Reviews
Fits: DUCATI Panigale 1199/1098(rear)/1198/STREETFIGHTER1198/Deer Bell MULTISTRADA 1000DS1200 MONSTER S21200/Setc., DUCATI Panigale 1199/1098(rear)/1198/Streetfighter 1198/Diavel Multistrada 1200 Monster 1200/S etc., DUCATI Panigale 1199/1098(rear)/1198/Streetfighter 1198/Diavel Multistrada 1200 Monster 1200/S etc.
Short and unsettling, but functional enough.
[How is it used?
For home maintenance and custom
Was the one you received as per Image?
As per Image
How was your experience with it?
Shaft is short and I'm afraid it will fall out.
[Points to note]
Nothing in particular, as long as it fits the diameter of your car model.
How did it compare to other products?
This price for one Shaft seems high, but I have no other choice.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
J-TRIP's Helpful Rubber
I have to admit that this is very convenient for me to use the VHook Maintenance Stand alone in a small space, just like the Receptor Set for Beginner! (?) I'm sure they could use it!
I wish I had bought this from the beginning because I scratched the Swing Arm by inserting it at a slight angle without using this…
View detail
To improve maintenance efficiency
I purchased this manufacturer's product to improve the efficiency of maintenance of the Large model. The best thing about it is that the word-of-mouth is good, the feeling of using it is good, the feeling of putting a motorcycle on it is quite nice, and above all, the adjustment of the chain and rear suspension is easy to clean, so I am glad I bought it. View detail
J-TripOEM Product
It hangs well, and the compatibility with J Trip's STAND is as OEM as you would expect. The extension collar reduces the risk of scratching the swing arm. It may not be good for those who wear it all the time because it looks longer, but we chose this one because we remove it every time we use it. The color will fall off if you are not careful when removing it, which is a slight minus point. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Rubber cover comes off quickly
Rubber cover comes off easily. It was gone before I knew it.
The comfort is perfect, and I think every ZrX rider should have one, including J-TRIP's STAND.
View detail
Fits: Others , DUCATI SPORT1000, DUCATI PAUL SMART1000LE, YAMAHA V-MAX 1680
Easy Lift up
Lift up can be done lightly.
It is easy to use the special receptacle, but until you get used to it, it is a bit nerve-wracking. In fact, I almost knocked it over several times.
There are videos on YouTube on how to use it, so I think you should watch them before you do it.
If you have a Jack or similar, you can safely apply the STAND after the vehicle is vertical.
I think it is good to have it for washing the car, cleaning the chain, and removing and installing wheels.
View detail
Maintenance-oriented construction
Shaft is easy to remove. View detail
Pricey, but good quality.
I purchased this for use on my R nine T.
I know there are other Manufacturers that are less expensive.
RearMaintenance Stand is also made by J-TRIP.
Front also chose J-TRIP.
It is light and easy to use, and when the Brake Caliper is removed, it is easy to raise and lower.
An S-shaped Hook for hanging was also included in the package.
Also, the underside of the part that inserts into the Stem hole is covered with Rubber.
Care was taken to prevent scratching.
The price was high, but it was a satisfying purchase.
View detail
JTripRear stand
Unlike ordinary paint, the solid plating gives a feeling of superior resistance to corrosion and rustetc. from paint peeling due to scratches. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Definitely!
It is indeed a ZrX exclusive product!
You can use it at a good height.
This will be for j-trip Wide Type only.
It cannot be given in a regular Short low ler.
Take care!
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
no problem
I used it on my Z900RS.
I had previously used an anodized swing arm hook on another motorcycle, but it originally interfered with the Jack, so it was scraped off and the substrate showed.
The swing arm hooks here are made of a plastic-like material, so the color did not peel off even after hanging jacks.
I was also satisfied that it was long enough to not interfere with the Swing Arm.
View detail
A classic?
I used it on a SEA BASS STAND, probably an OEM SEA BASS from J-TRIP that I purchased over 10 years ago.
I used to use a Swing Arm with a receiver on the Hook.
I bought a Ducati MONSTER400, so I bought this one too.
I could not find any Bolt on MONSTER400 that would attach a receiver to the Swing Arm.
Installation is simply a matter of replacing the Hook that was previously attached.
The Rubber seems thick and rigid enough to hang STAND with confidence.
I don't have a Spec. because I'm Firmly, but it would be nice if the price was a little lower.
Well, once you buy it, you can use it for more than 10 years.
View detail
J-trip after all
Smooth operation with less resistance when STAND is applied. View detail
Balance
I went with Magic because it is not available in Silver color, so I decided to go with Black. View detail
Used to float the Front with ease.
I purchased this product because I thought it would come in handy when cleaning the front wheel.
I like that it can be adjusted to fit the width of the Front fork.
However, when using it, the Rear stand must also be used in conjunction with it. Note that this cannot be used alone.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
Used for Z650RS
It is for Z900RS, but it was attached to Z650RS normally. View detail
That's jTrip, easy to get up there.
I bought this to raise the Front of my ZrX1200 DAEG.
As long as you know the hang, you can go up without difficulty.
However, since it is unstable when tilted in Side Stand, it must be used with the Rear raised in Rear stand.
Once you get used to using it, you can easily raise the front, which is very useful. It is expensive, but it is a good product.
View detail
Use at your own risk.
I bought a reverse attachment for the Rebel 1100 and used it, but the attachment on the Sprocket side did not fit properly and the tires did not rotate properly. I was told that if I put this Attachment for 250 or 500 on the Left Side and STAND-UP, it would solve the Stress problem;
I have not had a chance to try it yet, but I purchased it with a light feeling that if it does not work, I can just use the reverse Attachment.
The product is JTrip, so you can be sure of it.
I am satisfied with the Large change because the shipping was promptly done by WeBig.
View detail
I finally bought it.
I finally bought it.
I had been hesitant to buy it because of its high price, but now that I have saved up my points, I bought it.
The quality of the product is good and satisfactory because it is from Japan.
Assembly was easy and we are looking forward to maintenance.
View detail
Recommendation for those who live in a car or in a housing complex!
When it comes to Motorcycle MaintenanceSTAND, J-TRIP! Anyway, the quality is good and it won't break!
I'm sure you're all wondering. Long." Or "Short" Which one to buy!
I think it is. In conclusion, if storage Space and use Space allow Long." You have one choice!
Long size is much easier to STAND than short size.
So, is a short size like this product bad? Not really.
Bicycle parking space in housing complexes, where maintenance is required in a small space, or
I think Short is also the best choice for transporting in a transporteretc.
Anyway, the quality of J-TRIP is the best, so it's a RECOMMENDATION!
View detail