Reviews
Used for lubricating Clutch Wire
I used it to lubricate the Clutch Wire because the movement of the Clutch on the Grom was getting heavy.
The lubrication process was easy.
Thanks to this, Clutch has become lighter.
However, during the lubrication process, some oil leakage will occur from the gaps, so be sure to prepare dustcloth.
View detail
Items to Buy
Grease does not leak at all and can be properly lubricated all the way to the end.
We recommend that Type vehicles with adjustments in the middle of the Wire lay Dustcloth, as there will be a slight leakage from there.
Note that the type with Dust Boots on the Clutch Side must be removed, otherwise it will only increase the internal pressure and will not come out.
Once the wire is pushed out from the Clutch Side, it is just a matter of stroking the wire by hand and letting it blend in.
View detail
I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful.
I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful. View detail
[the attached vehicle type and mileage] -- vehicle type: -- benly 90S (frame numbered machine: HA03-1600XXX) mileage: -- it purchased to the grease up of about 15000-km [reason for purchase] wires (an axel, a front brake, a clutch). [Comment and cauti
[the attached vehicle type and mileage] -- vehicle type: -- benly 90S (frame numbered machine: HA03-1600XXX) mileage: -- it purchased to the grease up of about 15000-km [reason for purchase] wires (an axel, a front brake, a clutch).
[Comment and cautions at the time of attachment] There is no fault in a motion of wires and I thought that grease up might still be unnecessary.
However, the slide became good, so that he was surprised, and after grease up became very good [ a usage feeling ].
Although the grease up work of a wire was not difficult and was carried out, troubles were suffered comparatively.
After a fundamental work procedure loosens and removes a wire, grease is only poured in using this product (wire injector).
In my case, pains was taken over pouring of grease.
Attaching a wire injector certainly was a hang which works well.
It seems that it is good to once stop pouring and to reattach an injector when grease blows off.
In order that a tool might remove wires other than an injector, the open wrench (8, 10, 12 or 14 mm) and the phillips screwdriver were used.
Special care of the grease up work of a brake wire and a clutch wire was not carried out.
However, because the die length of the wire which can be pulled out was short, attachment of an injector was moved by carrying out difficulty for some.
An axel wire (in the case of the benly 90S) has an exit in the inside of a carburetor.
Grease up was performed after removing the throttle bubble portion, before pouring in grease.
In addition, the KURE silicon grease mate which invades neither a rubber nor resin was used for grease.
View detail
They are items indispensable to oil supply of a wire for the time being.
They are items indispensable to oil supply of a wire for the time being. View detail
-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently --
-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently -- View detail
You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out?
You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out? View detail
Although the gummed cloth tape was made cylindrical and the wire was oiled until now, after purchasing this wire injector, working efficiency went up several times. Since it can use throughout life and 1000 yen will not be carried out once it purchase
Although the gummed cloth tape was made cylindrical and the wire was oiled until now, after purchasing this wire injector, working efficiency went up several times.
Since it can use throughout life and 1000 yen will not be carried out once it purchases, in the often lubricated direction, it is recommended.
View detail
DAYTONA Wire Injector Wide Type
About quality and texture - Top quality. Light weight but solid alloy construction with handly knurled adjusting screws. About the feeling of use - Very happy with how this tool has made a job that I avoided in the past now become part of my annual motorcycle maintenance. Products to buy together - Along with a suitable lubricant I recommend the disposable gloves that Webike sell to keep the hands clean as I find this job very dirty and messy with all the lubricant pushing the dirt out from the cable. Difficulty of installation - Simple to set up this tool, just make sure it is firmly pressed up to the cable sleeve to minimise the lubricant leaking out. Apply the lubricant and move the cable thru its full range of motion to help the lubricant on its wayto the other end. Cost performance and comparison with other products - There are a few cheaper options from other brands but I find my other tooling from Daytona Garage great so am sticking wih them for my motorcycle tooling requirement where I can. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - Daytona offer a standard and wide type wire injector for the same price, I would recommend the wide type as it has 2 adjusting screws to firmly secure the tool in place. View detail
Maintenance！
[How is it used?
Brand：YAMALUBE:YAMALUBE
Wire grease
Item number:907934006000
https://www.webike.net/sd/3460985/
I used it with
How was your experience with it?
This was my first time with Maintenance, and I felt secure because it was firmly fixed in place!
View detail
You can throw away everything but this.
[How is it used?
of those already using it. Throw away everything but this." The first time I bought the product was when I saw an impression of the product.
It took a lot of courage to invest nearly 5,000 yen in a wire injector, but I was dissatisfied with all the wire injectors I had used so far (*such → https://www.webike.net/sd/2073358/), so I decided to take the plunge and buy one. I was not satisfied with all the wire injectors I have used so far, so I decided to take the plunge and buy one.
In case you are wondering how many times the general wire injector has been replaced (tightening Dial is Quantity:2pc. I have a Set! (and as a result of buying more every time there was a change), so I have 3 or 4, but I don't use them at all.
Classic "Put engine oil in a Vinyl bag and hang it up. This is because you can't hit a Tai KATANA on the method.
Was the one you received as per Image?
As per Image
Translation (Instruction Manual for enter here is included and easy to understand.
