Reviews
Thick Washer
The combination of apRACINGCP2696 and High spec lineBrake hose caused the banjo bolt to bottom out, so this thicker product was used to successfully avoid bottoming out.
It is expensive, perhaps because of its thickness.
View detail
The design is good and Brake's Touch is very good?
Low price and easy to handle?
BrakeTouch is good and easy to control?
I think it is a good first Custom for beginners.
View detail
As for performance differences?
The only performance difference is honestly Hose.
I am not sure. I just know that OEMs are
It looks much shabbier when it's old.
It is good for a change of color because it becomes
View detail
Brake line Custom
The instructions are easy to follow and the exclusive design makes it easy to install. View detail
Replace when retightening Banjo bolt.
[How is it used?
Used to replace the brake master cylinder.
How was your experience with it?
Material:There are aluminum crush washers available, but since this is not a part that is replaced frequently, we used a copper crush washer this time for durability. To be honest, the crash washer does not make any difference, so I have been able to use it without any leakage from the banjo bolt.
Quantity as a spare because I was planning to take the brake hose off and on in the future.:I bought 1 set of 10pcs. but it is still cheap so I think it is good to have a lot of them.
How did it compare to other products?
I have done spec. for other companies' products, but I don't think there is any particular large difference.
[Points to note]
Be careful with Torque when tightening, and if the same Washer is used many times, it will be crushed and not airtight.
View detail
Includes Fluid Fluid and a very easy-to-understand Instruction Manual!
As stated in the Title. Includes Fluid Fluid and a very easy-to-understand Instruction Manual. It is
Fluid liquid is left over if it is sold separately, which is wasteful… and the instruction manual is very
It's detailed and UserFriendly!
Bottom line, it performs, but it's pretty Touch! Pushing! A reliable fee ring with a high degree of accuracy.
Good stuff, and the Design is great! Material:It is not Stainless Steel. I'd be worried if it broke."
I thought it would be a bit too big, but it is sturdy and will probably last 10 years if stored properly and not ridden in the rain.
It's Recommendation!
View detail
I wanted a 10° Banjo adapter.
Used to convert CB750F front brake from W piping to OEM piping.
I wanted 10° to match the angle of the OEMHose banjo when branching on the OEM TwoWayJoint, but as far as I could find, this is the only place I could find.
When I actually try to install it, Straight seems to interfere with the Fender, and 20° swings too far outward and looks bad.
So 10° here was the right choice.
I am not particularly particular about Manufacturer, but I am sure that Swage line can provide quality.
View detail
EXACTLY!
The creation is beautiful, even the NISSIN Radial master cylinder could be installed without any problem. View detail
Safe and secure
As an amateur, I chose this hose because there is no difference in the large fee ring compared to other companies' products, and I prefer the color of the fitting and the angle of the banjo. I like the fact that the recent Mesh hose is designed to prevent the hose from twisting during installation. If I wanted to make it 30mm shorter, it would not be a problem for safety because the suspension is fully extended. View detail
I was satisfied with the Large change.
The touch of the Brake is a little tightly, and the Breaking of the startup repair during the Corner ring has been made easier. View detail
I would like a little more length.
The hose on the master cylinder side needs to be 20mm longer. The rest is perfect, the compatibility with NISSIN Radial master cylinder is good, and the control during the corner ring can be done delicately. View detail
perfectly
[How is it used?
Sometimes Circuit
Was the one you received as per Image?
Almost exactly as in the Image
Was the installation difficult?
I was careful to replace it without dripping Fluid.
How was your experience with it?
OEM Brejo's unreliable Touch improves
View detail
swage-line brake hose kit
Hello Webike is like a friend now. I was dissatisfied with the pure horse Performance, looks, look. I was just looking for one that fits the cb400sfrevo As expected, the swage-line was of course I installed it as soon as I got it Wow! It's so beautiful It feels like the braking performance has gone up a notch I strongly recommend it View detail
Swage-line brake hose kit by vehicle type
Hello I was always dissatisfied with the pure brake hose The limits of pure love are clear. So what I found was also a swage-line As expected, I ordered it right away I don't hesitate I installed it as soon as I got it The 19-year-old Levora rear hose was short The product was 14-17 years old On the WeBike, it's written in the year 14-21 I need to fix it I ordered it from Plot Korea and fortunately, it could be installed I'm generally satisfied Thank you. View detail
Safe and reliable
Installed on a GSX-R1000R 2019
I purchased this product to replace the hose with a new front brake caliper.
