Reviews
For electric heating Wiring
It was used for Wiring for electric heat.
I had originally been using an electric heating wiring system, but I was concerned that the current was flowing even when the key was off, so I installed this system.
It is Emon nature and it is safe.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
you get what you pay for
I wanted to install KIJIMA's LED Blinker by modifying the OEM harness, but the size was too small to connect to the common round terminal Bullet Terminal.
It was installed with Emon round terminal Bullet Terminal.
View detail
Wiring processing
The electrical system was disconnected, so I bought it in order to find the disconnected part in Tester and connect Wiring.
There does not seem to be much in the way of deterioration of the Bullet Type Terminal, but it is recommended to replace it with a new one when connecting a new Wiring. There is nothing distinctive about it, but it is recommended.
View detail
Circuit breaker30A
I have had problems while driving before, so I bought this as a preparation for long touring. View detail
For installation of Grip heater (Crimp available)
Used to install Grip heater.
SUZUKI ADDRESS110, I used it to connect from Attachment power supply to Grip heater power supply.
The only work to be done is to install the Wiring and terminals of the Grip heater into the Coupler using a Crimp to ensure that Plus and Minus are not mistaken, and connect it to the Attachment power supply on the car body side.
I have been using Grip heater for about a month and have been able to use it without any problems.
View detail
Essential Items for playing with electrical systems
It is a must for DIY of car electrical system.
I used to put together Wiring with Tie Band only, but it ended up messy and dirty.
It is an inexpensive product and we encourage you to use it.
View detail
emergency measure
Finally, the end-Quantity:The Thailand coil of GB250 CLUBMAN's clutch wire broke and I used it as a first aid kit. The wire was out of order at the point where it was cut, so I used an on-board tool to adjust the tip and cut the end-quantity.:I inserted it into the set and fastened it with the included Hexagonal Wrench. I was surprised that it worked better than I expected, and it is a good thing to have one with you when touring. I learned a lot this time because I can work faster if I have a nipper to adjust the wire. I will add a Nipper to my on-board tools. View detail
Two fine Wiring will fit.
This size will fit one standard wiring. Two wings will just barely protrude.
On the other hand, it is ideal when you want to hide just one.
View detail
Used for Wiring on Motorcycle navigator!
It is long enough and strong enough not to break. The colors are good, and above all, it is very inexpensive!
It's Recommendation!
View detail
It can be used for everything!
Wiring summary of the Security Camera installed in my home, Wiring summary around my phone, and
Wiring Summary for Bicycle, Motorcycle and Car… Use for Anything! And the price!
It's affordable and easy to cut with Scissors, so it's a Recommendation for everyone!
View detail
It's solid.
It is sturdy and tightly attached, providing ample protection.
Tanks can be removed without worry.
View detail
It can be used normally
It was rather expensive, but I needed it, so I bought it. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Can be pontooned onto X11.
I purchased this for high flash support when I converted my X11 to BlinkerLED.
Although X11 is not listed in the compatible car models, this product can be used.
The Clip for installation is the same shape as the OEM one, so it can be popped on. This product is shipped with a protector to prevent the Clip from breaking, so it should be removed before use. (It's hard, but screw a slotted screwdriver into the nail to remove it.)
View detail
Used to process Kill switch.
Emon's Coupler can be purchased with confidence because of the accuracy of the terminals included in the package to a certain degree.
If the terminals are shoddy, there is nothing I can do about it, so I try to choose something decent and quick to use rather than buying the cheapest one I can find.
View detail
KIJIMA KIJIMA Self-wrap Sleeve
[How is it used?
Dress-up Wiring in Quick shifter.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy just to wrap it around. Can be cut with Scissors to any desired length.
How was your experience with it?
It was a bit Race ish.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
K-CON Connector Set
About quality and texture The product is of good quality About the feeling of use I couldn't install it because of the wrong purchase Products to buy together Connector shape female, male. This is the set that you have to buy Difficulty of installation Installation where necessary Cost performance and comparison with other products The price is better than other companies' products and the quality is better About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing When I received the package and looked at the connector, I bought it because it was 3p in the picture on the product page, but it says 2p in the product description I'm afraid I have to use it well View detail
To fix Indicator Lamp
I used KIJIMA's LEDIndicator Lamp, which is 9mm long compared to the 7mm Holder, so the Indicator Lamp is a little tight as it is. I used KIJIMA's LEDIndicator Lamp. The cut of the Holder is not so hard, so it can be done with a cutter, so it can be easily modified to fit the place where you want to attach it.
In the past, the Indicator Lamp was fixed by making a plate with holes drilled in an aluminum plate, but when it became necessary to remove the Indicator Lamp, such as when changing the light bulb of a meter, it was troublesome to remove and attach the Indicator Lamp, so we changed to using this Holder. Although this may not be the proper way to use the Holder, I am satisfied with it because the Lamp can be held securely and it is easy to attach and detach.
View detail
KIJIMA KIJIMA Self-wrap Sleeve
The coupler can be wrapped directly around the wiring for easy installation without the need to cut the wiring or remove the coupler.
It is available in several thicknesses, making it ideal for dress-up.
View detail
It's hard for me, I'm clumsy.
Purchased to use only Male on the Led License Lamp side. Female on the body side was not necessary.
However, Male's terminal Quantity:Crimp failed on 1 pc of the 2 pc, so no more Quantities other than the one I bought at WeBig.:I had to drive 1 Set to a supply store to purchase it.
The remainder is 4 Female terminals, Male1 pc, Female side CouplerQuantity:2pc. Set, TAB coupler1pc. and will be sent to Garbage bin.
It would be helpful if you could sell the terminals only.
Or it would be helpful to add one Plus terminal each for failure.
For a clumsy person like me (laughs)
But this is expensive.
View detail
Things to use when you are not sober
This is the so-called Colgate Tube.
It is used through Wiring inside.
It can be used in a variety of ways. For cars, it can be used to escape the ROD that connects to the door handle in case of deadening, for example. (To avoid obstructing the movement of the ROD, which is movable.)
Motorcycle is not used in such a way, but rather to protect the parts of a self-made wiringetc. that would be damaged by vibration if left as they are.
In my case, I used it for Wiring protection on my previous CBR929RR.
The cutouts in the product make it easy to cover existing wiring, but it is not waterproof, so it is not recommended for use in areas where it will be exposed to water. (It may be possible to make it waterproof by wrapping it with Vinyl Tape, but I don't think it is very practical.)
For those areas, I think it would be better to use something like a CD pipe for plumbing.
View detail