you are on a city level Level you can be satisfied with this level.
If you think that you can reduce the burden on the arm at this price, I think it is effective.
View detail
I can not expect high solidization.
It is original practice to facilitate the exchange of outside grips with Plus 10% High Solo, but it is not a practical Level. It is not recommended for those who expect High Solo.
Those seeking High Soloization should obviously buy High Throttle Kit.
View detail
Anyway old poi!
Clearly, making the moving part is the lowest! Chamfering is not done - It is a faulty item for those who do not have knowledge because of the feeling that Steel remained in the place where Wire fits. Processing is necessary. Just because I was looking for VINTAGE ぽ い Throttle holder I fell in love and bought it so I am not complaining!
View detail
Fits: SUZUKI Address V125S, SUZUKI Address V125S, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125
v125
Since it is the same size as OEM, it was able to be used without problems.
Although OEM has the best, since the product of this one is Flat, Grip is also easy to fit Spec. is.
View detail
Fits: Others , HONDA APE 50, HONDA GORILLA, HONDA MONKEY
Ape 100 OEMHandlebar Installation was completed.
Attached to Ape of Battery reply.
I wonder if there was existence of Switch.
I think that making details is also solid I was satisfied with going items.
View detail
I needed to have a double cable throttle to install a FCR carburetor. Type 2 is 1.6cm thick, so it's good for motorcycles that have allowance around the throttle area. It is a simple classical style throttle holder. But it's really delicately made
I needed to have a double cable throttle to install a FCR carburetor.
Type 2 is 1.6cm thick, so it's good for motorcycles that have allowance around the throttle area. It is a simple classical style throttle holder. But it's really delicately made and beautiful. You will immediately notice the difference of performance level and texture if you compromise on simple parts like this. And you can see ACTIVE's sincere attitude towards manufacturing in their parts.
The manual is clearly written. You just need to pierce the handle ring and then pierce this holder. Tighten the set screws evenly to the three screw holes. Tighten the ring and fix it to the handle pipe. Easy.
There are lots of ACTIVE throttle parts, and they are good because they are inexpensive. You better check the condition of your bike (switch box width, brake lever angle or cable wiring, etc.) before you choose your throttle wire from the three options. (Thickness and maintenance method differ.)
The ACTIVE WEB catalog of Webike contains all the necessary information and is really helpful. So you better check it before you actually make your order.
I bought the holder, inner and wire separately, but if you are not so sure, you can buy an exclusive kit designed by model.
Finally, if you are to choose ACTIVE throttle products, you need to coordinate it with ACTIVE products, and you may think that lacks versatility. But as I have written before, there are lots of options prepared, and it is rather convenient for you to make partial repair or to have a change of look.
View detail
Fits: HONDA PCX150, HONDA Dio 110., HONDA PCX125
It purchases to angle CUBs.Since the attachment had to remove the Cover and lights of the Handle, it took about 1 hour. Although it is natural, since the quantity which turns an Axel compared with a NORMAL decreases, a wrist is easy.The place whi
It purchases to angle CUBs.Since the attachment had to remove the Cover and lights of the Handle, it took about 1 hour.
Although it is natural, since the quantity which turns an Axel compared with a NORMAL decreases, a wrist is easy.The place which even
worries was not worried during operation, although the Clearance of the difficulty of a Handlebar and a Sleeve was slightly large.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA DAX, HONDA MONKEY, HONDA SUPER CUB110, HONDA CL50, HONDA DAX, HONDA DAX70, HONDA XR100MOTARD, HONDA XR50 MOTARD
It equipped to compensate for Handle exchange. I think that the UP effect is enough about 20% for the Normal cab. Although DAYTONA Ride bar 2 was equipped this time [ ], a thing with a large bore, a thing with a thin Handlebar, or a Fitting feel
It equipped to compensate for Handle exchange.
I think that the UP effect is enough about 20% for the
Normal cab.
Although DAYTONA Ride bar 2 was equipped this time [
], a thing with a large bore, a thing with a thin Handlebar, or a Fitting feels that it is not quite satisfactory and that it is a little loose.
It can exchange easily and is satisfactory.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA DAX, HONDA MONKEY, HONDA SUPER CUB110, HONDA CL50, HONDA DAX, HONDA DAX70, HONDA XR100MOTARD, HONDA XR50 MOTARD
In the case of FI MONKEY, it becomes about 10% of High throttle. There is almost no physical feeling effect. -- Since it becomes a Grip of penetration type, it can come to attach a Grip end, but the method of making a hole is also in an original
In the case of FI MONKEY, it becomes about 10% of High throttle.
