Reviews
It was used in combination with YOSHIMURA's Sensor.
We combined it with YOSHIMURA's Water Temperature Sensor for Progress2 and installed it on NINJA.
I thought that as long as the screw pitch and radiator hose diameter were compatible, I could basically use them.
It worked fine
Blue alumite is Beauty, but unfortunately with NINJA it is not visible at all.
Quantity of Hose Band required for installation:It comes with 2pcs and the accuracy is fine and the machining marks are beautiful.
I think the quality is better than the price.
We recommend it for those who want to raise the price.
View detail
![9.5sq. Socket Set [6 Pieces]](https://img.webike-cdn.net/catalogue/18428/ntb306a_TS.jpg)
nepros of longing
High-end tools nepros
KTC is more than enough for maintenance, but this is a hobby world.
I'd like to take care of the tools, too.
However, it is not a price you can buy with a bang.
Only frequently used Ratchet and Socket nepros
The construction looks like it took a lot of work for the price.
But it's SK11 that's easy to use.
I don't mind placing it directly on the ground or dropping it a little.
Each time nepros are used, they are gently placed on a cloth to prevent damage to the Large.
If I drop it, I could probably dent it for a day.
Well, nepros is a tool for hobbyists, including that.
View detail
I needed it for RamMount.
I was in a hurry to buy this Screw when I tried to install Ram Mount. I had no idea it was Inch. I chose this one in millimeter because I would never use Inch Screw in the future.
I have to look at everyone's Review properly before I buy.
They turned the Screw of Inch well.
View detail
Just the right length and very convenient
[How is it used?
Purchased to replace Oil in PCX125.
PCX is a little difficult to work with due to the position of the drain bolt, so I bought it to work more efficiently.
Was the one you received as per Image?
It is just as shown in the Image. It is just the right length, not too long and not too short. I felt that the texture is also good.
How was your experience with it?
I actually used it only once to change oil, and I am glad I chose the smaller size. There was a longer size as an option, but if I had chosen that one, I thought that I might not have been able to use it under a car body without space, so I am glad I chose the shorter one.
[Points to note]
Sometimes just a little bit of the tip is left on the Bolt side. However, it is usable without any problem, so Large is durable.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Buy by mistake
[How is it used?
I wanted a 30mm to loosen the Driven Sprocket on my XJR400R, but I was too lazy to buy a 22mm...
I was troubled by the fact that 22mm is not particularly useful.
It's my own fault and I can't help it.
Was the one you received as per Image?
It looked very nice and luxurious.
I am going to use it because it is an opportunity.
[Points to note]
Let's all be careful not to make purchasing mistakes.
View detail
Convenient Socket adapter
[How is it used?
Used for tightening at 40N-m when cleaning and installing Caliper on XJR400R.
I have two Torque wrench, one for ~25N-m and the other for 40-140N-m, but one of them has a 12.7mm insertion angle. (1/2-inches) and the other is 9.5mm (3/8Inch) The Brembo caliper mount bolt is 12mm, but the 12mm socket I have is 9.5mm. (3/8Inch) So I needed a conversion and bought this one.
Was the one you received as per Image?
It was just as Image.
I think you can find them at Home center, but I'm glad to know that they are not available at small places and that it is cheaper to buy them here.
How was your experience with it?
Thanks to this, we were able to tighten it with a solid Torque.
I want to make sure that the Brake area is secure because if anything happens to the Brake area, it will be Large strange.
How did it compare to other products?
I have seen other manufacturers' products, but I think this one is the cheapest and has the best cost performance.
View detail
conversion
I bought it to install a plug wrench on a small type ratchet. View detail
Resin Holder for easy insertion and removal of Socket
This Material is definitely better than Gold:PlasticHolder is easy to use.
Material:The Piece of Plastic Holder is stuck on two Gold rods, and the Material such as Shibuichi, 3/8, 1/2, etc.:It can be used to replace PlasticHolderPiece.
