Reviews
As an effective use of space
This product allows for effective use of space.
I think the price is cosmetically good for a dedicated Helmet hanging.
Installation is by Screw only, so be careful with the substrate.
View detail
More than the price
Used in the maintenance of en Duro bike.
No matter how light the weight is, it will exceed 120 kg if fuel is included, so it is a bit difficult to raise and lower to ”normal” Off-road Stand.
In addition, the Off-road Stand on which the entire Under Guard is placed is not stable due to the Bolt of the Under Guard.
This STAND can lift about 120 kg, even with a child's weight, and the narrow footprint of the motorcycle makes it surprisingly stable.
If it could be raised 5cm higher, there would be no complaints. It is 3Rank higher than a similar product from PROducts.
View detail
Sometimes Ladder rail, sometimes BedExtender.
[How is it used?
Used on Hilux to carry Enduro racer.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When loading and unloading Motorcycle, it can be used as a Ladder rail, but sturdiness is not a problem. It can also be used as a BedExtender to prevent cargo from falling off the bed when transporting, and is also safe on highways without loosening.
[Points to note]
Be careful not to put on the included Ratchet as described or it will loosen.
How did it compare to other products?
I really recommend it because there are no other products similar to it. It looks cool and I have no complaints.
View detail
Chain Cleaning
I bought this for cleaning the chain and was not sure whether to use STAND or not, but I decided to use this one, which takes up less storage space. I was worried about whether the tire would turn easily until I used it, but it turned perfectly. I was able to clean the Chain without any trouble. The price is cheap and I think it is a good product. I would say it is worth the price. It seems to last for a long time. I forgot to take a picture... View detail
Used for SEROW250
I used it to replace the stem bearing on a SEROW250.
I think the hook is a little shallow, but it worked fine.
View detail
Sharp Handle with care
I'm not used to this, so I had to cut the Outer tube with this one.
It needs to be used gently.
Material without changing shape:If there were Plastic's, I'm sure they would have enough use for it.
They won't be able to cut it down.
Well, I'm not happy with it, but I guess I'll keep using it.
View detail
In unfolding the Pad!
This tool is useful when removing and installing Rear Brake Pads.
This time I used it to fix the squeal of the Rear brake. Simply insert it into the gap between the pad and the quantity:Pair (for Left and Right) Caliper is pressed simply by moving it to the The work was done quickly and efficiently.
View detail
Stable, long-term jack-up is OK
Before purchasing this product, I was maintaining the front area by using a shaft type Rear Stand on a hollow FrontShaft, but I was worried about using only the WoodBlock under the Engine to take the Front fork out for OH, so I purchased this product.
DucatiSCRAMBLER's Stem shaft bore is 27?, so there is no rattling with the included Adapter.
There is some wobble during jack-up, but once it is up, it is firmly settled.
(During the Jack-up, there was an earthquake of about 3 on the Richter scale, but Large was strong.)
The only drawback is that when the jack is jacked up at the lowest hole position, the jack is right at the front shaft, making it difficult to insert and remove the shaft.
When inserting/removing STAND under the Stem shaft, since it is a Front Fender and Limit, I think it would be better to apply Dustcloth on the Fender if you are concerned about it.
View detail
To remove Dust Seal
[How is it used?
Fork oil leakage on HUSQVARNA TE250i after Enduro race and off-road driving, sometimes after washing the car.
RiskRACING SEAL DOCTOR Seal Doctor to take Fork's Garbage. Dust Seal Remover I bought this product to get a Dust Seal at
Before I bought this product, I had to carefully remove the dust seals with a slotted screwdriver, but with Remover, I can easily remove the seals and clean the forks much easier.
The price is inexpensive and I highly recommend it to Off-road riders.
View detail
sturdy
It is solid for the price. I bought this because the one I had before was cheap and the tip was bent.
This one shows no sign of bending at all, so I feel safe using it.
View detail
Fits: Others NISSAN CaravanNV350, Others TOYOTA High ace200 series
Space would be a bit wasted.
I use it on my Narrow High Ace van. I bought the additional type for the Rear Sets because the full size motorcycle could not fit on the Rear Sets unless it was stacked diagonally.
With Rear Sets that can be shifted in front of SUPERgl, it would probably go straight in even without DirectKit.
