Reviews
First Motorcycle mount
This is my first time purchasing a mount for a motorcycle, so I have nothing to compare it with, but I used it for about 400 km on a highway touring trip the other day and it did not shake or come off in any way. I used the Motorcycle Mount for about 400km on a high speed touring trip the other day and it did not shake or come off.
I have also gapped the handlebar at an angle, so I would recommend a straight line.
The cost may be higher than other mounts, but Merit has a wide variety of parts, so I think Merit can be applied to other applications.
Two disappointments.
? The fact that the protective Seat of the phone has Gapped. Probably, if it was bent even a little from the Fit feeling to the phone, it was pushed by Cover and became Gap.
I would like to attach a Strap in case it comes off from the mount, but it is a pity that there is no hole.
The external Strap is worn.
View detail
Plating is beautiful
It holds them in place tightly.
The plating is beautiful and Large sturdy even after several years of use.
View detail
Can be attached to SMART
I bought it because I really wanted to mount it on a Stem hole.
Another good point is that a total of six different Adapters are included to accommodate various Stem holes with different diameters.
The angle at which the phone is mounted can be selected in steps, and when the desired angle is reached, the bolt can be tightened to secure the phone firmly in the stem hole.
The texture and appearance are very good for the price there.
I think it is also very durable in environments where it is often exposed to rain and wind.
The only thing that would have been better would have been a cap to cover the Bolt hole.
If you want something good, even if it's a little pricey, this is the recommendation for you!
View detail
Refreshingly good.
It is easy to install on the motorcycle, and I use it with a dedicated cover on my iPhone. Once you get used to it, it's easy to remove and very comfortable to use as navigation. There is not much room for adjustment, so when you are checking the map, your eyes go downward quite a bit, so you need to make sure you have enough room to check the map. View detail
Very good
[How is it used?
I bought this because I wanted something high quality and easy to put on and take off my phone.
Was the one you received as per Image?
It was made of Cut-out of the Gold material and was as luxurious as the Image.
How was your experience with it?
The Moto Guzzi that I installed vibrates a lot, but it doesn't wobble while riding and the screw doesn't come loose. And it's really easy and comfortable to remove and install by just twisting the phone 90-degrees.
I like it because the Parts are not noticeable while in use and when the phone is removed, there are few Parts left on the body side, so it is very SMART.
[Points to note]
It is necessary to purchase the Parts for the fixation that attaches to the Smartphone Case separately. Because I use it with two cars. "MotoBundle Universal." (Part number:99576) was purchased at the same time.
In addition, because it is fixed Firmly, there is no escape of the vibration for the smartphone which is weak to the vibration such as iPhone, so it might be good to use Parts which absorbs the vibration sold separately.
How did it compare to other products?
I compared it with the product of SYGN HOUSE and Quad lock, but SYGN HOUSE was too tough and the price was high Pass.
There are very few compact products that can be tightened together with Handlebar clamp.
I think it's good that you can buy only the parts you need and not the whole set when using multiple units as I do.
View detail
It is a solid product.
Product installation:.
Because the Handlebar diameter is large, we have attached a Bracket to the Mirror to hold the product in place. It is easy to install.
Hexagonal Wrench is needed to change the direction of Clamp. The direction is not easy to change.
You don't need to move your phone much once you're oriented, but if you want to change directions frequently, you may find it inconvenient.
Removing the phone:.
Align the unevenness of the Clamp with the unevenness of the Smartphone Case and rotate it 90 degrees to fix your phone. The fixation of the phone and Case is firm, and I think that it does not come off at first. In addition, I think that the attachment of the smartphone body and the Smartphone Case is also firm and it does not come off.
Vibration-reducingAdapter:.
As a countermeasure against vibration, we use the Adapter sold by Option together.
View detail
I wanted a Slim Smartphone Holder.
It's easy to remove and install, and it can be attached securely.
I don't think your phone will fall unless you are on a very bad road.
I'm happy to have found the ideal Smartphone Holder.
View detail
Smartphone Holder is a must-have.
I'm happy to hear that it is very textured and vibration proof. View detail
SP CONNECT mobile phone holder
This is the SP CONNECT mobile phone holder I bought at webike. The German quality is still very good. I bought a lot of mobile phone holders from other brands before, and finally I chose the SP, which is mainly compact and easy to install. It doesn't look obtrusive and bloated. The price is not cheap, but if you are looking for workmanship and details, it is still worth buying. The mobile phone case matched with the SP is very convenient to use, and there is no need to worry about the vibration of the mobile phone. The mobile phone holder has a vibration filter system, and the quality is still trustworthy. Perfectionists recommend buying. ---------------------------------------------- This is what I bought in webike SP CONNECT phone holder, German quality is still very good. Before buying other brands of mobile phones stand a lot, finally chose SP, mainly small, it is also easy to install, it does not look awkward and cumbersome. Price is not cheap but the pursuit of workmanship and detail, then it is worth buying. SP with matching shell phone very easy to use, do not worry about bad shock shake their phones, mobile phone holder has a shock filter system, quality is reliable, perfectionist recommended to buy. Powered by Google Translator View detail
After 3 months of use.
I have no complaints.
I was worried because there were reviews that the iPhone Camera (Autofocus, etc.) would break, but so far no problems.
Does it depend on the road conditions or driving?
