Reviews
It is always used for pulley desorption of yamaha JOGZ-2 (SA04J). It should be able to be used in common with the 50~100-cc scooter of a yamaha. Although it is used very well for a long time, I would like to write the comment to embezzle. * Si
It is always used for pulley desorption of yamaha JOGZ-2 (SA04J).
It should be able to be used in common with the 50~100-cc scooter of a yamaha.
Although it is used very well for a long time, I would like to write the comment to embezzle.
* Since it hooks on the gear (crown type parts) of * kick a good place and can fix, although it is large to a band type pulley holder, especially,
It does not say damaging the feather of a drive face or giving a wound, and desorption is possible, without putting a burden on a pulley or a drive face.
Moreover, since big torque can be applied, can't it respond to the nut liable to [ which had been neglected for a long time ] adhesion, either, without sliding by a gear meshing?
Since a gear is only engaged also when using it, the time and effort of loosening or binding tight is not taken, but we recommend it strongly to especially those that desorb a pulley frequently.
* Since glasses wrenches cannot be used when loosening * nut a bad place or binding tight, a socket wrench etc. are needed.
Moreover, since the mountain of the gear (crown type parts) of a kick may be becoming more round and more round, tabling may become sweet and it may slip if it is used for a long time, please use it, pressing down by hand firmly.
Others are not found a bad place now in particular.
As a general comment, if a price is cheap to a slight degree, it is five stars without a complaint, but since there is no dissatisfaction in particular individually for Kon, I will consider it as four stars.
To those who make maintenance of a drive-line frequent, if you refer to the above, I am pleased.
View detail
They are necessaries at lubrication of a wire. Although usage is easy, if fixation of the wire side or a lubricating oil nozzle is sweet, a hang is somewhat required, oil blowing off. It is convenient, if you have one since it is a cheap tool.
They are necessaries at lubrication of a wire.
Although usage is easy, if fixation of the wire side or a lubricating oil nozzle is sweet, a hang is somewhat required, oil blowing off.
It is convenient, if you have one since it is a cheap tool.
View detail
It is an existence which must be in the glass wool exchange in the silencer of a muffler. Since a price is also cheap, the product made from KIJIMA is recommendation.
It is an existence which must be in the glass wool exchange in the silencer of a muffler.
Since a price is also cheap, the product made from KIJIMA is recommendation.
View detail
It is used for disassembly of the flywheel of a honda transverse engine, and a clutch. Although it is satisfactory to use, I feel [ of MONO ] just for a moment that it is comparatively high.
It is used for disassembly of the flywheel of a honda transverse engine, and a clutch.
Although it is satisfactory to use, I feel [ of MONO ] just for a moment that it is comparatively high.
View detail
Although most falls although the wire was pulled forcibly and oil injection was carried out from the crevice until now, and it was hard to carry out grease up, anyone gets grease up to a wire simply by this article. It is one article regarded as the p
Although most falls although the wire was pulled forcibly and oil injection was carried out from the crevice until now, and it was hard to carry out grease up, anyone gets grease up to a wire simply by this article.
It is one article regarded as the price having also been cheap and it having purchased it earlier.
View detail
If a clutch wire rusts, prevention is thought and oil is applied, isn't it experienced that the clutch became heavy somehow? Oil puts in fine sand and mud in a tube as it is unexpected. This wire louver probes the old oil which entered the inside of a
If a clutch wire rusts, prevention is thought and oil is applied, isn't it experienced that the clutch became heavy somehow? Oil puts in fine sand and mud in a tube as it is unexpected.
This wire louver probes the old oil which entered the inside of a tube at such time, sand, mud, etc.
Let's repair briskly.
View detail
It is a tool uncanny to those who want to do the maintenance of a clutch by themselves and good for them. Many things can be used for a cheap top at other things. pulley fixation -- being also alike . It may say rather than the tool specified
It is a tool uncanny to those who want to do the maintenance of a clutch by themselves and good for them.
Many things can be used for a cheap top at other things.
pulley fixation -- being also alike .
It may say rather than the tool specified by the service manual.
Probably, how this tool should be fixed using its head besides this tool should merely consider ring removal of a clutch.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
It purchased in order to remove the flywheel of KSR110. Functionally, it is satisfactory at all. It is not too bad.
It purchased in order to remove the flywheel of KSR110.
Functionally, it is satisfactory at all.
It is not too bad.
View detail
Since it was cheaper than the thing of the other company, it purchased. It is functionally satisfactory enough, and since it is not necessarily easy to break, it is satisfactory.
Since it was cheaper than the thing of the other company, it purchased.
It is functionally satisfactory enough, and since it is not necessarily easy to break, it is satisfactory.