How was your experience with it?
Perfection！！！
The oil was perfectly lubricated, with no spurts of oil from the gaps.
What's more! We want to carry out the process of flushing out the dirt inside before lubricating, but until now, the only way to do this was to completely remove the Wire and put it in and out of the kerosene container by hand...etc.
However, with this product, after Parts Cleaner is sprayed, it can be quickly pressed down for cleaning at a great speed.
Gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo!
[Points to note]
The inside rubber packing is oriented.
You will not make a mistake because it is written in the Instruction Manual, but if you lose the Instruction Manual (and you probably will), take a close look at the shape of the Case and Packing to make sure you do not make a mistake.
If you look closely, you can see that the Taper is different!
Also, the Button part to push in is hard at first, so lubricate Large.
If it's not lubricated, it just hurts the belly of the finger that pushes it in.
How did it compare to other products?
The other Cable injector is Garbage.
Replace it now and throw it away.
Points and hangs of ▼ installation/Items to be purchased together/Opinions and requests to the Manufacturer
Other Cable injectors usually have the Body as Material:Aluminum, which is a material with a Body:Plastic, so I'm a little concerned about hydrolysis over time.
View detail
I rarely use it, but...
[How is it used?
Very occasional, Cable maintenance.
Normal use
Was the one you received as per Image?
Anodized is a luxury.
Blue and Gold. beautiful.
Screw is also Knurl and easy to turn.
Rubber is also resistant to deterioration.
How was your experience with it?
Convenient to have
[Points to note]
none in particular
How did it compare to other products?
unknown
Other items that would be helpful
New boxed and stored.
View detail
HANG is there.
It is sometimes difficult to use the Oil in a normal way.
It will go in when you adjust the tightness and the amount of oil blown out.
It may be a matter of familiarity.
It didn't work at first, but now I know how to use it.
View detail
Less Chemical waste.
It helps with Throttle and Clutch Wire lubrication.
If you don't have one, you can just lubricate it steadily, but if you have to do several, it will take an endless amount of time.
If you have one of these, it's worth buying because it's a big efficiency boost!
View detail
![Cable Injector [Wire Injector] Double](https://global.webike-cdn.net/photo/impression/0b/0b0ce4947d08d7f006d6148fe2d86d21L.jpg)
I'm just saying it's easier to do without.
I used it on a Clutch Wire that had become reluctant. I'm not sure if it's a good idea, but I think it's a good idea. It's a must have for me because I'm a bit of a pain in the ass. It is a must have for me as it is very cost effective. View detail
You can throw away everything but this.
[How is it used?
I used to use this type of Cable injector (https://www.webike.net/sd/2073358/), but I wasn't satisfied with it because I didn't feel like I was getting the lube in and it was leaking out.
I heard rave reviews about this product on the Net and wondered if it was true. I thought so I bought it and tried it.
Was the one you received as per Image?
As per Image
Other than that, there is a translation (Instruction Manual of input here is included) that YAZAWA-san may have put in. It is an easy to understand Instruction Manual.
How was your experience with it?
I was able to lubricate it without the lube leaking out due to its shape.
The Stress of lubricating the wires is gone. It is the best.
[Points to note]
There is a direction to the Rubber packing which is shaped like a piece to be put inside.
It is tapered, so you have to frame it so that the taper works.
How did it compare to other products?
The other Cable injector is Garbage. Buy a new one now and throw it away.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think more people would be happy if it were cheaper.
It's a good buy because things are good.
View detail
![Cable Injector [Wire Injector] Double](https://img.webike-cdn.net/catalogue/images/40909/tool-59_1_TS.jpg)
You can do without it, but it's better if you have it.
If it's 650 yen, it's convenient to have one if you buy it while you're there and get free shipping.
The Clutch Wire was cleaned with Parts cleaner, lubricated with CRC556, and finished with for CableGrease spray, and the Clutch was lightened.
View detail
The easiest to use wire injector ever!
I bought this one which caught my eye because I didn't like the operation feeling of Wire injector of common Type.
It is the method that the end of the Wire is jointed to the body of the cylinder shape, Grease is injected into the inside, and Grease is pushed in directly with the piston of the upper part. It is overwhelming smallness of the leak that should be noted, and it is transmitted that it is possible to oil quite efficiently from the appearance of the Grease which overflows from the lower end of Wire. Although I am not accustomed to it, I lubricate Clutch Wire and Throttle Wire, and I am satisfied with a new operation feeling that has never existed before.
Probably it is made overseas, but because Instruction Manual of the translation (please input here) is attached by the agency, it was able to use without a problem. There was an impact to dispose of the Wire injector which I had been using immediately. The price is reasonable, but I felt it was reasonable when I saw that Cylinder and Piston are made by SeaRing firmly. I recommend it.
View detail
Price suitable
It's easy to use, but the downside is that the injected Grease leaks out.
The price is low, so it's not impossible to use it, so it's a good thing.
View detail
I think things are good.
MAJESTY250 (SG03J) It purchased for the lubricating of the Accelerator Wire of the "Mere Old Man", but it was not possible to lubricate the Wire because a thing like Dust cover? was attached to the Wire.
But the stuff is solid quality!
View detail