Reviews
Though it is cheaper than other companies
I installed the Swage line for 14 Z 1000 ABS, but because I was exchanging it with Crab carry, the twist turned in the opposite direction.
By replacing this part it will be Crab carry correspondence.
View detail
For BREMBO Caliper.
【What made you decide the purchase?】
Because Brembo caliper is Up from the Caliper of NORMAL because the Fitting section is Up, Brake hose was quite impossible in Banjo.
【How was it actually used?】
Refreshing looks also makes Hose's handling better.
【Was it difficult to install? (Hard parts case)】
I made Stainless Steel in consideration of strength, so it was not easy to install it without much concern.
Pay attention to Caliper's Pitch and purchase.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Although it can be installed without Torque wrench, once it is the most important security part, I think whether you should ask Shop for those who are not confident.
Especially if Aluminum puts too much force, Screw mountain will be cut off, so if it seems to be tightened gradually and leaks, let's tighten up again.
Brake fluid damages paint so prepare water and let's work.
I think that it is better to wash the car after the work is done just in case.
[Is there anything I was disappointed about?]
None.
【Hope for Manufacturer - Please let me know if you have any improvement points]
None.
【Have you compared items?】
None.
[Others] Any item
View detail
To Nisshin's Master cylinder exchange
I bought it for exchange with Nisshin's semi radiator MASTER.
Since Brake line is made of PLOT, Banjo bolt also made PLOT.
The installation was also made Smooth.
View detail
I prepared for something unexpected situation
Along with the exchange of Brake hose, I purchased it as a spare so that even if an unexpected situation such as Washer's deficiency, defective item, installation mistake happened, etc.. I do not want the price to be Large, but I want you to wait for Washer to interrupt work.
Since nothing happened this time, it became a spare.
View detail
High Quality
Previously, when purchasing inexpensive Banjo at the Oakon station, it was tightly closed and broken.
Since then, I use a reliable Manufacturer, but I do not have any signs to break. I prefer Soda's Anodized, although it will be stronger than SUS.
Anodized is also firm, and there is no scratch of tightening. It is an article of Recommendation.
View detail
An Anodized is beautiful.
An Anodized is beautiful. View detail
[Webike Monitor] Although the Front fender of the Magical racing was purchased before , it was in the state which there is no hole for Brake-hose fixation, and cannot be fixed. It was the Hose clamp of this PLOT which it is searching with whethe
[Webike Monitor] Although the Front fender of the Magical racing was purchased before
, it was in the state which there is no hole for Brake-hose fixation, and cannot be fixed.
It was the Hose clamp of this PLOT which it is searching with whether there are any good things, and was found.
The direction of
attachment was sewn up using the Bolt of M6 from the inner side of the Fender.
The rubber washer was put in between the
Fender and the Clamp, and it loosened, and considered it as crack prevention of and [ prevention ] and a Fender.
I think that the Matching also came out perfectly using the thing of the company, and Hose fixation of the
Rubber Bush on a Fender was completed finely.
View detail
[Webike Monitor] Although the Banjo bolt made from an Aluminum was used the start of , since it was felt uneasy in intensity, it exchanged for the thing made from a STAINLESS STEEL. It is a top for whether your being Haruka from the thing o
[Webike Monitor] Although the Banjo bolt made from an Aluminum was used the start of
, since it was felt uneasy in intensity, it exchanged for the thing made from a STAINLESS STEEL.
It is a top for whether your being Haruka from the thing of the product [ sense of security / at the time of bolting ] made from an Aluminum too.
Since
bolting Torque was also written on the back side of a box, it was able to bind tight with the Torque wrench in comfort.
if
price is compared with the product made from an Aluminum, quantity is a little -- it is -- although -- isn't that which durability also says intensity with last thing a Merit made from a STAINLESS STEEL?
.
.
View detail
Since there are 2 Hoses in the circumference of a Front, he would like to collect, and it purchases. Although ordinarily collected by the Cable tie, a Parenthesis of appearance is bad and the circumference of this and an after- exchange Fro
Since there are 2 Hoses in the circumference of a Front, he would like to collect, and it purchases.
Although ordinarily collected by the Cable tie, a Parenthesis of appearance is bad and the circumference of this and an after-
exchange Front is becoming beautiful much more.
View detail
I got DISC-izing of a MONKEY, and hydraulic-clutch-ization to let it use considerably. The color also has a kind and it can use it also for a Dress-up of a car body up in combination. It is slightly regrettable that the Lineup of a color is differen
I got DISC-izing of a MONKEY, and hydraulic-clutch-ization to let it use considerably.
The
color also has a kind and it can use it also for a Dress-up of a car body up in combination.
It is slightly regrettable that the Lineup of a color is different by the object for
Nisshins and the object for bremboes.
I want you to also take out gold like the object for
bremboes -- ~
View detail
It is used for the oil-pressure relation of a MONKEY. As convenient as , since the oil-pressure-related Torque is indicated in Mr. PLOT's Package. We recommend you for one to take a Package. The Plating of the Banjo adapter is rec
It is used for the oil-pressure relation of a MONKEY.
As convenient as
, since the oil-pressure-related Torque is indicated in Mr.