Although many people do not pay much attention to it, there is a standard for banjo thickness.
Swage line is generally called EarlsType, which is a thicker banjo type.
Swage line and Goodridge are the most likely to be available in stores. (ACTIVE) However, since these are thin banjo thickness standards, the positional relationship between the oil holes in the banjo bolt and the banjo will be strange if they are mixed together, so care must be taken.
In particular, double banjo bolts like this product require twice the amount of Gap.
There is no doubt as to what it is.
However, the Material:Is the strength low for Stainless Steel, or is the allowable tightening Torque of the PLOT instruction low for SEA BASSOEM's Banjo bolt, so what to believe requires careful consideration.
Since the brake line is a very serious part of the brake line, it is safe to use a well-known product such as this one.
View detail
Safe and reliable
Installed on a GSX-R1000R 2019
I purchased this product to replace the front brake caliper.
Safe and reliable Swage line Material:Stainless SteelBanjo.
There is a standard for banjo thickness, although many people do not seem to care much about it.
Swage line is a Banjo wide standard commonly referred to as EarlsType.
Highly available in stores is Swage line's Goodridge (ACTIVE) However, if these banjo/banjo bolts are mixed, the position of the oil hole on the banjo bolt side and the groove on the banjo will be misaligned, and this can be detrimental.
Personally, I am familiar with Stainless Steel from Su Wedge because I use it every time I replace the Hose, but it is still a pretty good price for a Neck.
Banjo basically requires ×2 Hose, so when you add the necessary amount to your shopping cart, the total amount will swell to quite a Gold amount.
The product is very good, so it would be great if the price could be reduced a little more.
Nevertheless, this may also be the price of trust.
View detail
Exclusive products after all
Motorcycle with unusual handling like this after all. (dTRACKER) I thought it would be best to buy a dedicated product. I used to buy a Universal Product from Yahoo! Auctions and installed it, but the front is inverted, so the handling is a little different. It is long. The one I bought this time has a coated part to fix the hose by inserting it in the middle, and it was really a simple installation! The length and angle of the fitting is NORMAL, and I think this one is better than the Universal Product, even if it costs 3-5,000 yen more.
And maybe this is just me, but … I enjoy removing the air after installation - I'm a pervert who likes to watch the air come out or Large.
View detail
No complaints
Brake works better now.
This is a quintessential Large Hand Manufacture product.
View detail
Tentatively
It is a quintessential Large Hand Manufacturer.
I have no complaints, I bought the Smoked hose.
I am worried about the color fading.
View detail
Brake I like the choice of hose length.
Product Name
SWAGE-LINE Swage line SWAGE-LINE Easy Order Brake Hose
Item Number
BAKB-1010M
Vehicles
GIORCUB
Number of man-hours
About 2 hours
Why did you choose this product?
I was looking for a Brake hose with a choice of lengths due to discing the GIORCUB.
In addition, I will be using the Adapter in a special way, changing its angle as I like, so I had to choose Swage line's EasyHose this time.
Impressions after using it
First of all, discing a GIORCUB with a drum brake is a special case in itself, so please look at it only as a reference regarding impressions.
The object itself is an ordinary mesh hose.
As for the color, we wanted it to look as OEM as possible, so we went with Black.
As for the installation, it was just thin enough to crawl inside the Scooter without Space, so that was an unexpected byproduct.
As for the Touch, I don't know what it is because I bought it for the disc conversion and I don't know the OEM, but I feel it is tightly. (I think it might be a Brush-boat, since it is transmitting power to the MASTER by changing the Wire like the DIO-Z4).
Also, it was difficult to release air due to the handling, and the air removal process was extremely difficult, so I don't want to do it for the time being.
▼ Attention
If you use it as usual, there is no problem.
View detail