Reviews
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
Cool?
For XSR (For SEA BASS GSX) I bought it because the color was Red and the design was good for Parenthesis. I tried to put it on anyway, and it went on surprisingly well. However, the two edges on both ends are angled, so they might come off. But I was satisfied with it in my own way, so I am glad. View detail
For Racer9.
I bought this to install on my Racer 9GT.
I couldn't put it on because it didn't fit.
I think you probably have the wrong car model for the Racer9.
View detail
Meter panel not lit
MeterPanel is no longer lit, so the Panel's Quantity:I wondered if I should replace it with a Set, and decided to try replacing the Inverter for now and see how it goes. As a result, the light came on. View detail
The installation method is too chilly!
Product is Material:It is plastic and has a nice design. The only thing I didn't realize is that the only way to install it is to tie it with a Tie Band. View detail
Fits: KAWASAKI Ninja1000 SX, KAWASAKI Ninja1000
aiueo-o (Chinese dictionary arranged by rhyme, displaying the meanings of kanji)
First, waiting for goods to arrive. (3 months)
I had to wait 3 months for all of them because I bought other products with them.
I was going to order a split order, but that screen doesn't appear.
I don't know because the product hasn't come yet. I would like to Cancel my order.
View detail
Fits: YAMAHA FJ1100, YAMAHA FJ1200, YAMAHA XJR1200, YAMAHA XJR1300
Clutch lighter.
[How is it used?
Introduced on MainMotorcycle's XJR1300C.
This time, OEMRelease has been peeing Release, which is a chronic disease of XJR1300,
I was preparing a new OEM Release, and when I saw the new OBERON Release, I immediately purchased it.
Was the one you received as per Image?
The release itself is lightweight with a CNCBody and Aluminum Piston.
I really wanted to go for KFACTORY's Release, but the new ones are out of stock... and I don't want to buy used ones...
At that time, I saw a limited reissue on Yahoo Shopping, but the price was too high, about 40,000 yen, and I lost interest in buying it,
Release in such a situation, about 2,500 yen, is well built and highly satisfactory.
Was the installation difficult?
If you can bleed air, there is nothing difficult about it.
I have a COERCE drive sprocket guard installed, and I was able to install it with no problems and no interference.
Incidentally, it appears that KFACTORY's Release cannot be used with COERCE's Drive sprocket cover.
How was your experience with it?
The MASTER is using brembo's 19RCS.
When I first received the product, I found that the Release Piston was much smaller than the OEM one,
I'll have to change the size of MASTER... I've been duped! I thought.
I can definitely recommend the MASTER, as it is still the same and lighter!
By the way, Piston size is,
OEM:approx. 38mm
OBERON:approx. 25mm
(K-fac:40mm)
Yes, it is a theory that the release side piston diameter should be larger and lighter than the K-fac side, but this is not the case,
OBERON has a smaller piston diameter, but somehow it is lighter.
I did not check it until I pulled out the Piston, so I do not know if there is a secret in the internal structure.
[Included Parts:were they on?
It comes with three bolts for mounting and three crash washers. And Instruction Manual.
Crash washer was a Type I had never seen before, so I was afraid to use it (laughs).
I used Active's leftover Crash washer.
[Was there anything that disappointed you?
Not at all, it's just a shame that PistonSmall is so small that it made me uneasy at first. (LOL)
If you replace it with this, it will be lighter (not that drastically lighter, but understandable Level),
I recommend it to XJR riders because it frees them from the OEMRelease chronic disease of peeing.
View detail
Good for those who think it's good.
I did this as the inside of the Meter was getting swollen, but if you like the OEM look (the old look), I would not do the Recommendation. It will look and feel new.
It is better to have the Double-sided Tape on the back from the beginning to avoid any hassle.
View detail
Fits: HONDA VFR800X, HONDA VFR800F, HONDA VFR1200X, HONDA VFR1200F, HONDA CBR900RR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR400R, HONDA CBR1000RR, HONDA CB750, HONDA CB400X, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1000SF, HONDA CB500X, HONDA CBR500R, HONDA VTR1000F
sense of unity
The last time I bought and installed the same Black color, I thought it would be more consistent with the same color, so I decided to buy a Blue color before the Point expired.
I like the texture but the Design is so-so.
View detail
The product is Well, and a good impression is made!
The product is designed to be used with the thickness of the Screen and [Color] I think that both the Smoke and the accuracy of the BKT installation are good.
[Color] We chose the darkest Smoke and the most expensive Screen, and we like them in terms of design.
The darker screen provides well forward visibility even when it is cloudy in the daytime, and I feel that the height of the screen is also necessary if you want windproof effect.
Screen strength also seems to be fine at CircuitLevel Speed.
