Reviews
I need an air vent.
If the air is not snapped when the Brake is bleed off, it is air remaining in the Master Cylinder. I tap it lightly, but it does not refreshing. It will eventually bleed out. It would be best to have an air bleeder. Also, the price is too expensive. This time, I used DAYTONA's Brake hose.:2pcHose slightly contact. View detail
Great product
I received these a couple of days ago from a Webike Japan and I must say I am very happy with the quality of the item, they are very well made and I would highly recommend them to anyone who is looking for brake banjo bolts like these,. Just to let anyone know that are thinking of buying these bleeders you can not go wrong with the product, the build quality is great and service and delivery times from Webike Japan are exceptional, I highly recommend this product. Steve Australia View detail
Stainless black
I am installing Stainless Steel, Black with matching pitches along with brembo installation. I would appreciate it if the price is lower. View detail
Cheap!
Titaniumium Bolt is available at a very low price!
Will buy again!
View detail
Banjo bolt you can trust.
This is a Banjo bolt from the Swage line.
(Although many people seem to use it without paying much attention to it.) In general, there are two types of Banjo thicknesses, but the Swage line is the so-called EarlsType.
The process for selecting a Banjo bolt is as follows
Swage line or Goodridge?
Aluminum or Stainless Steel?
Is the screw pitch 1.25 or 1.0?
Whether the tightening partner is brembo or not
is an option.
Personally, I prefer the Swage line for brake hose handling, so I'm basically a Swage line guy.
Also, aluminum has a lot of color options and is relatively inexpensive, but it's not strong enough to be used as a bolt, so I'm definitely in the stainless steel camp.
Pitch and length depend on what you are tightening.
So, in my case, if I choose the Banjo bolt in order, I will end up with this product.
In fact, I have used this product many times in the past, and I have never encountered any problems with it.
If I had to pick a Neck, it would be the price.
Many people use aluminum banjo bolts without thinking too much about it, but even though it's an M10, it's only capable of applying a torque of 10N-m or so.:I feel that aluminum is too unreliable as a fastening material.
This is a product that goes against the customist's mindset of being plain and expensive, but considering the importance of using it around the brakes, I strongly recommend using a reliable product like this one.
View detail
Blue
Blue looked beautiful, so we installed this one.
The color of the corners peeled off after a few times of tightening, which is not good.
View detail
brembo
I bought this product because it is compatible with the Brembo master and Pitch.
It's not bad for the price.
View detail
exchange
In conjunction with the replacement of the caliper, we replaced it with a brembo compatible one.
The color of the corners peeled off when tightening, and since it's aluminum, you have to be careful not to overtighten.
View detail
Black
We installed black brake hose to match the black brake hose.
The color is simple and I like the color, though it is not noticeable.
View detail
Screw Pitch should be checked.
I bought this for my XJR1200's RearBrake master cylinder and thought it was a 1.0 pitch because it was a brembo, but it was a 1.25 pitch. View detail
I'll be able to air it out!
[How is it used?
When I bought it as a used car, the brake fluid was replaced in the vehicle inspection maintenance, but when I applied the rear brake, the fee ring was not good, so I thought that I could do something about it. So I decided to replace it with Air Free Banjo Bolt which can remove air completely.
Was the one you received as per Image?
Exactly as seen in the product photos.
Was the installation difficult?
I took it into the shop and had them install it and do a thorough air bleed.
How was your experience with it?
It is true that the fee ring is improved, and the response when stepping on the pedal is drilled, but the brake braking force itself is probably almost the same.
[Included Parts:were they on?
It comes with one Gasket and one Rubber cap.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Brake fluid is also needed as it needs to be aired out. A quantity of 50ml is enough.
View detail
Required for NisshinHorizontal TypeMASTER
I was having a hard time bleeding the air out of the NisshinHorizontal TypeMaster Cylinder. When I used this Banjo bolt, air bleeding was finished without difficulty. The hose for air bleeding sticks firmly and does not come off easily. View detail
I replaced it with Brake hose.
The quality was satisfactory without any problems.
However, I felt the price was a bit expensive.
I also bought the ↓ Banjo adapter with it.
https://www.webike.net/sd/4465941/
View detail
Nice quality red anodizing not pink like some other brands
Nice quality red anodizing from Special Parts Takegawa not pink like some other brands. Light weight aluminium banjo bolt beautifully machined and finished to give my Honda Monkey 125 motorcycle that high end finish I am looking for. Pricing maybe slightly higher then a few other brands available here on Webike but like they always say, you get what you pay for. When working with anodized bolts like this I like to use single hex sockets to minimise the chance of damaging the coating and keep them looking as new after installed on my motorcycle. View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON DYNAFamily
Batch.
The texture and installation were perfect.
It's nice
View detail
color coordination
Brake hose color is replaced to match.
I'm not sure if this is a good idea or not, but it's a good idea. I'm not sure if I can help it.
View detail
Brake hose replacement
I bought this stainless black to replace the Buildaline brake hose with stainless black and to connect to the Brembo caliper.
It's pricier than Aluminum … but I had to do it to unify the two. It looks nice and I like it.
View detail
ActiveBanjo bolt
I didn't see the color you were looking for!
They had it here and I bought it immediately.
Very good with a wide range of products!
View detail
Caliper stainless steel banjo bolts
No point refitting those old OEM Suzuki steel banjo bolts when it comes time to change out the OEM rubber brake lines for some stainless steel braided brake lines from HEL Performance. The cost of these bolts are market priced and the quality is excellent with no complainants from me. When ordering replacement banjo bolts or bleeder screws just keep in mind there are different diameter and thread pitch bolts and screws available from Webike and make sure you know what your motorcycle needs. Installation is straight forward just fit new copper crush washers and tighten to the required torque as per OEM specifications. View detail
Fastener upgrade while swapping out brake lines
When the maintenance job came up to upgrade to stainless steel braided brake lines on my Suzuki SV650 it was a no brainer to also upgrade the master cylinder double banjo bolt. Braided brake lines from HEL performance were used so to was their fastener to eliminate the chance of introducing problems into the installation process. The stainless steel double banjo bolt is excellent quality and the price is reasonable. No hesitation to use HEL perforamnce products again in the future. Do not forget to replace the copper crush washers when doing a job like this to prevent the possibility of fluid leaks. View detail