Reviews
Two cars were replaced
There were 2 RSV equipped vehicles in stock at the same time.
Because both exhaust sounds are broken.
There were only about 30% left in both, after replacement it sounds good.
It is better to buy this product if you think of hardship than winding with DIY it is an ellipse.
View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22), HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22)
Exhaust pipe RSV
Color of the connection with Silencer was a bit insufficient, but processing Aluminum board, making connection, Complete connection, Align balance with Air cleaner, Silencer also adjusted slightly, No exhaust leakage Large change satisfied , I think the medium and low speed Torque became thick. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X
Silencer suitable for use
Trying to replace WR250R Silencer
I was considering it for a long time
Many people were wearing FMF
I was also considering with FMF
There is a vehicle wearing in some places
If you let me hear exhaust sound
Rejected because bass was too strong.
And I am concerned about welding details (Flowstone United States w)
Finally got a candidate
Leo Vinci and RSV.
But Leo Vinci is surprisingly heavy
And Silencer fixing is Carbon band.
I am mainly using forest roads
If the tide falls and the Band breaks.....
So we decided to last RSV!
By the way, because Barrel 4 was small in capacity, it was not listed as a candidate.
First of all, making is very good.
Fossil FOR JAPAN MODEL production. Welding well integrated.
Easy to install without any hardships.
There is nothing like common Bolt hole misalignment.
And the weight is about half! Very light.
After attaching and checking each part
Small exhaust leakage from Silencer port.
Rose once, apply liquid Gasket.
This alone eliminates leakage.
If exhaust sound is included SilentInner
Very crispy "Papa papa papa pa!"
The exhaust sound. When the bass is on board
Because my ears are so strange, it sounds just like the ideal.
It became a sound like a single cylinder.
Although high revs think that elongation is bad at this Baffle
Because I am emphasizing low and medium speed
This use is enough.
Incidentally
As SilentInner exhaust leakage occurred
Once removed and also apply liquid Gasket there.
As soon as you remove it, set the hole of Punching mesh attached to Baffle to φ1. 8 to 2. Expanding to 4 Large.
Bolt fixing the end peace also
Because the stainless bolt that comes with it causes grinding
To prevent galling
Apply Grease to Posipo Aluminum Bolt
attachment.
The sound improved a little and it got so much better.
Animals at the forest road and
To hunters with pest control
It seems to be noticed as soon as possible.
Anyway making is very beautiful.
I decided to purchase another
It's easy to purchase Repair Parts.
Because I heard that other Manufacturer is various troublesome feeling.
If you think you can use it for a long time
I think I did a very good shopping.
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250 [Jebel] XC, SUZUKI DJEBEL250 [Jebel] XC
Attached to DJEBEL 250 XC
Anyway it's noisy.
Because the temperature is higher than the bass, it sounds like BALIBALIBALI.
High revolution area near Red is a good feeling with Race ish, but it sounds more like On road.
It was ☆ 4 because it was hard to strike the Seal which was memoed with dr-r and attached Bolt did not follow.
View detail
Since it was a single cylinder and he wanted to carry out the sound-volume Up of the tone quality to a slight degree changeable by a little change, it exchanged to the Silencer of the big caliber. If it turns, it is pleasant to a comfortable sound.
Since it was a single cylinder and he wanted to carry out the sound-volume Up of the tone quality to a slight degree changeable by a little change, it exchanged to the Silencer of the big caliber.
If it turns, it is pleasant to a comfortable sound.
View detail
They are goods indispensable to Chamber attachment of their own car. there is no production stop -- please come out. If there is nothing since it is consumable goods, it will be troubled dramatically. collect and stock -- it is -
They are goods indispensable to Chamber attachment of their own car.
there is no
production stop -- please come out.
If there is nothing since it is
consumable goods, it will be troubled dramatically.
collect and stock -- it is -- ~.
View detail
It succeeded in the ability of structure to muffle this product effectively well dramatically. Four strikes of RSV Since he had no Baffle of a Series III Silencer and it was quite noisy, it was good to equip with this this time. sound volume a
It succeeded in the ability of structure to muffle this product effectively well dramatically.
Four strikes of
RSV Since he had no Baffle of a Series III Silencer and it was quite noisy, it was good to equip with this this time.
sound volume and tone quality became the sound of good touch very much.
You also recommend it to those who are using the above-mentioned Muffler!
After adopting this, it also became a Torque up of medium speed!!
I think that what is necessary is for me to be easy and to just merely become since it is expensive.
