Reviews
Old car style custom and can be used for CB1100!
[How is it used?
The NORMAL Handlebar Clamp was unadorned, and I wanted a Gold and Retro-chic Clamp.
Was the one you received as per Image?
I think it is more massive and has a higher quality than the Image.
Above all, BEETLogo motivates me.
Was the installation difficult?
It is Bolt On, so there is no problem.
However, if Attachment is used in Mountetc., it cannot be installed.
How was your experience with it?
I have not put it on properly because I am currently using Navigation, but it is solidly built and from the shape, I would expect it to be as stable as Stabilizer.
[Included Parts:were they on?
Instruction Manual, screws and stickers required for installation are included.
[Was there anything that disappointed you?
Not particularly
I was worried about the color of ▼, but I chose Gold because Gold parts are used in some parts, and the Handlebar area looks gorgeous.
View detail
Effective for dress-up
As others have mentioned, it works for Dress-up. I think it may have some practical use, but I think it is best not to test the effect by falling down. View detail
It was easy to install.
There is a hole in the handlebar. Installed on 2014 Z1000. -------------------------------------------------- -------- The handlebar has a hole. Equipped with the 2014 Z1000. Powered by Google Translator View detail
defective
The mounting hole for the switch box on the right side of the handlebar is too large and the switch box is not secured. I was worried about replacing the handlebar by myself, so I asked the shop to do it, but they told me that the switch box could not be fixed due to the above reasons. Also, as for the Handle end cap, the OEM Product was not available and we had to order a new HandlebarCap. There was no mention of this at the time of order, nor in the Instruction Manualetc. I am appalled that this is an exclusive product. View detail
Color is not good
Color of the product:I had been using Gray, but ordered Silver as a color change.
I was expecting a shiny Silver, but the texture is not so good as it looks like a dull Clear on the surface.
Color:Gray has a better texture, but this one is also halfway in color, so I used Silver.
I forgot the weight of the OEM, but this one weighs about 580g, which is about half of what I feel.
The inside diameter is 14mm and Universal Handlebar could be used without any problem.
Position is between Cafe and Muji.
Shoulder stiffness due to the wide width has been improved, but it is not suitable for long distance because it is low.
Without the extended spacer, the car will not pass inspection, but if you pay about 5,000 yen at a plaza during the inspection, they will change the structure, which is better than buying a spacer.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX)
Pipe Handlebar Kit
It's a simple process of removing the Normal Bundle and placing it on top of the Normal top bridge. If you are able to inspect and maintain it on a daily basis, you should be able to do it in no time. The only problem is that since the top bridge is covered, it's a little hard to insert the key and turn it around. View detail
Work is LargeChange
The handlebar itself is narrower and easier to position. The problem was the installation...as is typical of all Kawasaki motorcycles, the bar end was stuck and it took more than 2 hours to disassemble the bar end. As a result, it took me a whole day and about 5,000 yen for the parts. Unless you have confidence in Kawasaki Motorcycle's maintenance, or you have secured all the maintenance parts, it is not a work that an amateur can do. Please be sure to prepare for the work before you do it. View detail
Fits: KAWASAKI ZX-6R ABS, KAWASAKI ZX-6R ABS
I was prepared for it when I saw the Impression "For the price. I was prepared for this when I saw the IMPRESSION that
In this Impression. I've changed!" I think there were few reports of this.
However, it is still I want an exhaust system, and I like Parenthesis. If I put it on someday, I'll look at Timing and put it on." I was able to put it on.
But it is hard to feel the effect and it cost 130,000 yen. I decided not to have any regrets, so let me write this for my own idea of the value of the Gold amount.
Sound. 10,000 yen.
The change in sound is still the same. "Slightly." Sound quality is now elegant. I have a feeling." The sound connection at the time of GEAR Chain sounds smooth and Parenthesis is good.
Power up and weight down. 10,000 yen
Axel on feels lighter. Speed rides better at high rpm. I have a feeling." We did not notice much change in the lightness of handling.
Gold amount you thought you paid to see. 11,000 yen
Here was my assessment.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX)
Vibration control.
