Reviews
It's cacophony
Lever of Toggle is smaller than I expected, so it hurts my fingers a little bit (twang, twang, twang) When you put the blinker back, you have to tilt it back to the other side because of the loose feeling of operation I'm happy with Large for the look and feel of the product
The packaging and the Instruction Manual are very thorough, and even the patterned paper Seal for drilling holes is included I can feel the manufacturer's conscience in the fact that it has
View detail
It's too hard
I gave up using it because it was too hard at the time of installation
When I tried to install it, it stopped in the middle, and when I tried to remove it, I couldn't get it off, so I ended up tearing it up I removed it Some resolve to put it on with a hardness that is impossible to reuse? I'm not sure if it's necessary I like the color, shape and price, but I would like to see a softer Material
View detail
Fits: KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
good
Used on the ZrX1100's rear blinker Before installing this product, the front blinker has a front blinker made by POSH [Color] Installed a SmokeBlinker
FrontPOSH and Rear is a mismatched spec. called Jills, but the quality of both are It was finished without any discomfort due to its solidity
The only thing that bothered me was that there was a lot of BALI left on the product, so I had to tighten the screw as it was Sometimes it didn't close tightly enough and had to be sanded down
The POSH product could be installed without such a thing
View detail
Fits: HONDA CB400 SF, HONDA CB-1, HONDA HORNET 250, HONDA JADE 250, HONDA VTR250
Shifting on installation
There seems to be a variation in the accuracy of the screw hole on this side, and there is a slight deviation of about 1 millimeter when it is installed It was generated If you're interested, you may need to do some additional processing [Color] The Smoke look is very dark and cool! View detail
A little hard
It is harder than other companies of the same type.
Some people like stiffness, so it may be good for those who like it.
I would rather have been a bit more soft.
View detail
Cheap and easy to use
I installed in the 2017 SR. It is necessary to shave a little, but it is not a work that did a big charge. Also, we need M3's 15 mm Screw. Well, Screw is available at Home center as soon as possible. There are oddly high similar items, but I am satisfied with this item. Boobs Blinker, the atmosphere is good! View detail
The side BALI is Spec. is.
I was disappointed..
About 5 mm of BALI remained on the side of Blinker lens.
1pc. Not only 4 were in this state.
Although there is no complaint if it is a part that can not be seen after installation,
It is remarkable because it remains on the surface.
When I contact Manufacturer, this is Product Spec. apparently.
If it is Clear Lens it may not be noticeable so far,
It's quite outstanding because of the Smoked lens.
I think that it is better not to buy it except absolutely those who can handle to Beauty.
View detail
The attached Bolt ,,,
The included Bolt was easily torn off during tightening.
Let's pay attention to Torque at tightening.
Other than that I think that it is an excellent product for Cost performance.
View detail
It is different from the notation Size
Quantity with different colors : I bought 2pc.
Although it is with Pull back 165 mm, it is only about 100 mm even if you measure it.
It is disappointing because of the difference between Large and I was planning.
I do not know which country's production as goods, but I use it in other Motorcycle "Renthal" "Risma" "ABM" There is nothing to compare with.
Speaking of Taper, it is invisible to Taper.
Material is also not specified.
Well, let's use it as a cheap piece.
If you want to have a chance, it's okay to put it 4 to 5 times.
"Because there is cheap there is a translation" - - - - I said well.
View detail
Not bad
Bar End Since it felt that the insertion portion was Rubber little by little, I took a drastic change.
I think that it is good for the price.
I was able to install firmly.
As a precaution, the Screw accuracy of the Nut part was bad and could not be installed by idling even if it was tightened.
Tap cut it and it was safe to install it.
View detail
Fashion oriented fashion oriented fashion model
Since there was a request to make Grom's feet good, I planned drastic Lowdown.
Grom 's Rear suspension is not a LINK expression, so Lowdown is difficult. Shock itself Short itself or use this Parts.
At first, I tried to shorten Shock itself, but Stroke would be reduced, and I decided to install this product from the Cost side.
There are no Instruction Manual for goods delivered from Wee Big. Although I never can not afford it, I think that it is better to have Instruction Manual as well.
Quickly install. Trouble occurred when attaching Base to Swingarm. Swingarm hole and base hole position are off by Comma several millimeters and Bolt does not pass.
Since there is no choice, I will scrape away the base Aluminum material. I think there is a problem with the product accuracy of Grom rather than the accuracy of the product. Grom's product precision is quite about.
Finally I aligned the holes, so when I try to install the Shock, I will not attach it.
Like OEMShock, if the Damper diameter is thin, my Grom is a vehicle height adjustment expression of Mukawa river and the body is thick. Since it can not be helped, I managed to remove both Damper Body and Mounting Base and managed to install it. Temporarily assembled and scraped repeatedly, so I took horrific time to process Aluminum material.
I finally installed it, but this time it interferes with Tire, so I was able to shave this shock attachment part as well and set it as OEM level finally.
Impression after installation. Certainly the vehicle height drops. Get down. Although the feetability was improved, lowering the Front side can be done by shifting the mounting position of the Fork, even at the maximum Large 1. Only about 5 cm does not go down.
That's why I fell backwards and my appearance is bad. In order to lower Front, we have to put our hands in Fork itself. Also, since the point of action comes behind, Shock became hard as expected and the ride comfort became considerably worse.
Because it is this state in the Shock of Takekawa that is setting softly, if it is originally a hard OEMShock, more comfort will be exacerbated.