View detail
It is used for small scooter and 4MIN. Although it tried to remove a monkey flywheel, a flywheel and adhesion were bad and purchased the skid and the YUNIBASARU holder. For fixation of a clutch etc., I regard power as exertion, engine attachment,
It is used for small scooter and 4MIN.
Although it tried to remove a monkey flywheel, a flywheel and adhesion were bad and purchased the skid and the YUNIBASARU holder.
For fixation of a clutch etc., I regard power as exertion, engine attachment, etc. being required for the direction performed by itself.
I think if a proper tool is used at the end, also prevent an injury.
View detail
Unless purchase and this tool exist simultaneously with the AB27 monkey and cam chain exchange, a flywheel does not take and separate. If KASUTAMU is begun, I will regard a cross mission clutch crankshaft etc. as liking to come to put in a hand to the
Unless purchase and this tool exist simultaneously with the AB27 monkey and cam chain exchange, a flywheel does not take and separate.
If KASUTAMU is begun, I will regard a cross mission clutch crankshaft etc. as liking to come to put in a hand to the inside of an engine.
I think that the direction which performs monkey growth by itself is a required tool.
It is handy also in price.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
The special tool was not used until now. If this is used, clutch exchange can be performed easily by itself. It is easy to fix!
The special tool was not used until now.
If this is used, clutch exchange can be performed easily by itself.
It is easy to fix!
View detail
The wire injector was used for the first time. Although it was not able to use well at first, and a cheap about 500 yen thing also has a screw by one piece easily from the 2nd time, if you buy it at any rate, isn't it that which this one says? The
The wire injector was used for the first time.
Although it was not able to use well at first, and a cheap about 500 yen thing also has a screw by one piece easily from the 2nd time, if you buy it at any rate, isn't it that which this one says?
The clutch wire has been lubricated.
Are hangs making the outer of a wire bite firmly, and fastening strongly to the extent that a screw's is called ! also now?
It may be better to put the nozzle of oil in a hole, before tightening a screw in addition.
View detail
Although the universal holder was used for removal of a pulley until now, it separated, when removing and it was going to put in power, and was suffering troubles dramatically. Although there is also the method of performing with an impact wrench quic
Although the universal holder was used for removal of a pulley until now, it separated, when removing and it was going to put in power, and was suffering troubles dramatically.
Although there is also the method of performing with an impact wrench quickly, since he would like to perform torque management firmly too, we recommend you use of this pulley wrench.
In addition, although not written to the correspondence vehicle type as the address V125, it has been used satisfactorily.
View detail
They are indispensable items of wire maintenance. Saki who does wire maintenance is completely differed from later. After he puts in a parts cleaner and takes out garbage before he blows 556 etc., he blows. If grease is attached to the portion
They are indispensable items of wire maintenance.
Saki who does wire maintenance is completely differed from later.
After he puts in a parts cleaner and takes out garbage before he blows 556 etc., he blows.
If grease is attached to the portion of Tyco, it will last long.
View detail
Unexpectedly, although at least the time of overhauling a carburetor in many cylinders is used, when mufflers are exchanged, when setting of air intake and exhaust is changed, it readjusts, or it becomes, and becomes smooth rotation. If it arranges by
Unexpectedly, although at least the time of overhauling a carburetor in many cylinders is used, when mufflers are exchanged, when setting of air intake and exhaust is changed, it readjusts, or it becomes, and becomes smooth rotation.
If it arranges by itself with much trouble, it will have and there will be no loss.
View detail
Lubrication of a wire cannot be considered without this. It is effective anyhow and convenient. It is recommended.
Lubrication of a wire cannot be considered without this.
It is effective anyhow and convenient.
It is recommended.
View detail
A display is very legible. However, since it was a little more expensive, it wavered to purchase, but since it was required when seen by long Sakka, it purchased.
A display is very legible.
However, since it was a little more expensive, it wavered to purchase, but since it was required when seen by long Sakka, it purchased.
View detail
Since a clutch wire came to have felt it heavy, he thought that he would spray lube, but a wire is not permeated well. Then, what was discovered is this product. They are necessaries at maintenance of wires. The clutch became light fairly by f
Since a clutch wire came to have felt it heavy, he thought that he would spray lube, but a wire is not permeated well.
Then, what was discovered is this product.
They are necessaries at maintenance of wires.
The clutch became light fairly by favor.
View detail
It is better to be in exchanging purity and a pure type (strengthening) clutch absolutely. Since power is applied considerably, the one to a slight degree where a handle is longer thinks that it is easy to put in power. Since it is a tool which ca
It is better to be in exchanging purity and a pure type (strengthening) clutch absolutely.
Since power is applied considerably, the one to a slight degree where a handle is longer thinks that it is easy to put in power.
Since it is a tool which can be used only for clutch exchange, I am glad if the price is cheap to a slight degree.
View detail