View detail
Usable for Chain maintenance but unstable
The Lift with Damper is useful because it is the only one that allows low-floor trail bike maintenance. However, the Motorcycle shakes considerably when it is mounted. It is good for chain maintenance or temporarily lifting the front and rear wheels, but not for removing the tires to change the balance to a large one. However, it is not possible to change the balance to a large one by removing a tire, for example. In such cases, the Fixed Type STAND is the best choice. View detail
It is inexpensive but not cheap.
I use it on my NSR250R MC21 Racer.
It is a good product, inexpensive but solid.
The external cowl does not interfere with the external cowl, and the insertion into the stem hole is smooth and comfortable.
There is no Hook to hang the removed Caliper, but this is not a problem as a long S-shaped Hook can be used instead.
There is no interference with the Axle Shaft when changing wheels.
Since the Pipes interfere with each other when folded, it would be a good idea to stick some sponge rubber or the like on that area.
View detail
Costa is very good.
I use it on my Z125 and Ninja 650.
The Stem that fits both comes from the beginning.
There is no need to buy a special Stem for Mini bike separately for about 5,000 yen, like some domestic products.
The height can be adjusted to fit the Motorcycle, which makes maintenance very easy.
View detail
If I have trouble with Space, I will put it on.
If I have trouble with Space, I will put it on.
The Handlebar area of the revolver often has trouble with Space, which interferes with Handlebar navigation, so I'm going to solve this problem by adding this to the revolver.
View detail
Light thin strong!
Good product
It is a light, thin, easy to apply force handle, a tool that is rarely used but is a necessity.
View detail
Simple
I bought Wire twister and I bought Wire at the same time.
I immediately tried Wiring it, but it was stronger than I expected and harder to cut, even when I twisted it to the limit to try it out.
It is not too hard and is very easy to use.
View detail
Mounted face down.
[How is it used?
I use it on my Z900.
We replaced it because the other company's product we had been using was outside of the Screen, which made us uneasy while driving, and it interfered with the Screen when we fixed the phone.
Was the one you received as per Image?
It was just as shown in the Image. I thought it didn't look too cheap.
Was the installation difficult?
The installation itself is easy, but in my case, when I installed it as usual, it still interfered with the Screen itself, so I installed it upside down.
As a result, this was the right choice, and the mounted phone is now easier to see and Smooth to wear.
How was your experience with it?
It has only been running for a short time after installation, but it looks quite good with no blurring.
I will use the same product in the future in case of deterioration or accidental damage.
Attached to the bar itself is a SP Conecto Smartphone Mount and a USB×2.
If you pack it up, you could probably fit at least a WearLOVE LeCamera.
View detail
Off to load the car.
[How is it used?
Purchased to securely fasten to off-road motorcycle transporter loading.
Although there were also products made by DRC and OGUshow, we chose this product because of its price and the statement that it is exclusively for off-road vehicles.
Was the one you received as per Image?
The box in which it was packaged was larger than I had expected.
How was your experience with it?
I knew before I bought it that this product alone would not be enough to keep my Motorcycle upright.
The performance of the wheel chock cannot be achieved unless the Transporter is fixed to the floor or a concrete panel is purchased separately to fix the Wheel chock.
I thought it would be easier to fix it if the width was a little narrower. 21in. off-vehicle front wheel is too stiff.
View detail
A little less Grease?
[How is it used?
I am riding a SEROW225. Even with the lowest setting on the Lift Stand for regular off-road motorcycles, there was not enough ground clearance under the belly of the SEROW, so I had to lift it up a bit. When I found out that there is a lift stand for TRAIL with lower ground clearance, I thought I would like to have it someday.
Was the one you received as per Image?
It is very heavy. There is an assembly element, which I found a bit cumbersome. It took a moment. Tools are not included.
How was your experience with it?
Large success! It's so easy to get under SEROW's belly!
I like that the receiver is a Wide design, so I don't have to think about where the center of gravity is!
However, I felt that the shape and material of the Bracket, which is used to step into the Lift Stand, makes it more difficult to transmit force compared to other Lift Stands.
And it can be used normally for regular Full sizeRacer as well. If you have both, this would be the one to choose.
[Points to note]
It is partially but necessary to assemble it by yourself.
How did it compare to other products?
It is much easier to use than a regular Off-road Stand because of its lower minimum height!
However, the lightness of Lift up feels heavier than DRC's. Body weight also seems heavier. It does not bother me that much.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
When assembling, it may be helpful to slightly grease up the moving parts to make the movement smoother.
View detail