There is almost no
physical feeling effect. -- Since it becomes a Grip of
penetration type, it can come to attach a Grip end, but the method of making a hole is also in an original manufacturer's product.
Since the one where
processing is more dreadful has goods of only the Throttle cone which is not a High throttle in the other company, it carries out the Recommendation of [ there ]! Since the
physical feeling is up to persons, it thinks that it is the highest in a direction to High-throttle-ize at least 10%.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA DAX, HONDA MONKEY, HONDA SUPER CUB110, HONDA CL50, HONDA DAX, HONDA DAX70, HONDA XR100MOTARD, HONDA XR50 MOTARD
By High-throttle-izing, the rally of an Axel was also lost and, also on the street, operation became easy. I want you to make a Grip into an option I praying. .
By High-throttle-izing, the rally of an Axel was also lost and, also on the street, operation became easy.
I want you to make a Grip into an option I praying.
.
View detail
A Handle feels it refreshed. Appearance is good. Although only anything will be fastened if the parts (if it is a goods photograph plated part) which merely fix an Axel Holder attach to a Handle, the crevice (1~2 mm) between some will be made. Mor
A Handle feels it refreshed.
Appearance is good.
Although only anything will be fastened if the parts (if it is a goods photograph plated part) which merely fix an Axel Holder attach to a Handle, the crevice (1~2 mm) between some will be made.
Moreover, I think that the direction where it was exchanged together with the experienced person can attach beginners to a Beauty as a result since a Wire for exclusive use is also required.
View detail
Fits: Others , HONDA APE 50, HONDA GORILLA, HONDA MONKEY
Since it says that it is general-purpose, it can use ordinarily. It purchased with DISC-izing of an APE this time [ ]. Since the goods themselves were made in Mukawa, it purchased in comfort. Kana which matter carries out, is, and just choo
Since it says that it is general-purpose, it can use ordinarily.
It purchased with DISC-izing of an APE this time [
].
Since the
goods themselves were made in Mukawa, it purchased in comfort.
Kana which
matter carries out, is, and just chooses the existence of a start switch if it says?
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA DAX, HONDA MONKEY, HONDA SUPER CUB110, HONDA CL50, HONDA DAX, HONDA DAX70, HONDA XR100MOTARD, HONDA XR50 MOTARD
[Webike Monitor] attachment is easy. The using feeling is also good touch.
[Webike Monitor]
attachment is easy.
The
using feeling is also good touch.
View detail
A feeling of a vintage comes out and the parenthesis of appearance is good!!! It changed into the grip of the chopper style together. An impression changes considerably only by feeling the circumference of a handle refreshed. Since a price is also
A feeling of a vintage comes out and the parenthesis of appearance is good!!! It changed into the grip of the chopper style together.
An impression changes considerably only by feeling the circumference of a handle refreshed.
Since a price is also handy, it is a recommend, and it is peevish, and w.
View detail
All also of a holder and an inner pipe are metal. Plating is also thick and has a high grade feeling very much. Since the holder was dramatically small, the diameter of rolling up of the wire did not become small, or it was anxious, but it was not
All also of a holder and an inner pipe are metal.
Plating is also thick and has a high grade feeling very much.
Since the holder was dramatically small, the diameter of rolling up of the wire did not become small, or it was anxious, but it was not different from normal.
A vehicle type is ST250.
Although it thinks as notes that most domestic cars are two by the side of influence and return, the number of wires is one, and in order that there may be no return side, you have to remove this holder.
In addition, since the bolt which attaches a holder to a handle was a type bound tight with my mass driver, torque was imposed and it was seldom bound tight.
Since there is also no baffle and it turned, it exchanged for the cap bolt.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA DAX, HONDA MONKEY, HONDA SUPER CUB110, HONDA CL50, HONDA DAX, HONDA DAX70, HONDA XR100MOTARD, HONDA XR50 MOTARD
Since-izing can be carried out [ high throttle ] in the throttle housing of normal, it is recommendation! Although an effect is there [ there ], since attachment is easy, I think that it is good for a high throttle introduction.
Since-izing can be carried out [ high throttle ] in the throttle housing of normal, it is recommendation! Although an effect is there [ there ], since attachment is easy, I think that it is good for a high throttle introduction. View detail