The price is high, and I have to buy a new Case every time I change models, so it's not that I don't have any complaints in terms of gold coin, but the ease of installation (I can take it on and off even if I'm wearing gloves) and the excellent fixation is secure and good.
View detail
No.1 ease of use
[How is it used?
I bought this one additionally because I use the Smartphone Case of SP CoNECTO.
Was the one you received as per Image?
You can choose the size to fit your motorcycle.
Because it is a plastic part, strength and durability are unknown, but it feels good to install.
It's too expensive to buy.
How was your experience with it?
If you use it with Stem Mount, it will get in the way near the key cylinder.
I was thinking, I can move the position, so I moved it to the lower side and used it, and it was nice without getting in the way of the Key cylinder.
[Points to note]
The mounting parts are plastic, so if I tighten them with the Oni Torque, won't they break?
How did it compare to other products?
The Stem Mount system is more SMART than the conventional bar mounting type.
However, it is not fixed with a screw, so I am only worried that it will not fly away.
View detail
SP CONNECT Smartphone Holder Bar Clamp Mount Pro
My motorcycle is Honda's 2020 Rebel500. I bought a German SP mobile phone holder on Webike. It is made of aluminum alloy and is well made. Because the phone holder was not easy to use before, and it was not beautiful to install, I chose this one. This one has a shock-absorbing base, which is also very convenient to adjust. You don’t have to worry about the phone’s performance during riding. The installation is also very simple. This shopping experience is very enjoyable, thank you customer service for your attentive answers and help. ---------------------------------------------- My bike is a Honda 2020 Rebel 500 and I bought a German SP phone mount from Webike, made of aluminium and well made. I chose this one because the previous phone mount didn't work very well and wasn't aesthetically pleasing after installation. It has a shock -absorbing base and is easy to adjust, so I don't have to worry about my phone breaking during the ride and it's easy to install. I am very happy with this shopping experience and I thank the customer service for their careful answers and help . Powered by Google Translator View detail
SP CONNECT MOTO MOUNT PRO
The delivery is fast, and the original authenticity is correct. It is understood that the SP brand is specialized in electronic device holders in Germany. It is made of aerospace-grade aluminum alloy, both in material and workmanship. It used to be troublesome to take with other mobile phone holders. This one only needs to be equipped with a mobile phone patch of the same brand, and this mobile phone holder is much more convenient. It is a good choice for traveling and navigation, and there is no need to worry about losing it. ---------------------------------------------- Rapid delivery, the original authentic and correct. It is understood that this brand is SP German professional to do the electronic device holder, aircraft-grade aluminum alloy material, whether material or workmanship are especially well. Previously used another phone holder pick up too much trouble, as long as installed on the same brand of phone patch just fine, matched with the phone holder much more convenient, is a good choice for travel navigation, and do not worry about losing. Powered by Google Translator View detail
feel well
I'm switching from Sandwiching Type to the phone I've been using.
First of all, it looks and feels much nicer around the Handlebar than the previous one.
I have used it at high speed, on the street, and on Dirt, and I have no concerns about its strength.
(But let's fasten it with the attached silicon band just in case.
It is very convenient because it can be done immediately with One-touch when removing the smartphone for taking a picture or checking a map at the touring destination.
View detail
First Mount (Holder)
Used in GPZ1000RX 。 Since it's an old OEM Separate handle, I didn't have that much choice, and I was thinking Handlebar Mounting, or MASTER or Mirror (with the Blind lid off), and I was torn between Quad Lock and this one.
I was worried about the short distance from the OEM Handlebar to the bolt, but I was able to install it as it is (just installed it, not running it). (I just installed it, but did not run).
I made a 3mm collar out of aluminum for clearance with the key and for future anxiety, and raised the collar about 4.5-5mm with the spring washer.
I have about 28k miles on it and so far no problems.
One.
I was hoping for another gui-mick in the locking mechanism, because it rotates with light force! 。 Well, why don't you touch it while it's running?
and the Band that comes with it is useless? Is there a different way to use it?
Many people are using it as a bar handle, but I can recommend it to NORMALSeparate handle people.
View detail
Beware of the compatibility of smartphones and motorcycles.
It's a great product, but I'm posting this because I don't want you to share the same grief as the Small job.
It won't work with the CBR650R and iPhone 11.
Maybe it's not a good fit with the CBR650R itself in the first place.
You can use it if you offset the position of the Stem installation to the top;
It would have been nice to have been able to select a few different lengths of Arm extending forward, but I can't help but notice that the ones that aren't there.
I made a long Arm in CAD and 3DPrinter and replaced it.
View detail
It depends on the vehicle type
I bought it for my VTR1000F
I chose the Stem Mount for the Separate handle
Installation is very easy
As you can see in the product image, there are 5 different sizes included in the package, so just choose the one that fits! It is
I think it depends on the car model, but in case of VTR, it may be because of the large tank Sometimes there is not much Clearance
I want to make the angle of the Body a little more, but when I point the Charge Cable, it hits the Tank It's not a good idea
This is the state that the angle is laid down in order to avoid hitting the tank when you point the charging cable
Sometimes, depending on the position of the sun, it's hard to see your phone's screen because of the glow
If you install the smartphone, the key cylinder will be hidden, so when you pull out the key, you need to remove the smartphone You have to take the
And if you install the phone with the key pointed at it, Clearance is Limit LOL
It just doesn't hit you, so it's a matter of ingenuity
View detail