Reviews
Ideal for a little night work, etc.
The one I've got now is a three-pronged rubbery thing.
Use the headwear type.
It's cheap, and I'm not sure I'd want to tuck it into the brim of my hat.
Thoughts and purchases.
The light source can't illuminate far and bright.
It's not a problem as long as it's at your feet or at eye level for a bit of walking.
A little work at night, fishing or camping
It looks good for things like
Quantity Button Battery:2pc. Set used. It's not something I use every day.
I don't know how long it will last, but I'm sure it will work.
I think it's good
The only thing that bothers me is the fact that the battery cover latches on.
It took me a while to get it off. It may be an individual difference.
View detail
ได้รับของเป็นที่เรียบร้อยทดลองใช้ งานเป็นไปตามที่ต้องการ ถูกใจมาก ได้ของคุณภาพดี มีโอกาศ จะต้องได้ใช้บริการอีกแน่นอนครับ View detail
Good for private use.
TouringMotorcycle and Motocrosser maintenance, daily DIY for others, etc... I chose this 100mm size because of its compactness. I think it is enough for normal motorcycle maintenance.
It comes with a case, but I don't use it because I think that it is a synthetic leather one and probably will be torn soon after using it. I stick it to Magnet holder and keep the usual storage.
The appearance is beautifully made. However, the feeling of use is not comfortable as I am using Mitutoyo's Caliper in my office. I have been using it for about three years and there is neither damage nor rust at all.
View detail
Unused, but I'm sure it's good.
I honestly don't know much about it, as it has not been used.
However, the Phillips Screwdriver was very easy to use and I believe you will like this product wonderfully as well.
We believe that the product is as perfect as its name suggests.
View detail
Overpriced. Easy enough to use.
I used to use a K*C Socket adapter, but I crushed it because I was forced to use it too much, so I bought it instead.
It's cheap, but I've been able to put it on and off, Wobble etc., with no problems at all.
But I've reflected on the quicksand, so I don't use it unreasonably anymore.
The problem is that it was difficult to remove the product from the package. It's not easy to remove the product from the package because it's firmly attached to the package.
View detail
Convenient
Material with the common minus cut:Plastic's Oil Filler Cap is good for turning. But most importantly, Material:Large thing to turn Plastic's Oil Filler Cap is that the said Cap Heat and heat when turning an oil replacement old, resin filler cap when turning a cap. It will certainly lick if it is. Be careful. View detail
Easy to use for Motorcycle Maintenance
When changing the air filter on your motorcycle, you can use the
The three screws on the Air Filter Box from the reverse side.
I bought this because I wanted a long driver that needs to be loosened and removed.
Air FilterQuantity because of the long Driver:Pair (for Left and Right) From the other side.
It is possible to cross underneath the tank and loosen the Screw so
I was able to do the job without dropping the small screw and was very happy with the work.
View detail
The Generalator Cover's PointCheck
My Motorcycle has only one point that uses the Coin driver, and it's not particularly I hadn't had one before because I hadn't felt the need to
However, when I try to tamper with it, it just doesn't work It is called "Coin driver", so I tried to use Angirasu to grab a small coin and run it around However, the one yen coin was twisted, and although I managed to use the 500-yen coin, it was distorted, and I had to use the automatic operation It is no longer available in the vending machine
Since I don't have a $500 coin in my pocket so conveniently, I decided to buy a special tool
It's different, isn't it? It's so easy to open and close and is stress-free It was
However, it is a tool that you may use once a year
View detail
No worries!
Quantity as I did not have the tools:I was looking for a set tool.
I purchased this product because of the number of items and the cost performance.
I have a full range of maintenance that I could do myself.
I'm thinking of buying a new special tool.
View detail
Is the costumer a good one?
When replacing the STREET TRIPLERS' Handlebar, the Switch box is The Bolt that I'm using is Torque's T8, and I didn't have the corresponding tool, so I bought it this time and used it I did
I wish I only had the T8, but if you buy it with a SocketSingle Body, it's almost $1,000 So, if you want to use Quantity:I bought this product to buy it as a set
Quantity:Considering it's a Set, I wonder if this price is cheap?
