Reviews
Fits: HONDA MONKEY125, HONDA LEAD125, HONDA ZOOMER-X (ZOOMER), HONDA XR50 Motard (MOTARD), HONDA XR50 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XL230, HONDA Sh mode (MODE), HONDA PCX150 <ABS>., HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX Special Edition, HONDA PCX HYBRID(Hybrid), HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX
Good quality front fork dust seals!
These NTB Front Fork Dust Seals for the Honda MSX/GROM seem to be at least as good quality as the Honda OEM ones at a much lower price than the original ones! Recomended. View detail
Fits: HONDA FTR, HONDA FTR, HONDA CB900, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA CBR400R Limited Edition, HONDA CBR400R, HONDA CBR250RR (ABS), HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., HONDA CBR250RR, HONDA FTR, HONDA CBR250RR
OEM Product Quality NTB of the same etc.
NTB has a proven track record in automotive parts.
The quality is the same as OEM parts, but the price is low and Wallet-friendly.
No problems with installation.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90
Satisfied enough if you don't mention details.
The OEM side cover had cracked and fallen off sometime due to age-related deterioration.
The one that came with it was White with IonCrack like grain, so I had a hunch it was finally the day.
I didn't want to run with the battery exposed, so I ordered the NTB side cover that I had been eyeing beforehand. The reason why I chose Other Brand Product over Honda OEM is because the price is more wallet-friendly than OEM parts, and the stock is available and the delivery time is short. The most important reason is that the Front Fender I replaced before had a longer IonCrack time than the OEM.
When the actual product arrives, it is clear that the thickness of the material is modest. However, the fit is not bad, and the distortion is not a concern, and it is not a part that needs strength, so I think this is OK.
I know that NORMAL supremacists may snicker at me, but I only want practicality from my CUB, so this is good enough for me. It was a good purchase for me.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50
Better than I expected.
The Side cover on the Right Side cracked and fell off and was replaced by an NTBSide cover, so the Quantity:Pair (for Left and Right) I don't want the Left to be an unintended color difference, and if the Right is cracked, the Left won't be for long, so I decided to replace it together.
The OEM side cover came in White, but NTB offers only Cosmic Blue and Aba green, so I chose Blue, the same color as the car body. I chose the same color as the car body, Blue, because NTB only offers Cosmic Blue and Aba green. Well, it is natural that the newer the model year, the more the color scheme will be the same.
The mounting screws are ported from the original side cover. It is not a particularly important work.
The fit is good, and so far, no one has asked me why I used external parts.
From my experience, the NB exterior is more durable to IonCrack than HondaOEM, so if you are not particular about OEM, you should use it.
View detail
Soft, flexible and easy to use!
The material is soft and easy to put in and out of the wiring. It is also resistant to deterioration even when exposed to ultraviolet rays! It is easy to use, durable and Large satisfaction! View detail
Fits: HONDA FUSION SE, HONDA XR400 Motard (MOTARD), HONDA XR400 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XR230 Motard (MOTARD), HONDA XR230 Motard (MOTARD), HONDA XR230, HONDA XR230, HONDA XR230, HONDA XR BAJA (BAJA), HONDA XR BAJA (BAJA), HONDA SL230, HONDA SL230, HONDA SL230, HONDA PS250
It was able to be used without problems
I used it on my FTR223 and had no problem with the size feel. View detail
NTBBrake Pads
Purchased as Brake Pads for use with TOKICO 2-pot Caliper
This Caliper is used in Kawasaki's KX85 and SUPER SHERPA, find and buy a Pad for SUPER SHERPA!
This Caliper can be attached to SUZUKI's ADDRESS V100, and the actual vehicle used is the ADDRESS V100.
The price is low, but it worked fine.
View detail
Uncoated and used
I wanted the high seat set up on the Z125, but it was about 30,000 on ebay!
I couldn't afford that kind of price for Seat in SL, so I made it myself.
Ancho is a 20mm thick Sponge sold in Jungle for about 600 yen, OriginalCover is removed and glued.