PLOT's Package.
We recommend you for one to take a Package.
The Plating of the
Banjo adapter is recommended.
It is since it is very beautiful....
View detail
It purchases collectively at the time of a Clutch master and Hose exchange. Since it is the Clutch side, gold is chosen because an Aluminum will be enough as construction material. Since the Fitting of a Hose is Kurogane, a sense of togetherness has
It purchases collectively at the time of a Clutch master and Hose exchange.
Since it is the
Clutch side, gold is chosen because an Aluminum will be enough as construction material.
Since the Fitting of a Hose is Kurogane, a sense of togetherness has no complaint.
Since a Banjo is attached to the bottom, the
Brembo radial is not visible from a riding posture, but smartness is the highest when it looks in from the bottom (smile).
View detail
[Webike Monitor] When the Handle of the GSX1300R HAYABUSA was changed into POLICE III, extended and attached the Kit of the Stainless Hose for the GSX1300R HAYABUSAs of the Manufacturer, but. Since the Hose of a Clutch and a Brake interfered in the H
[Webike Monitor] When the Handle of the
GSX1300R HAYABUSA was changed into POLICE III, extended and attached the Kit of the Stainless Hose for the GSX1300R HAYABUSAs of the Manufacturer, but.
Since the Hose of a Clutch and a Brake interfered in the Handle and the Lever was somewhat higher than liking, BA614 and BA615 were purchased and both were exchanged.
By the time the
result is brilliant, it is a good angle, and it was also able to lower the lever position to favorite height.
It purchased too and was a correct answer.
On the occasion of it and exchange, since a Crash washer also serves as new article exchange, ESP302 has been purchased.
Thank you for the goods
PLOT [ Mr. ]
Considerate.
View detail
20 degrees wide were purchased so that the fixed Bolt of a RADIAL CALIPER might not be, br > interfere immediately near the van Show Bolt.You are polite, and Anodized processing does not have a Fluid leak, either, and is good.
20 degrees wide were purchased so that the fixed Bolt of a RADIAL CALIPER might not be, br > interfere immediately near the van Show Bolt.You are polite, and
Anodized processing does not have a Fluid leak, either, and is good.
View detail
Intensity was considered, and since the product made from a STAINLESS STEEL was a portion which always stands out in the circumference of having wanted, and , especially a Handle, the brand item was chosen. Unlike goods of inferior quality, the s
Intensity was considered, and since the product made from a STAINLESS STEEL was a portion which always stands out in the circumference of having wanted, and
, especially a Handle, the brand item was chosen.
Unlike
goods of inferior quality, the surface of parts does not have a crack, either, and is beveled firmly, and the
Designs are also good goods.
View detail
Since decoloring of the anodized made from aluminum was not pleasing, the stainless was chosen. It is simpler and cool to use this adapters at the time of hose exchange, rather than exchanging with a banjo and bolt. It is a recommend.
Since decoloring of the anodized made from aluminum was not pleasing, the stainless was chosen. It is simpler and cool to use this adapters at the time of hose exchange, rather than exchanging with a banjo and bolt. It is a recommend. View detail
Since the Brake master of a Beringer became the management from the upper part unlike a brembo, a Nisshin, etc., it purchased this 90-degree Long. management is settled shapely and is very satisfactory. Moreover, since it is a Stainless, it is very
Since the Brake master of a Beringer became the management from the upper part unlike a brembo, a Nisshin, etc., it purchased this 90-degree Long.
management is settled shapely and is very satisfactory.
Moreover, since it is a Stainless, it is very safe.
When attaching the MASTER of
* (cautions) Beringer, in the case of those who lower the lappet angle of a MASTER with all their might, in CBR, interference of a Front fork and a Hose-fitting portion was likely to occur.
(Although its master was attached on the lappet square of about 40 degrees and did not have a problem, it was a Limit ...)
View detail
Although purchased for die-length fine adjustment of a Swage line, management went finely unexpectedly. It can attach straightly finely, without the Banjo's combining and Lines interfering by order. Since it can think and attach with itself, a degre
Although purchased for die-length fine adjustment of a Swage line, management went finely unexpectedly.
It can attach straightly finely, without the
Banjo's combining and Lines interfering by order.
Since it can think and attach with itself, a degree of satisfaction and pleasure are also UP(s)!
They are considerate goods. [
]
View detail
It purchases simultaneously with Brembo-radial purchase. Although the black Banjo was attached also to the MASTER, it excited to stainless brightness too. Since the Aluminum cannot trust itself, he is always a Stainless. [ ]
It purchases simultaneously with Brembo-radial purchase.
Although the black Banjo was attached also to the MASTER, it excited to stainless brightness too.
Since the Aluminum cannot trust itself, he is always a Stainless. [
]
View detail
Since there was no adapters for bremboes, it purchased. It is strong although it is heavier than the thing of aluminum because of a stainless. Moreover, since there is also no bald of paint application like aluminum, it can turn by a wrench freely
Since there was no adapters for bremboes, it purchased.
It is strong although it is heavier than the thing of aluminum because of a stainless.
Moreover, since there is also no bald of paint application like aluminum, it can turn by a wrench freely.
View detail