Quantity:The Size of the Set is set to T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 And I think it's Size from T10 upwards that I often use To be honest, I do not know where to use Smaller than T8 I'll assume it's yada
Speaking of Small Dice, this product is even smaller than I thought it would be, and for some people, it's hard to hold It might be hard to use
View detail
A must for Garage
I put a workbench in my Garage and I wanted to fix things in place and process them, so I installed this Vise If it is the work of motorcycle, it works well enough with this much Vise Because it is possible to burn with Burner, it is very useful to fix the bent Lever I am! View detail
Adapter
Size conversion adapter for RatchetSocket
Purchased for automotive tools
An Adapter that works well enough without feeling cheap
I think it's convenient to have it for different purposes, to carry it around, and to have a low Shock price in case it gets lost
View detail
To the thickness that cannot be tapped, etc
I often use a nutter for something so thick that the Tap can't cut it
Thin plates can be fixed with a bolt nut, but you can also set up a bracket on a frame or other parts The best place to do this is usually with a co-tightening on the Bolt somewhere, but it's not the best place Sometimes you really want a Screw hole
If you have one, it's a necessity because it's useful for anything and we often do diversionary parts
But even with M5, you can drill a pre-drilled hole of about Φ7, so consider the strength of the hole, depending on the location And if the hole you drilled is Steel, it's best to paint it to prevent rust
View detail
In-vehicle tools
Carry Bit, Socket and Ratchet wrenches in the Compact
HexBit and Screwdriver Bit in a bit holder for on-board tools
Holds size socket wrenches for use as socket holders
Ratchet, of course, Webike Garage We-BigGarage:Flexible Compact Ratchet is the way to go!
View detail
To measure the remaining pad level, etc
I bought it to measure the amount of brake pads remaining
(Of course, you can also use it to measure other thicknesses.)
I chose the 100mm size, but I think this is enough
It's something I'd like to bring a bottle of in the family
I think it's affordable and easy to buy
By the way, it came with a leather case
View detail
Use with the Breather Hose 650mm 6mm Diameter
Used when installing the Breather Hose 650mm 6mm Diameter
I don't have any problems with it, and it's working well
I had a lot of sizes to choose from, so I will be purchasing these again when I need them
View detail
Very easy to turn.
I bought this because I needed a Driver that was long and had a good grip for cleaning the exhaust fan.
I was very surprised at the ease of turning the Screw.
Not because it's long, or because it's the right Size, but because the oddly shaped tips fit and were painless to loosen and tighten.
I have no idea what the mechanism is, but for some reason it was easy to put force into it and turn it, not because of the Level issue of being able to turn a licked Screw mountain or being able to hit it with a Hammer because it's a direct line system. I think the grip and the tip of the blade are good.
Anyway, it's a good Driver to buy.
View detail
Case is included.
I felt it was more expensive than other brands, but I didn't know what to expect, but I chose the brand I often see at Home center etc.
I don't know the accuracy etc. because I'm a layman, but the memory and the cutting edge (?) I get the impression that it's beautiful.
Like any Caliper, I'm sure, you can not only measure the outer and inner diameter, but you can also measure the depth (butt?). ), which is very useful.
It's hard to see from the picture, but it has a synthetic leather case to hold the Caliper.
If it's this long and slender with a sharp point, it may have trouble breaking, bending, and stabbing, etc., but you can store it with the Case, etc.
View detail
Finally I bought it
I've been wanting to buy one for a long time, but I didn't get around to it, but recently I finally did It's not likely to be used very often, but it seems to be effective when you want to work in a narrow space or turn it quickly It seems not to have many appearances, but it seems to be effective in working in a narrow space or when you want to turn it quickly I'm sure there are better and more expensive ones out there, but for me, this is good enough View detail
Cospa is good
I used to use a 36 pile Ratchet Handlebar that I purchased at Home center It has a small head and the 72 mountain is very comfortable to use and I like it It's also very comfortable to use:Pair (for Left and Right) I like the fact that the rotation switch Lever doesn't move when you touch it when you are turning it I use it often The good stuff I thought it would be a good choice, but I'm happy with how it feels at this price without the luxury View detail