Gold genus products tend to loosen and ruin rather quickly once you start using them. This Holder is easy to insert and remove, and I definitely recommend it.
View detail
Mistook it for a hexagon and bought it.
[How is it used?
I bought this to loosen the Driven Sprocket on my XJR400R.
Was the one you received as per Image?
I did not read the product specs carefully and bought it thinking it was a hexagon, but it was a dodecagon.
It is not impossible to use a 12-square, but the way the Torque is applied changes from a 6-square to a 12-square, and it is difficult to use in places where considerable force is required.
How was your experience with it?
I still could not loosen the force well.
This caused a little damage to the Nut and I failed. This was my own fault, though, so I had no choice.
The product is inexpensive and easy to use.
[Points to note]
Read the product Spec. carefully!
It makes me sad when I buy tools I don't use lol.
How did it compare to other products?
I later purchased a similarly priced hexagonal VERSION.
I think the quality of this product is slightly higher.
View detail
Robust tool.
[How is it used?
I purchased this to remove the Oil Inspection Bolt on the lower side of the Engine on my CB1100.
Was the one you received as per Image?
It is a robust tool that does not seem to break down in the slightest.
How was your experience with it?
I was prepared to remove the bolt because it was the bolt of the engine part of a Large Motorcycle, but it came off so easily with this tool that I was surprised.
[Points to note]
If the Engine Guard or something else interferes, it is a hassle, but it is necessary to remove everything.
How did it compare to other products?
I don't know about other companies' products, but a tool with a sense of security is the best because it is a part that cannot be recovered if it is licked.
▼Although rarely used, it is a good idea to have it on hand.
View detail
handy tool
I bought this DAYTONA long hexagonal socket from webike. It is a set of 7 pieces equipped with a 3/8 socket of 8-19MM. The socket is extended to 63MM to screw some deeper screws. A socket bracket is also given as a gift to store these sleeves well. The steel is of good quality and should last for a long time. -------------------------------------------------- -------- The DAYTONA long version of the hexagonal sheet I bought at Webike. It is a 3/8 sleeve with 8-19mm. The sleeve is extended to 63mm to twist some deeper screws. A socket bracket can also be given a good storage of these sleeves. The quality of the steel should be used for a long time. Powered by Google Translator View detail
I purchased this for Belt tension adjustment of the YamahaBOLT Shoulder Bag.
To adjust the drive belt of the YamahaBOLT Shoulder Bag, a 27mm and 22mm Socket or Wrench is required.
This time, a 1/2 square Torque wrench and a Quantity:Purchased and worked with Set.
Socket and Hex recently purchased and worked on this product because they love TONE products.
There were no problems with quality or accuracy, and the work itself was completed quickly and easily.
View detail
Very easy to use socket holder
Mounted on Tool wagon which I always use in Garage.
Magnet will stick firmly to the steel plate.
Until now, it was necessary to use both hands to remove the Socket from the Holder, but the Magnet is so powerful that the Socket can now be removed with one hand.
I don't feel very Stress when I do maintenance and my work efficiency has improved.
I highly recommend it.
View detail
Reliable TONE products
[How is it used?
Used for removal and installation of exhaust pipe of YAMAHA XJR400R.
I wonder if the product is the same etc. as the 8mm hexagonal.
Was the one you received as per Image?
I checked the actual product at a mass retailer before purchasing and it was as per Image.
How was your experience with it?
I used to use an ordinary hexagonal tool to remove and install the exhaust pipe, but it was a bit odd because I had to use a lot of force in a narrow space. I was also worried about managing the Torque by hand, so I took the plunge and purchased this product, even though it is a bit pricey. After purchasing this product, it can be used for Ratchet and Torque wrench, so it is quite easy to use.
Also, since it is a TONE product, the quality is good and will last a lifetime.
[Points to note]
None in particular
How did it compare to other products?
There were other products at lower prices, but the most decisive factor was the long hexagonal part.
I was concerned about damaging the exhaust pipe if this part was too short, so I chose this product, which is as long as possible.
