Reviews
Fits: HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Dio ZX (DIO), HONDA Dio SR (DIO), HONDA Dio SR (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Ape(100) (APE), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), SUZUKI Lets4G (LETS Forge)
Normal Mirror for mopeds.
ThirdMotorcycle's Today Mirror snapped off and I had to replace it. Very easy to read! Reasonably priced! … Too bad the Week Point is a little cheaply made…. "luxury" This is not for those who are looking for the best Mirror for their feet, but it is the best Mirror to wear on a foot scooter! View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZZ-R250, KAWASAKI KR-I., KAWASAKI KR-1R, KAWASAKI ESTRELLA
To STAR
Looks the same as OEM Product. Good cost performance. View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
slightly short
The OEM Product No. was checked and it fit, so I purchased it, but it was about 10 cm too short. View detail
Fits: YAMAHA XJR1200, YAMAHA XJR1200, YAMAHA TDM850, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500S, YAMAHA SRX250, YAMAHA SRX250F, YAMAHA SRX400
Black Rubber is a good choice because it makes your shoes dirty. I don't want to.
I rode about 8 km with normal TOWNShoes at the end of Restore, and only the place where the Change Pedal hits the pedal. Blackish stained 。 If we don't do something about it, it will get even dirtier, I was disappointed. View detail
Fits: HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA Live Dio・S (LIVE DIO), HONDA Live Dio J Special LIVE DIOSPECIAL Knife), HONDA Live Dio J Special (LIVE DIOSPECIAL Knife), HONDA Live Dio (LIVE DIO), HONDA Live Dio (LIVE DIO), HONDA Julio (JULIO), HONDA Julio (JULIO)
Driving about 1000 km
I installed it on my AF24TACT and drove about 1000km and so far no problems. View detail
Oil change
Along with the oil change, a new Drain Bolt Washer was installed. View detail
4mmWell nut
I bought this well nut to see if I could fix the screen using M4Screw.
Quantity:1 Set of 10pcs. is not that expensive, so it seems to be quite useful.
I would also like to find a nice fixed Bolt to match.
View detail
Fits: HONDA giorcub (GIORCUB), HONDA Little Cub, HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA Little Cub 55th Anniversary Special/Little Cub Special (LITTLE CUB 55th Anniversary/LITTLE CUBSPECIAL Knife), HONDA LITTLE CUB SP (LITTLE CUB), HONDA LITTLE CUB SP (LITTLE CUB)
Not the right fit
I checked the model #s before I ordered this air filter, but it is not the right fit for my bike...I can use it but it's not the right fit. View detail
Fits: YAMAHA Zr SUPER JOG (SUPER JOG), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA SR125, YAMAHA SR125, YAMAHA SEROW XT225 (SEROW), YAMAHA SEROW XT225 (SEROW), YAMAHA RZ50, YAMAHA RZ50, YAMAHA Mate/Mate DELUXE (MATE/MATEDELUXE)
Purchased for Yamaha Bobby50
I bought this for Restore for my Yamaha Bobby50.
It has not been driven yet, but it was installed without any problems.
View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA ROYAL STAR TOUR CLASSIC, YAMAHA SR500, YAMAHA SEROW250 (SEROW), YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
No problem
I bought this product because it is a little cheaper than OEM Product. No problem at all. View detail
Fits: SUZUKI Address V50, SUZUKI Address V50, SUZUKI Lets5G (LETSFive G), SUZUKI Lets5G (LETSFive G), SUZUKI Lets5G (LETSFive G), SUZUKI Lets5(LETSFive), SUZUKI Lets5(LETSFive), SUZUKI Lets4G (LETS Forge), SUZUKI Lets5(LETSFive), SUZUKI Lets4G (LETS Forge), SUZUKI Lets4G (LETS Forge), SUZUKI Lets4 (LETS4), SUZUKI Lets4 (LETS4), SUZUKI Lets4 (LETS4), SUZUKI Lets4 (LETS4), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 Pallet (LETS for Palette)
It seems a little thin.
Parts to replace for now when you get a used Scooter
It's NTBBrand, which is cheap and reliable, so it doesn't seem particularly problematic, but it also seems slightly thinner than OEM.
Well, it's on and running, so I don't think it's a particular problem.
View detail
Fits: SUZUKI Address V50, SUZUKI Address V50, SUZUKI Lets4 basket (LETS4Basket), SUZUKI Lets4 Pallet (LETS for Palette), SUZUKI Lets4 (LETS4), SUZUKI Lets4G (LETS Forge), SUZUKI Vecstar 125 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR)
LETS4Palette (CA45A) OEM of 11.7 g×3
OEMWeightRoller- replaced with the same etc. product because it was worn out.