The only reason I couldn't give it more than one star is that there were no instructions on how to install it and I couldn't figure out the proper way to install it.
I used 4 bolt nuts on the Headlight BKT and modified the included BKT a little to install it, but I feel that this method is better in terms of strength.
Overall, I believe we have completely fulfilled the need for increased windproofing while maintaining helicopter TESIStyle.
View detail
It is easy to install.
Hexagonal 4mm for the original
The product in question is a hexagonal 3mm.
Tools are not included.
The only work to be done is the removal and installation of Screws.
Screen hole position was also good
View detail
Installation is easy.
Hexagonal 4mm for the original
The product in question is a hexagonal 3mm.
Tools are not included.
The only work to be done is the removal and installation of Screws.
Screen hole position was also good
View detail
Tuning fork for Yamaha cars
I bought a tuning fork Mark for my Yamaha. This time, I degreased and centered the car well. The recommended environment is 15℃ or higher, so I used a dryer to warm up the car while I worked. View detail
so-so
Since the Back Mirror had been changed, we were just barely able to get it to fit with the included mounting Exclusive Bracket.
I am satisfied with the Grip heater + Hand guard in terms of thermal protection, but the resin molding? However, the plastic molding seems not to be strong enough to protect the hand guard in case of a fall.
View detail
satisfaction of long wait
About quality and texture
It took a long time to receive it after ordering, but after receiving it, it was worth the wait.
About the feeling of use
After installation, the bike was dressed up and it was pretty.
Products to buy together
Difficulty of installation
Installation is very easy and anyone can do it.
Cost performance and comparison with other products
About shipping and packaging
Any concerns, cautions, or advice when purchasing -------------------------- ----------------- About Quality and Texture It took a long time after ordering. About the Feeling of Use After mounting it, it was a bike dress up and it is pretty Products to Buy Together Difficulty of Installation Early difficulty is very easy and everyone is possible. Cost Performance and Comparison with Other Products About Shipping and Packaging Any Concerns, Cautions, or Advice when purchasing Powered by Google Translator
View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
ODAX Keiti Fuel Cap Pad
연료통 입구에 흠집이 나는걸 방지해 주려고 샀습니다.
푹신푹신한 재질이라 더 좋은거 같아요
스티커만 붙이면 되는거라 설치하기 간편합니다.
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's a soft material
It's easy to install because you just need to put on a sticker.
----------------------------------------------------------
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's soft and fluffy
You only need to attach a sticker, so it's easy to install.
I boughHt it to prevent scratches at the enterance of the fuel tank.
I Think It'S BECAUSE IT A SOFT MATERIAL
It's Easy to Install Because You Just need to put on a Sticker.
Powered by Google Translator
View detail
Let's see if this will get us through this winter!
Since I have HandlebarUp, how about the Point that prevents wind? View detail
Careful positioning and pasting
Tank Pad and Side pad are Quantities:Set and comfortable design that matches the car body.
This is a clear type that does not choose the color of the car body, but if you are not confident that you can stick it so that no air can get in, please use Material:It is safer to choose a with color type such as Carbon Style.
I messed up the position of the side pad, and the area near the tight curl at the bottom of the tank started to float afterwards.
I think I'm just not very good at it, so as long as I don't make mistakes in positioning, I should be able to apply it without any problems.
I like the product so much that I am thinking of buying it again for a second chance.
View detail
Hand guard for Rebel 1100
Installed on Rebel 1100 for wind protection in winter.
The type is fixed at two points, the handlebar end and the mirror, so there is almost no shaking due to wind pressure even when running at high speeds.
It may be an individual difference since it is an overseas product, but if no tension is applied, it will be slightly forward and down against the grips.
When installing, since it is somewhat flexible, I temporarily tightened it in two places and fine-tuned the handlebar end side first before tightening it again.
The width of the handlebar after installation is about 3~4cm, which may be due to the fact that the plastic molding is shared with other models, and the extension attached to the end of the handlebar is about 3~4cm.:Pair (for Left and Right) Together, the overall Handlebar width will be about 6~8cm wider.
The windproofing effect is not bad at all. It is a world of difference from the condition without it.
However, the distance from the Grip to the Guard is longer, so the windproof effect is not as good as it could be. As the name suggests, the original purpose of the product is to provide sufficient Clearance in the event of a collision. "Hand guard." I think it is a good idea. Especially for DCT cars, the Left Side will be very scuffed because there is no clutch lever.
Personally, I like the look of the handlebar because it feels more integrated with the handlebar than the Mirror co-tightened product.
View detail
It's okay
OEM Mirror seems to have no problem in terms of Clearance, but in my case, it's like a Limit is attached. View detail