View detail
"Japan" It's a one-of-a-kind Tools Set!
I think it is a tool set for personal level and can be used not only for motorcycle but also for bicycle maintenance.
Except for heavy maintenance, this one (and a few more) will do the job.
The quality is unquestionable, just like in Japan! I think you will not lose anything by buying it!
View detail
It works fine.
[How is it used?
Compressor at home and Air duster of the same Brand (https://www.webike.net/sd/23110545/) I purchased this product in conjunction with the purchase of
I referred to Air duster's product description and chose this Screw size as it fits.
How was your experience with it?
The product itself could be used with no problems at all.
We also installed a Spray gun at the same time, which also came with the One-touch plug, but the Air duster was also included in the package. (Lol)
So, I originally did not have to buy it, but I did, so I kind of replaced it and am using it.
How did it compare to other products?
It is naturally no different in any functional way from the one originally included.
I use it in combination with an air hose of another brand, and I don't see any air leakage because it is a standard product.
[Points to note]
The Air duster of the same brand does come with a one-touch plug!
【Review】
Naturally, there were no problems at all in combination with other Brand's Air hose.
It is inexpensive, but it works well.
View detail
No problem
[How is it used?
Installed Compressor at home for painting and Spray gun of the same Brand (https://www.webike.net/sd/23110537/) I purchased this product in conjunction with the purchase of
I chose this Screw size because the Spray gun said it would fit here.
How was your experience with it?
The product itself could be used with no problems at all.
However, the Spray gun also came with a one-touch plug, so it was not really necessary.
I was so determined that I decided to replace it with this product and use it.
How did it compare to other products?
I have not experienced any one-touch plugs going bad, but they are inexpensive and I have had no problems with them.
[Points to note]
SK11's Spray gun comes with a One-touch plug! (Lol)
Also, I would like to have Seal tape.
【Review】
It is inexpensive, but I had no problem using it. Naturally, there is no air leakage.
Don't forget to prepare seal tape and a 17mm Spanner for replacement.
View detail
When double nut is not available.
I bought this to pull out the sprocket bolt on my SR400.
The reason why we went to the trouble of purchasing the hub clutch is because the SR400 hub clutch has a convex shape for CenterRinging the Sprocket.
This is because the distance between the convex part and the stud bolt is so close that a double nut cannot be used.
I was wondering if I would have any luck using the OEM Nut since it is so thin. Unfortunately, the second one bites only one pile and cannot hang Torque properly.
I had no choice but to buy a special tool.
Still, it was a bit odd to remove the screws because they were coated with screw locks and mine were very sticky.
Fortunately, since it was a RoseRose, access was possible from the back, so I was able to finally remove it by searing it with a raspene, drilling a hole in the center, and pulling out the Torque.
The structure of the Stud bolt remover consists of three Pieces that move and hold the Bolt when it is rotated.
The structure was like a Cell starterClutch.
The screw threads are held in place by the three pieces of the bolt, either on the face of the screw threads or by a line perpendicular to the screw threads, so the screw threads are crushed. Basically, the removed stud bolt cannot be reused.
Since it is possible to engage the stud bolt in the reverse rotation direction, it is possible to loosen the Opposite Thread Screw or tighten the Normal Thread Screw, but as mentioned earlier, the screw threads will be crushed, so it will be a very special application when used for tightening.
It can be used for round bars as well, since it does not need to be screwed structurally.
Maybe it would be good for a sticking Knock Pin or something.
I purchased For M8 this time, so I can use it for Big bike's Exhaust System and so on.
If you have For M6, I think you will have no problem with most large stud bolts.
View detail
MirrorTool！
Nepros is the best MirrorTool available.
It is accurate and lightweight, which is helpful for Motorcycle tinkering.
View detail
The Socket that never misses
First of all, you can't go wrong with a Socket, and I think KTC is just right for motorcycle tinkering. It is a good product with accuracy and strength. View detail