If OEMShock is a combination of glomes with good work accuracy, it will be attached with Bolt - on, but otherwise it will be hard to install.
Also, it is accompanied by deterioration of ride comfort.
Considering the unbalance with the Front side, it is not that Lowdown is completed only by installing this Parts.
View detail
Fits: KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Excellent compatibility with SmokeTail
I also exchanged this as Tail was made Smoke
Although it was not in the explanation, Amber 's Valve was also attached
However, both are double valves ...
Font Blinker is Double Bulb and it can be used because it becomes Position with Key ON ...
Rear is a poor position and angle in the mouth Gold Poses are different, so you can not use it as it is
For the time being, if it feels like Pin 1 pc. Once you scrape or drop it with Nipper, you can use it once.
Double Bulb has 2 contacts of Valve, but the TailBlinker part has only one point of contact, so if it is in contact it will light up when Blinker ...
However, because there is no Pin in one side, it can be said that it swings immediately with the vibration, so if you use Valve, you can get Valve's Home Center and AutoBacks around for Rear to get Amber's Single Bulb I think it's better to keep it.
In my case I replaced both LED Bulb back and forth
Although it is a point of caution at the time of installation, it is a feeling to tighten with a Tapping screw like Tail and dig into a thread, so once it is tightened, once it is tightened, it is sure that you take off the tuna and tighten it again
Since Crack enters or it is broken as you keep tightening up to the end as it is ...
This also has four holes Gap and Woundetc. There was not too good condition.
I am worried about that point if it is overseas cheap, but for GPZ it's a lot so there are few Rose stuffs so I guess ... (Lol)
Although I do not know whether it will be a reference because it is exchanged for LED Bulb, it was also that this time when Position also in the daytime, the brightness at the time of lighting is necessary and enough, the vehicle inspection will be cool
It is good because the price is also cheap and the atmosphere changes at a stretch
Recommendation for exchange with Tail lens
View detail
It looks nice - - -
Cospa is good. But it seems to be suitable for Rubber inserted in Handlebar, but there is no Instruction Manual. It was a failure in this way of attachment thought that this shape would be this one. I started running out while running at high speed. I fixed it with ServiceArea. I replaced it with the Rubber of the Bar End I used before and I am using it now. View detail
The product is nice..
I changed it to outside Fender and I made a hole in the Fender outside the company
I was too shocked to open it, so I was looking for something like that from Stubby's Bolt and came to this.
In the usual Cable guide, there was nothing like Bolt hole just sideways so that it could be used in the vertical direction
I bought this a little although I did a little price.
The thing itself is convenient, but was the color selected by me related?
It takes 2 months for delivery and it is just a little disappointing ...
I do not think there will be any problem if ordering it in high spirits
For those in a hurry it may be better to check the delivery date firmly.
View detail
I was worried.
We made 4 Inch with 4 Inch and 5 inches
Small I thought it was a good idea but it was perfect Large
I was glad that the LED Unit fits into this but it did not enter truly
View detail
Mirror installation of KSR 110PRO
The acquaintance attached Mirror under Handlebar is often Parenthesis, purchase, part cut part is obviously wanted to imitate, but impression that there is no part that cuts hands such as BALI and it is not bad despite price was.
After actually installing it, I closed the Screw in the place where the Handlebar was bent, and it cracked quite easily. My mistake I did not put on the straight side of Pipe.
I finally got it like the picture below. The degree of freedom of installation is high, I think that not only Mirror but also various ways of using it are cheap.
View detail
Refreshing around the Front
I bought it for Refreshing because the Front around was cluttering. Making is solid and appearance also improved Parenthesis and I am extremely satisfied. View detail
I made Bar handle, so I tried it
I bought it for the bar handle of ZX - 14R.
We, the product of this hand is the first time, performance More than anything else,
"I am also using MOTOGP. "
I am interested in things called '
I bought it in a Dress-up mood.
The thing itself is Green Light which is somewhat brighter than Green Light of ZX-14R, as shown in the picture.
Installation is - - -
Instruction Manual was not attached. (TΔT)
I thought that Bolt was in Anchor and it would be better to close it,
I do not understand the meaning of the Spenser in the Grip end part,
Quantity : 1 Set of 2pc. Is it? Quantity : 1pc. Is it?
Do you fit in with shape problems?
Is it just a lid?
I do not understand well, first of all,
"I got it like this. "is (Lol)
Although the angle of the Guard bar seems to change,
After tightening, it turned inwards and was fixed,
Which stage do you open and fix?
I want to see it..
In terms of things, I think that it is not so bad,
Oh yeah, it is not a thing you are attaching,
No one can hear it (Lol)
I want you to enclose even things that describe simple installation methods.
Mounting method, beforehand, similar products etc.. It's better to check the ones with hompe or blog
View detail
Cheap to use
【What made you decide the purchase?】 Low price
【How was it actually used?】 good. Useable. Simple.
[Is there anything I was disappointed about?] At the time of temporary fastening, the attached Bolt could not tighten the hand. It was a work at a time but I felt uncomfortable.
【Hope for Manufacturer - Please tell me if there are any improvement points?】 Improvement of Bolt, Tap.
【Have you compared items?】 None
[Others] It attached to KDX 125 SR purchased in second hand.
Mirror used what I had in home Garage.
View detail
There was absolutely no strength
Even though I did not narrow it down with Torque like that, the Screw club got stretched.
Spring washer's Spring I got this condition in the margin. I think only as poor strength.
View detail