View detail
Fits: YAMAHA WR250 R European specification, YAMAHA WR250 X European specifications, YAMAHA WR250 R European specification, YAMAHA WR250 X European specifications
This product has performed structure in which it is a certain Manufacturer from ancient times, and the price became brave comparatively. By the engine performance dramatically stable although used on town riding, a path through a wood, etc., un
This product has performed structure in which it is a certain Manufacturer from ancient times, and the price became brave comparatively.
By the engine performance dramatically stable although used on
town riding, a path through a wood, etc.,
until [ from a low speed / high-speed ]
-- on the whole, it upgrades and I use, being pleasing! Since the
Design also had a favorite form individually quite smartly, the
Muffler of this Manufacturer was adopted!
View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR250 (S-XR) Motard 03- (MD30), HONDA XR250 (S-XR) BAJA -99, HONDA XR250 (S-XR) Motard 03- (MD30), HONDA XR250 (S-XR) BAJA -99
XR of a commercial car -- the RSV Silencer was attached to Racer ME08 250 (MD30) business. appearance -- an Oval form + cone -- and -- coming out -- Cool! weight -- ME08 -- although it will not change so much if it compares that it is pure -- MD3
XR of a commercial car -- the RSV Silencer was attached to Racer ME08 250 (MD30) business.
appearance -- an Oval form + cone -- and -- coming out -- Cool!
weight -- ME08 -- although it will not change so much if it compares that it is pure -- MD30 -- if it compares that it is pure --
-- I think that it is considerably different.
It has attached only by extending the fixing stay hole to the Frame of the
Joint pipe a little.
The
Sound is quite quiet after the attached Silent inner silencer has stuck.
In case of the Competition Inner silencer of the
Option, it is not too noisy, and does not elapse calmly, but is very much good touch.
(quite still quiet compared with a Racer authentic positive one)
The important engine performance is certainly downed by a case with a Silent inner silencer.
Seemingly the use to a Racer is likely to be unreasonableness in Pons attachment too.
The diameter of Deguchi adjusts, it is made the sound volume of a Racer pure Level, and back pressure, and the former engine performance is maintained now [
].
(adjustment is continued still more)
View detail
Fits: SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel]., SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel].
Although the object for CFR250L had not been put on the market yet for improvement in acceleration performance, and a weight saving, the hand was added and attached for a while. Since the pure Muffler had dropped exhaust efficiency too much, they were ex
Although the object for CFR250L had not been put on the market yet for improvement in acceleration performance, and a weight saving, the hand was added and attached for a while. Since the pure Muffler had dropped exhaust efficiency too much, they were exchanged. good to change for the moment -- I consider. About sound volume, exhaust efficiency thinks that it is a good Muffler in spite of quite moderate sound volume. View detail
It was used for my Motorcycle 91-year CRM[ make ]250R. The Silencer of a Chamber is a product made from RSV in the product made from infinity. The direction where the Tube has deteriorated is OK at 28 phi.
It was used for my Motorcycle 91-year CRM[ make ]250R. The Silencer of a Chamber is a product made from RSV in the product made from infinity. The direction where the Tube has deteriorated is OK at 28 phi. View detail
Fits: SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel]., SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel].
[a Webike Monitor] -- Muffler exchange of wish -- it carried out. attachment has been carried out especially satisfactorily. Since Mufflers were exchanged for the first time, the right and wrong of the engine performance are not known, but I fee
[a Webike Monitor] -- Muffler exchange of
wish -- it carried out.
attachment has been carried out especially satisfactorily.
Since Mufflers were exchanged for the first time, the right and wrong of the engine performance are not known, but I feel that the omission became good and became light.
sound would be slightly noisy -- ~.
View detail
Fits: KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI KLX250
"Since the form of a genuine silencer is not pleasing, I purchased. It attaches in the second half of KLX. Since I unite R fender with the line of a seat and pushing with raising, the silencer meets the angle along the fender exactly and it's good. Howeve
"Since the form of a genuine silencer is not pleasing, I purchased. It attaches in the second half of KLX. Since I unite R fender with the line of a seat and pushing with raising, the silencer meets the angle along the fender exactly and it's good. However, it is the impression that silencer body which supports stay does not feel refreshed and it looks cheap. Although I think that sound volume is the quieter one for as the external, I think it is noisy for the public. I would become strangely sad when I'm warming up in the parking area of an apartment... Idling looks like the sound of a helicopter of the Self-Defense Forces. However, it sounds good when it turns. " View detail
Fits: SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel]., SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel].
