Reviews
Fits: HONDA CBR900RRFire blade
Purchased at the same time as the brake lever
It's the only Black choice, so it's not as flashy, but the texture and feel is better than the OEM
However, the Clutch is gripped, so without Gloves, the LeverReverse side When the corner of the Small finger or ring finger hits the Small finger, it hurts a bit
View detail
Although it is limited to the Circuit buried in magnetic bars, I bought it because of its ease of use and cost
What made you decide to buy?
I rejected the GPS-based QSTARZ and Dig spice because they are too expensive at $60,000-$40,000
The frequently driven Circuit is compatible with magnetic sensors, and it was affordable Choice
How was your experience with it?
The results of using it at three locations in the manual's "Magnetic Bar Buried Circuit List"of the instructions
Okegawa Sports Land…15cm of ground clearance is OK
However, the magnetic bar does not pass through 50 to 60cm from the end of the courseLeft, so it will not react Mm (A magnetic bar is buried a few meters from the ControlLine.)
Quick hanyu & hellip;12cm of ground clearance is not enough
They were buried a long time ago and they hardly responded
If you set up the SS at 9 cm above ground level, 80% of the time it responds, but there are many malfunctions
Tsukuba 1000…ground clearance of 18cm is OK
Only one lap of the 45 minutes was unresponsive
Was it difficult to install? (In the case of hard parts)
Be careful with the handling and fixing of Wiring to avoid the high temperature of the Exhaust pipe etc I did
Now you need some DIY skills on the Sensor side Bracket
What is the point or hang of installation (for hard parts)?
It's difficult to connect the power supply to ACC, so it's connected directly to the Battery
(After all, it's non-Waterproof, and it's removed except when running Circuit, so Large It's tough:)
The magnetic sensor is installed on the center line of the straight line with a ground clearance of about 10 cm or less in the Rider's riding condition Then it's best
How does it feel when you wear it and what is your height, weight, etc. (in the case of Apparel)? Any
[Was there anything that disappointed you?
The connector is thin and not very durable
Do you have any wishes or improvements you would like to make for the Manufacturer?
Waterproof Specification of the body
Strengthened connector part
[Do you have any products to compare it to?
The company's TimeA Tucker
[Others]
The magnetic sensor bracket is not included, so this is a DIY project
It's even better if you can use the butterfly screw to adjust the ground clearance
The magnetic sensor is covered with a plastic bag to prevent wounds and stains Waterproof
View detail
I always love it
When you're racing, the Knee Slider is a consumable item, so this price is a big help
The feel of the installation is hard and slippery
The speed of reduction is the same as that of other Manufacturer's
The only thing that bothers me is that it makes a lot of noise when it's installed
It's good for people who want to Appeal at the pass
View detail
ideal
I used to use a SOLAM55w6000k, but I had a more pure white one I bought it because I wanted it
I am satisfied with the bright white color as expected
I was worried about how it would be at night because I prioritized 8000k for fashion, but it was a bit more I think it's brighter now (Lol)
I don't know about the rainy weather, but I'm more comfortable on the highway at night than before
I've been using it for a few months and there is no Trouble
The old one didn't light up or anything, so I'm glad I changed it
Best of all, it's this performance for about 1/10th of the Gold amount, so it's a great cosmetic!
View detail
good
Purchase required for traveling Circuit. I am satisfied with the function I was looking for! I would like to improve about the point that there is no Waterproof function to Body although it has the Waterproof function of Sensor part! View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
Are they conforming properly?
Carbon Style's Tank cap has deteriorated and comes off, so Material : I bought Cap of Aluminum.
Appearance Design ? Reasons why prices were cheaper than other companies.
It's hot when it's hot and it does not touch with bare hands.
Bundled Packing is thick, and the attached Bolt can not be installed short.
Even if I use alternative Bolt 4 M dish Bolt does not sell long legs.
Cut the Rubber board of half thickness unavoidably
My own packing.
Although I could barely install it,
Parenthesis is bad at a state where it falls dented slightly below the tank surface.
Packing too thick for our bad dish Bolt.
I can hardly imagine that we are conforming to the vehicle properly.
We do not want to sell only with the general adaptation that Universal will work if it is a conventional Exclusive HONDA Motorcycle Tank cap.
Manufacturer's correspondence is not good either.
No reply from Wei Big !!!
View detail
Satisfied
In conclusion I just want to rub the knees.
I switched from NAKED to SS, the opportunity to get on and passion fell down, but I want to rub the knees.
Since Knee is a resistance to fluffy, I feel that Limit is safe in this case. Two times the thickness of likely leather bread de FaultSensor is likely
I expected to have.
View detail
Care must be taken at the site where the magnetic sensor is installed
There is almost no error from GPSData logger and visibility is high, and Barge and performance are satisfied with respect to Body and performance.
Body installation Included Parts : Without using Bracket, we processed the T-shaped trunk number of about 100 yen at home center, shared it with Meter fixed Bolt and fixed it with face Tape so it is super easy.
However, it seems that installation of the sensor to the SSMotorcycle requires one device. At Home center I found a Bracket that conforms to the shape of Under Cowl and I thought that the code also brought me to Meter along the Side stands sensor code, but when I tried running, the Sensor was pretty much in Left turning I was scraped.. Still it works, but Right Side is close to the lunch box catalyzer, and if you can scrape the Sensor any further, it might be bad if you need to cut Cowl somewhat?
View detail
Cospa best
Quantity in one:Pair (for Left and Right) It can be used in both directions and is very useful in Tsukuba where there are many RightCorners I think this is the thicker one on the market It's easy to push your knees View detail
Cospa is the last!
I wore it in a leather bread for Touring.
Velcro of SensorBase cuts out the portion where the Large has been destroyed.
