Reviews
bremboBanjo bolt
Used for bremboCasting 4POTCaliper.
As expected from OEM Parts, no problems at all.
Brembo did not show any parts such as oil seals in Aftermarket parts, but Banjo did.
(Oil seal requires a twist to order)
View detail
Accuracy is high, quality is reliable!
[How is it used?
I bought this as a Repair for Brake hose banjo bolt.
Was the one you received as per Image?
The Screw section was as precise as the Image, and the coloring was of high quality.
Was the installation difficult?
Depending on the installation point, air bleeding may be required, but it is basically just a simple replacement.
How was your experience with it?
The sealing washer is not reusable, so I appreciate that it is included.
[Included Parts:were they on?
Sealing washer included.
[Was there anything that disappointed you?
Material:Although it is aluminum, it must be carefully installed and tightened or else it will cause wound and paint to peel off.
▼Material:Aluminum and Material:Stainless Steel is available, but Stainless Steel also corrodes in some cases, so this is a problem. Recently, Material:We are seeing a lot of Bolt in Titanium, which is more expensive but may be an option.
View detail
Used for Separator made by Active
If you use Separator, use this double bolt
Texture is fine.
Quantity when tightening:Care is taken to keep the 2pc Hose in place.
View detail
Tokico6pot
Also available for gpz900r OEMCaliper
I am satisfied with both the quality and the price.
View detail
To change the angle
Takekawa's dry method (Hydro) DAYTONA's Clutch from (Hydro) The angle of the release was changed with the change to the 17RHydroClutch, so the angle was adjusted with Mukawa's Fitting. The 17RHydroClutch from Mukawa is the same as the Slim line, so this fits. View detail
Please.
I ordered a single unit to replace the brake master, hose, bolt, etc., but it came with a double unit.
When I wanted to get a replacement from Webig, I emailed him and it took 6 days, then another few days for him to take a picture and check it out.
Before I could check the returned product, they sent it to me for Single and I managed to get it in time for Touring!
I want Manufacturer's product management to be very careful. If you tighten it without knowing, the MASTER side will break or Brake fluid will be leaked!
I am satisfied with the product as I have purchased it before.
I really wish you would give me a break.
View detail
It changed between bolt pitches. It was not noticed, but it became HAME which breaks, masters and buys Linda for fastening forcibly. I thought that what was necessary was just to have purchased the bolt of the smile stainless. (It was obsessed
It changed between bolt pitches.
It was not noticed, but it became HAME which breaks, masters and buys Linda for fastening forcibly.
I thought that what was necessary was just to have purchased the bolt of the smile stainless.
(It was obsessed with appearance.) I think that it is cheap well and they are good goods.
View detail
It is a stainless from aluminum in steel!
It is a stainless from aluminum in steel! View detail
A stainless is reliable too.
A stainless is reliable too. View detail
A stainless is safe too.
A stainless is safe too. View detail
oil cooler
About quality and texture The quality is good without oil spilling out About the feeling of use be of satisfactory quality Products to buy together SHIFT UP Aluminum Banjo Bolt M10/P1.25 Installed Together Difficulty of installation be as easy as pie Cost performance and comparison with other products The price is very good because it is a set of two About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing The price is better than anything else and the quality is excellent View detail
Used for Rear Sam Brake master
Rear master (Gail) It is easy to use because it is used for
Purchased this time with the addition of Sam Brake master.
Air removal is much easier.
View detail
Great Brake Bleeder Nipples
Have to say that I am very very happy with the product, these bleeders are beautiful in finish and looks, they work great not to mention the great looks they add to your bike, highly recommended, quick delivery from Webike Japan as well. Steve Brisbane Australia View detail
Brake Bleeders
Great product and very quick delivery from Webike Japan, have used these on my ZX14R Ninga and very happy with the finish of the product and the looks, very simple to use and makes bleeding your brakes a pleasure to do. Very quick delivery to Brisbane Australia, arrived in a couple of days via DHL, very happy and highly recommended. Steve Brisbane Australia View detail
More secure than Aluminum
I purchased this product because I need it for my StainlessCrimpType and Banjo adapter for my Universal hose from Buildaline.
Of course, it is more durable than aluminum and less likely to break over time.
2 Crash washers included are also a great value! (^^)
View detail
Also in Universal Product
I purchased this clutch cover to install an oil cooler on a Special clutch cover.
I thought about using a universal product, but since the oil cooler is also made by Takegawa, I decided to use this product to unify the two.
The degree of curvature is moderate and I am satisfied with both the quality and fitting.
Although it is slightly more expensive, I am satisfied with the fact that it is made by Mukawa.
However, it would be better if other colors were available.
View detail
Also in Universal Product
Installed on TakegawaSpecial clutch cover for APE.
I thought about using a universal product, but since I had prepared an oil cooler made by Takegawa, I decided to purchase the product in question anyway.
Naturally, there were no problems with quality or fitting, and the installation process was smooth.
However, I have heard Small ear that color fading occurs after long-term use, so I am concerned about that.
It would be better if other colors could be selected if possible.
View detail
Satisfied with Banjo bolt as expected
The Pitch of Active's GALE SPEED MASTER was 1.0, so I purchased this product.
I was able to choose Screw Pitch, which was very helpful.
As a Banjo bolt, it is a Standard product with no particular outstanding features.
It would be a good choice to match the coloring of the Brake line or the MASTER.
View detail
Banjo bolt as expected!
It is an ordinary Banjo bolt.
This time I wanted to keep the Caliper surroundings in Black and Silver, so I went with Black for the banjo bolt!
After installation, I'm very pleased, especially since the Fluid isn't leaking out!
View detail
Stainless Steel
I have a SteelBanjo bolt from OEM, but I decided to go with Stainless Steel because of its appearance. I have had some experience with aluminum bolts that have been broken off in my old Torque. View detail