Shave it with a grater Gold to shape it and cover it with this product.
The SIDE of the original anchor was cut off to fit.
The surface of the Seat has a non-slip Tank Pad-like texture, and the Grip has been increased.
The OEM has a glued front edge corner so it fits better, but this product has a thicker fabric and sewn finish so the corner fit is a little worse, although it is not very visible once installed.
Also, the anchored area interfered a little with the Rear Sets and I had to push it in quite a bit to get it to lock.
I think the price is low enough for the front and back, but I only used the front, so it would have been even better if the price was lower for the front and back separately.
View detail
Fits: SUZUKI Lets (LETS), SUZUKI Lets (LETS), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets G (LETS G), SUZUKI Lets(LETS)
If it tears, replace it immediately.
SEA BASSLETS CA4AA Purchased to replace a tear in my H30 Seat due to age.
It is inexpensive to buy, and if you see signs of tearing, you should replace the Cushion's Urethane before the rain gets to it.
Unlike OEM, there are seams everywhere. OEM is completely seamless.
If there is concern about flooding through the seams, we recommend replacing the entire unit with OEMSeat.
Some prep work is required to increase Waterproofness.
(Seams are treated with Coking from the back, wrapped with WaterproofSeat and then installed. (The last step is to wrap the seam with WaterproofSeat and apply WaterproofSpray.)
The product is folded upon arrival, so we would like time to stretch it a bit.
You may want to schedule enough time to hang the aforementioned seam Coking until it dries.
Minor wrinkles in the product will disappear as it is pulled when applied.
You may notice Large cross fold creases as shown in the photo, but they disappeared within a week of practical use.
If the actual reupholstering process is followed as described on NTB's website, even beginners can achieve a relatively good finish.
It is for beginners because it is not a one-shot game and can be redone several times.
Even without an Air Tucker, a commercially available Gun Tucker can be used for hammering if pressed firmly enough.
However, be careful with the length of the wick leg; 8mm will cause it to penetrate and prick the leg.
It was just barely 6mm foot.
View detail
Fits: HONDA Live Dio (LIVE DIO), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LEAD90 (LEAD), HONDA LEAD90 (LEAD), HONDA LEAD90 (LEAD), HONDA LEAD50 (LEAD), HONDA LEAD50 (LEAD), HONDA just (JUST), HONDA Julio (JULIO), HONDA Julio (JULIO), HONDA GYRO X (GYRO Postal Service), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X), HONDA GYRO X (GYRO X)
CANOPY Brake switch replacement
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
The replacement work was based on a You Tube video.
View detail
Necessities
DrainWasher of essential items when changing oil.Quantity:1 Set of 10pcs. so each replacement costs about 73 yen. We avoid using this all the time.:Since it is aluminum, it feels good to crush it when tightened with Wrench. View detail
Fits: HONDA FUSION SE, HONDA XR400 Motard (MOTARD), HONDA XR400 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XR230 Motard (MOTARD), HONDA XR230 Motard (MOTARD), HONDA XR230, HONDA XR230, HONDA XR230, HONDA XR BAJA (BAJA), HONDA XR BAJA (BAJA), HONDA SL230, HONDA SL230, HONDA SL230, HONDA PS250
It worked fine.
No gasoline leaks, etc., and it fits perfectly. View detail
Fits: KAWASAKI FX400R, KAWASAKI FX400R, KAWASAKI GPZ400R, KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI Zr-7., KAWASAKI Zr-7.
I thought the performance would be the same as OEM...
It looks exactly the same as the OEM Product and is the same size as the OEM Product, but the performance...I don't know yet. View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA CBX125C, HONDA CBX125C, HONDA CBX125C, HONDA CBX125F, HONDA CBX125F, HONDA MBX125, HONDA MBX50, HONDA NS50F, HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA NS-1, HONDA REBEL (REBEL), HONDA REBEL (REBEL), HONDA REBEL (REBEL)
I don't think there's anything wrong with the efficacy at all.