0.It is about 2g lighter, but it is considered to be within the range that is not noticeable in city driving.
The quality is good and the price is reasonable.
5.5g× I'm sure 6 or so would be fine weight-wise, but what's the difference between 3 and 6?
View detail
Depending on how many you have, you may be able to buy them at the homestead?
5mm×16mm tapping screw
Screws to fasten the lid of the air cleaner
If you know the length, maybe Homesense is cheaper?
This is for people who do maintenance and should have a spare.
View detail
Fits: HONDA LITTLE CUB SP (Little Cub), HONDA SUPER CUB 100 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 (Super Cub), HONDA SUPER CUB 50 BUS (Super Cub), HONDA SUPER CUB 50 BUS (Super Cub), HONDA SUPER CUB 50 BUS (Super Cub), HONDA SUPER CUB 50 BUS (Super Cub), HONDA SUPER CUB 70 (Super Cub), HONDA SUPER CUB 90 (Super Cub)
The Chinese carburetor has a
I bought this carburetor for replacement of a Chinese carburetor PZ20 because I had a gasoline leak due to the downs of the gasket, but it was too thin for the Chinese carburetor. But I could not use it because it was too thin for Chinese carburetor!
I'm sure OEMcarburetor would be fine, but I haven't tried it, so I can't say for sure.
View detail
cheapness is the name of the game
I think it is possible to find OEM parts, but the Breather Hose 650mm 6mm Diameter from the rear of the crankcase of CUB series engines was out of stock, so I substituted it with this one of the same size.
I don't want to be speculative, but this Hose in a different Size was falling apart after a year, so it might be better to buy it if you want it for now with the intention of replacing it frequently.
View detail
The quality is appropriate for the price, but I expect durability.
[How is it used?
Since we wanted to change the number of Sprocket pins on the ESTRELLA and the Chain that was attached to it had deteriorated, we decided to take this opportunity to replace the front and rear Sprocket and Chain at the same time.
ESTRELLARear Sprocket was only available in the same size as OEM from all manufacturers, and the only way to change the GEAR ratio was to adjust the Front. Therefore, the Rear Sprocket is not that important, so we chose NTB because it is cheap and we can expect durability in terms of material.
Was the one you received as per Image?
The color is silver, the same as OEM. However, the machining accuracy is commensurate with the price, and there are scratches like dents on the surface, and the corners of the teeth have rough surfaces as if they were left uncut.
I'm not that concerned about it since my use is for commuting Main city driving, but it might bother some people.
Was the installation difficult?
If you can remove the Rear wheel and remove the Nut from the hub, you can do the replacement work yourself. ESTRELLA is especially good because it has a center stand, so you can do the work without a maintenance stand.
As a side note, if you are replacing the Chain or Sprocket at their wear limit, I would recommend replacing the Hub damper together. I was concerned that the hub damper was too thin and the hub was rattling when I replaced it, but I forgot to prepare the hub damper.
How was your experience with it?
It works fine as a Sprocket. The color matches the silver color of the surrounding plating parts and rim.
[Included Parts:were they on?
Only SprocketBody.
[Was there anything that disappointed you?
Although in line with the price, the machining accuracy is not that good.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR
Lever ratio is 37.5
It was
Purchased to make the clutch on my SV650 run better.
OEM is 34mm.
I bought all kinds of holderetc.
When I contacted NTB, they told me the lever ratio of the relevant car model, but they did not tell me about other car models....
I wonder if there is anywhere that summarizes this.
View detail
Fits: YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA JOG (JOG), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Giorno・SPECIAL Knife, HONDA Giorno, HONDA Giorno, HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER)
OEM Product and the same etc.?
Brake Shoe was replaced by Other Brand Product. "Squeak." It cries, so I bought it to try it out.
The squeal is gone, but it is not as effective as Other Brand Product.
I guess it works just as well as OEM.
View detail
Fits: YAMAHA Drag Star (DRUG STAR), YAMAHA TRICKER (XG250 TRICKER), YAMAHA Drag Star (DRUG STAR), YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA TRICKER (XG250 TRICKER), YAMAHA Drag Star (DRUG STAR), YAMAHA TRICKER (XG250 TRICKER), YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SEROW250 (SEROW), YAMAHA SR400, YAMAHA Drag Star (DRUG STAR), YAMAHA XT250X, YAMAHA Drag Star (DRUG STAR)
Works fine.
OEM looks SMART and effective, but modestly priced.
This one is not as good as it looks, but it serves as a Dust Seal, so I don't think it's a problem.
It seems to be rather durable as well.
There is only one, so you need to buy two.
View detail
Fits: HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS)
Replaced while replacing Tire of CUB.
Damper rubber was replaced as a precautionary measure while removing the wheel for tire replacement. View detail