I would like to try durability by wearing it also in the Racing suit and running Circuit!
View detail
Performance more than price, outstanding durability
Durability and ease of use are outstanding, one disappointment is that the crucifixion of Knee slider and Base is so complicated that some floating or somehow it does not depend on appearance, but it will never peel off, Knee slider will be scraped and it will be used limit I tried hard until I arrived. View detail
It is Exactly for introducing Circuit.
? Circuit It was vaguely running at the running meeting, but wearing Time a Tucker knows the concrete time gradually but it is connected to TimeUp.
? There is no problem if the person who can make the plastic can install it. However, in the enclosed Velcro it is insufficient in quantity to purchase separately in 100. Bracket attached to Sensor is also purchased at 100 Yen, processed into L-Type, fixed to Under Cowl with Velcro and Gum Tape. Meter also fixed in Screen with Velcro and Bracket. There is no problem for now.
? During Touring Sensoretc. In Space in Cowling.
? The difficulty is that when Meter gets hot, the liquid crystal turns black and characters can not be read.
? I am glad that it is a little lower price.
View detail
It is Exactly for introducing Circuit.
- Purchasing is lost with Lap timer, but it is possible to save Data with Excel and at Indicator of Orange & Green Light, purchasing this product by just making TimeAttack.
- Hang the Body on the Screen for installation. Indicator at the base of Separate handle. Sensor machines the Stainless Steel plate of 100 yen Shop and hangs it on Under Cowl. I used all the powerful Magic tape on the market. (The attached Magic tape seems weak pasting power) In addition, if you are able to do maintenance of Motorcycle, I think that you can install it without problems.
- The visibility of Body screen and Indicator is good, so you can concentrate on running.
- It is not at Completely Waterproof so you can not use it in the rain.
- Installation and handling I think that the Instruction Manual is a little easier to understand.
View detail
Cost performance is good
I purchased this product because it seems that the magnetic bar is buried in the Course that I always run and the Red external Timer seems to forget the Red outside line unit.
Easy to buy in terms of price, the function is also simple and easy to use, easy to see the Large size of the display part, it is good with the Large size which is not troubled by the installation place.
However, as far as magnetic Sensor is concerned, it will not pick up magnetism unless it is in a rather low position.
View detail
I think that it is very cheap and very good.
I had Repeat SK-17 so far, but this is same. Since there is a thickness of
We will Repeat inexpensive korean.
Adhesion to the bridge's Slider base is slightly weaker than that of SK-17
It never peeled off.
View detail
Accurate enough and inexpensive enough
Installation and accuracy
The Instruction Manual says that the Sensor is less than 20cm above the ground, but I have to use my In the case of the Suzuka TWINCircuit, which is often driven by a car, it needs to be lowered to about 11cm from the ground level to respond No. The mounting position should be lowered to the extent that it is not in contact with the ground, and the magnetism between the Sensor and the ground Lower the mounting position to a point where it is not in contact with the ground, and place the Cowletc. magnetism between the Sensor and the ground Ideally, it should be unobstructed Also, since Wiring extends from underneath the bodywork to around the meter, the exhaust pipe and Avoid hot parts of the engine and handle it in such a way that it is hard to break the wires when it falls over (Through the Cowl backing, etc.)
By the way, the accuracy of the measurement was about 0.01 seconds behind the official Circuit instrument
Quality, function and visibility
When exposed to the blazing sun for several minutes, the screen display turns completely black though it is a part that cannot be helped because of the LCD screen It becomes useless until it cools down If it starts running, it cools down with the running wind, but I try to avoid direct sunlight while waiting for running Moreover, when there is no room to look at the screen properly because Straight is short, etc., I use Back Visibility is a little difficult without light
The controls are good and the Switch is easy to press, even through Gloves
Cost performance and durability
The sensor part is currently being used for more than 2 Seasons and is exposed to mud splashes, vibration and wandering heat There is no problem However, Switch of Body has failed once To be honest, I think that the life expectancy changes greatly in how it is used, but I do not know when it falls over and breaks This is the cheapest magnetic type Lap timer of the MAJOR magnetic type I think it's a bargain
View detail
Rubble on the road
It is sensuously hard feeling, I do not know because it is not used on the road surface such as Circuit, but on a public road it is such feeling w
Depending on the use, the decrease is early, I think that it will not decrease so much if it is applied to Corner, but it will end in one day with usage like rubbing.
Scraping dust adheres to SIDE and it is a bit gray..
View detail
I'm very impressed
Ordering this I was apprehensive about the quality of this product, because it was so cheap, I had my doubts...But Boy was I wrong, The machining is very neat leaving a very smooth finish, The mechanism is very tight and smooth, coupled with a quality, vibrant anodization, I could not be happier. Very VERY nice product and I will be purchasing more in the near future. View detail
It is attached impression
The suit is Kushitani, which used to be the bank sensor of Kushitani in the past. I bought a thick bank sensor so I wanted to explore the bank angle earlier because the limit of the tire was low. For comparison, Kushitani is less than about 2 cm. Ziix is ??about 3. 5cm is. The thickness is obvious. Kushitani is firmly sewn on the Velcro, but ziix is ??thin because it is not sewn and it is a guya Nguya. Kushitani is more secure on the sensor itself, but I think that ziix also has no problem. Although it is a hook and loop fastener, although it is difficult to remove Kushitani, ziix can be taken normally. I am a little anxious.. Since course use is coming soon, I do not know the comfort etc. View detail
Stable use feeling
It is Protector which puts in the Racing suit. It is necessary for running meeting and Race. I am wearing a suit of Just size, but there is no problem with mobility. Although it looks reasonable, it is unlikely to feel the thickness when you wear it. There is also a sense of security. The suit of the suit may possibly be hard.. It is very similar to KUSHITANI's Spine Protector. View detail