I don't know if it's dull or not, I switched from Metallica and I can't tell the difference. View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL500, HONDA REBEL250, HONDA MONKEY125, HONDA X-11., HONDA XL230, HONDA Xelvis (XELVIS), HONDA X4, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA V-TWIN MAGNA (TWIN MAGNA), HONDA VTR-F, HONDA VTR Type LD, HONDA VTR, HONDA VT750S, HONDA VT400S, HONDA VT250 SPADA (VT250 SPADA), HONDA VRX Roadster (R100 ROADSTER), HONDA VFR <ABS> and SPECIAL
Rubber added to Change Pedal for off-road motorcycle
I have been riding motorcycles for almost 50 years and have ridden more than 20 motorcycles, but recently I bought my first 2nd off-road motorcycle by Ponhang. Change pedal is a cylindrical piece of steel, Brake pedal is made of GizaGiza steel, Kick pedal has no rubber. Kick pedal has no rubber. Everywhere you go, shoes get scratched, soles hurt, and Kick pedals slip if you're not careful. In addition, they only stick to the toes. I have never ridden a motorcycle with such a bad footing.
As I wondered why anyone would buy such a thing, it occurred to me that I had bought an off-road vehicle even though I had no intention of driving on mountain roads at all. When I bought a KS-2 a while ago, it was still cute, so I could forgive the similarities, but this KMX125 is bare of ironiness and cheap plastic here and there.
I bought this rubber because I thought it would be easy to fit a thicker cylindrical Change pedal to prevent the toes of Sneakers from getting scratched. I burned an iron rod to a bright red color and inserted it into a new Change rubber several times to make the hole larger.
I don't know how long it will last, but I think it will keep the toes of my shoes from being damaged. By the way, I have a better one installed on my Harley883 that wraps around with Magic tape. This one is Ponhang's, so I think this will be just fine.
View detail
Fits: HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET
Honda hornet CB250F6/F7
This is specially for honda hornet late version cb250 F6/F7 two tone seat cover (same as genuine). Good quality Japanese material & fabric.neatly fitted to the seat base.each edges and corners are perfectly fitted without any modification. Highly recommended for hornet lovers. View detail
Fits: YAMAHA FZR250R, YAMAHA FZR250R, YAMAHA TMAX 500 (T-Max), YAMAHA R1-Z, YAMAHA FZX750, YAMAHA FZX750, YAMAHA FZR250R
About Order to Delivery
I was assured that Status would be in touch with me as needed, in detail from the time of order to the completion of delivery. View detail
Fits: HONDA SUPER CUB 50 MD (Postal Service), HONDA SUPER CUB 50 60th Anniversary/STREET, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 110 PRO, HONDA SUPER CUB 110 60th Anniversary/STREET, HONDA SUPER CUB 110, HONDA CROSS CUB50, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA X-ADV, HONDA X-ADV, HONDA X-ADV, HONDA NC750X Type LD Dual Clutch Transmission <ABS>., HONDA NC750X Dual Clutch Transmission <ABS> E Package, HONDA NC750X Dual Clutch Transmission <ABS> E Package, HONDA NC750X Dual Clutch Transmission <ABS>., HONDA NC750X Dual Clutch Transmission <ABS>., HONDA NC750S Dual Clutch Transmission <ABS> and E Package
Cospar good
I don't feel any special effect.
Cospa is good
View detail
Fits: KAWASAKI EPSILON 150 (Epsilon), SUZUKI ADDRESS (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS 110 (Address), SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V100 (Address), SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125, SUZUKI ADDRESS V125 (Address), SUZUKI ADDRESS V125S, SUZUKI ADDRESS V125S, SUZUKI ADDRESS V50 (Address), SUZUKI AVENIS 150 (Avenisu), SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIS (LETS Two S)
For replacement
I was worried because the price was low, but it worked.
It is a consumable item, so it would be nice to be able to buy it at this price.
It is not used for circuit etc., so I think it is sufficient.
View detail
Quickly!
We arrived today and for the time being, we exchanged ?Head Gasket of the middle Cylinder that is missing Gas.
Currently, there are no problems, but we will watch the durability in the future.
View detail