It changed from an exhaust sound like a mail motorcycle of the djebel 200 to a crisp exhaust sound. Sound is carried out that it is easy to be splendid. Although sound volume is measured pure and becomes large, it is not explosive sound roaring.
It changed from an exhaust sound like a mail motorcycle of the djebel 200 to a crisp exhaust sound.
Sound is carried out that it is easy to be splendid.
Although sound volume is measured pure and becomes large, it is not explosive sound roaring.
Although it does not know that an inner silencer (baffle) is removed ... When an liquid gasket was not used, there was exhaust leakage a little.
View detail
Fits: KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI KLX250
It was not too noisy, and did not elapse calmly, but was just right sound volume. Since exhaust leakage was started when the place of the silencer was only a clamp band, I also regard an liquid gasket as a joint pipe as it is better to be purchased si
It was not too noisy, and did not elapse calmly, but was just right sound volume.
Since exhaust leakage was started when the place of the silencer was only a clamp band, I also regard an liquid gasket as a joint pipe as it is better to be purchased simultaneously.
View detail
Fits: KAWASAKI SUPERSHERPA [Super Sherpa].
Torque is thin touch in case of normal cab setting. He lowered MJ+5 and one step of jet needle clip from normal. Sound is quiet, and when idling's is turned, it is a crisp sound. It is *5 if the liquid gasket is attached.
Torque is thin touch in case of normal cab setting.
He lowered MJ+5 and one step of jet needle clip from normal.
Sound is quiet, and when idling's is turned, it is a crisp sound.
It is *5 if the liquid gasket is attached.
View detail
Fits: KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI KLX250 ES, KAWASAKI KLX250 SR, KAWASAKI KLX250, KAWASAKI KLX250 SR, KAWASAKI KLX250
The first stage type of KLX250SR was equipped. Compared with the exhaust pipe of normal, an inside diameter is clearly large and exhaust efficiency improves. I think whether unite with setting reexamination of a carburetor or to be easy to become.
The first stage type of KLX250SR was equipped.
Compared with the exhaust pipe of normal, an inside diameter is clearly large and exhaust efficiency improves.
I think whether unite with setting reexamination of a carburetor or to be easy to become.
Although the remains of welding in the case of fabrication are also beautiful and appearance is carried out, if it uses for a while, a stainless glow will be carried out and it will become somewhat dirty.
View detail
Fits: SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel]., SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel].
After equipping with the muffler, it ran about 800 km, and the elongation of speed was felt [ whether the omission of exhaust steam became good, and ] to the run of the highway. In the general road, compared with the standard muffler, an exhaust sound
After equipping with the muffler, it ran about 800 km, and the elongation of speed was felt [ whether the omission of exhaust steam became good, and ] to the run of the highway.
In the general road, compared with the standard muffler, an exhaust sound has contrast and it has said it to mind also in sound volume.
I think that sound volume goes into the larger one.
Since the rust of a standard muffler and the portion of an exhaust pipe was severe, appearance also became good and it has satisfied it.
View detail
It changed from the silent inner silencer. It seems that it is bad just for a moment although sound changed to a good sound of low-pitched sound. [ of an omission ] When processing the punching metal which has closed the pipe, sound and an omissio
It changed from the silent inner silencer.
It seems that it is bad just for a moment although sound changed to a good sound of low-pitched sound. [ of an omission ]
When processing the punching metal which has closed the pipe, sound and an omission also became good.
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250 [Jebel] XC, SUZUKI DJEBEL250 [Jebel] XC
It is used by djebel 250XC. He wanted to change an exhaust sound and it purchased. By exchange of only a silencer, setting is not carried out especially. Therefore, a feeling of Power is completely equivalent in it being pure. although it
It is used by djebel 250XC.
He wanted to change an exhaust sound and it purchased.
By exchange of only a silencer, setting is not carried out especially.
Therefore, a feeling of Power is completely equivalent in it being pure.
although it is an important sound -- TAPAPAPA -- it is the dry tone quality called ..., and is the level which loud sound is emphasized as compared with the pure silencer, and was called kana ? also with a little large sound volume.
Having ridden to a crisp sound, it is felt pleasant.
It is too annoying at the time of the engine start in a residential street, and when does a complaint come? Although the super tps of low-pitched sound who had equipped before were effective and tone quality was good, it throbbed.
Although it is expensive, a design is also one article which quality is also perfect and we can recommend to you as an exchange silencer by Hideyasu.
View detail