It was equipped when purchased used.
The dealer received the normal parts from the previous owner and replaced them with standard separate handles.
The replacement work is only fitted on the Top Bridge, so two Bolt×Quantity:Pair (for Left and Right)
It can be pulled out simply by loosening the
I rode with Separate handle for a while, but soon I felt quite uncomfortable with the vibration of Handlebar.
I have considered changing the weight and Handlebar Up Spacer, but I have not seen any other impressions from other users.
to see that it is not an anti-vibration measure.
So I switched back to Pipe Handlebar and there was no vibration at all.
However, I am a little dissatisfied with the riding posture, perhaps because I have become accustomed to the Separate handle position.
I think it is 30-40mm Up and 10mm in front. Separate handle of Ninja 1000 is also Upright,
For me, with long arms, it's almost a vertical position, on the other hand, long distance is a pain in the buttocks.
If you change it back to Separate handle, you get Handlebar oscillation, but with Bar handle, you get butt...
I have now settled on this product.
View detail
[Color] SmokeTailing
Tail. [Color] To make Smoke, the BEET [Color] I purchased the SmokeTail cover, and although it looks effective, I do not feel that it is a cost effective product. The price seems to be about 3,000 yen at most, and although motorcycle is a hobby of Genre, I wish they would set a gold price that can be afforded by the general public. View detail
I think the design is good
Design and texture are good.
However, when the product is attached to a vehicle, a chattering sound is generated.
The upper part is fine, but the lower 10mm Bolt mounting part has almost no play and can only be mounted at that location, causing play and a chattering sound.
View detail
BEETBlack tail
[Color] I purchased a BEET Tail lamp cover for my SmokeTail. I hope it is still cheap because RS is a popular car model. View detail
If you have a Small pattern, please try it!
I really liked the ability to narrow the aperture angle of the Handlebar.
I don't think it has much effect on me since I am 6mm up, but the slight narrowing has made it much easier for me, a small person with a small body, to ride.
View detail
Would it be possible to install it on the GSX-S1000GT?
The handlebar was designed for GSX-S1000, but I moved the hole in the handlebar to the Left Side and it fits perfectly. I also changed the bar end weight, so there may have been a synergistic effect. View detail
Wow that's cool
I decided on BEETJapan because they had the best design. View detail
First BEET
Compared to the NORMAL, the overall sound has an added bass. It also has a crisp two-cylinder sound that makes opening the Axel a pleasure.
Frankly speaking, the price is a bit steep, but the beautiful finish of the product and the desire to own it, along with the included Tandem Footpeg Bracket, make it worth it.
View detail
Fits: KAWASAKI VERSYS 1000 SE
Not cost-effective
Installed at the time of delivery.
I had some Supports with coupon at the time of purchase.
And it's easy to install, but it's too much.
First, the price.
This price for Slip-on is, frankly, too high.
With this amount of gold, it is said that you can buy a Full Exhaust System for other motorcycles.
Volume.
Not much different from OEM.
Rather, it is smaller than the OEM Exhaust SystemSound of the Z900RS and Z1000.
Weight will be lighter.
Good looking.
Japanese Vehicle Inspection Correspondence。
Frankly, those who are looking for sound should not purchase this product.
What's with this dull sound, I think.
After that, you would think that Front pipe....
View detail
Return spring
It makes stepping on the brake more comfortable. It is easy to install if you are a person who usually does maintenance. I am glad I bought it. View detail
Stiff shoulders and arm pain are gone.
[How is it used?
Mounted on GSX-S1000 (2BL-GT79B)
Was the installation difficult?
There's nothing wrong with pontooning.
How was your experience with it?
It was an OEMHandlebar for about 2 years and I regret that I should have replaced it sooner.
[Included Parts:were they on?
No problems
[Was there anything that disappointed you?
If I had to say, I would have liked another 10mm stop.
Other items that would be helpful
[Notes]
Install the black-colored handlebar slowly and carefully; the wound is quite noticeable when the gold-colored handlebars hit each other.
View detail
สินค้าสวยงาม จัดส่งรวดเร็ว View detail